TAURI Compatible With Samsung Galaxy S22 Ultra 5G, 2 Pack Flexible TPU Film Screen Protector + Camera Lens Protector [Easy Install] HD-Clear [100% Fingerprint Unlock] Bubble Free

This screen protector is a solid choice for keeping your phone protected without affecting usability. The TAURI TPU film is flexible and fits the Samsung Galaxy S22 Ultra well, covering the screen smoothly with good touch sensitivity. It’s easy to apply with minimal bubbles if you follow the instructions, and the clarity remains sharp for everyday use. While it may not feel as rigid as glass, it does a good job at preventing scratches and minor wear. Overall, great value—especially with the 2-pack included.

A beautiful thing. I've just fitted the replacement s reen protector. Nice and slowly. Super clean with rubber gloves on to reduce finger grease. The best fitting I've ever achieved. A super soft feel with zero delay and pin precise screen touching. The main event for me is that this set has FULL GLASS LENS PROTECTION. Where others have just a plastic ledge. This model comes with TWO GLASS SURFACE LENS PROTECTORS. THANK YOU TAURI FOR A SUPERB KIT.

The screen protector itself is nothing special. Its a standard plastic film with a bit of a gel-like coating on the front (which gives it its healing properties). I found my nail marks do indeed disappear after a day but I doubt anything more substantial would heal as well. My main praise though is to do with the installation procedure. I've never installed a screen protector like the way they instruct you to, but I've never been more impressed. The guides are so simple to follow and the final product is a super clean installation with 0 (yes 0) bubbles. When installing the screen protector the dust sticker is your best friend; just before you apply the protector make sure to use the sticker to remove any dust particles to ensure they don't get trapped underneath (Doing this before each step is advisable as dust always seems to land on the screen). I haven't used the camera protectors as I've heard its a hassle to remove them, so for now at least I'll leave them alone. I gave it 4 stars because I'd rather have the option to get 3 screen protectors instead of 2 and ditch the camera protectors. This way it would at least get value points from me. No complaints other than that.

I am absolutely blown away by the TAURI 2+2 Pack Screen Protector for the Samsung Galaxy S21 Ultra! This kit provides the ultimate defense for my device while maintaining pristine clarity that showcases the phone's stunning display. The inclusion of 2 PCS of Soft TPU Film and 2 PCS of Camera Lens Protector ensures that every inch of my phone is shielded from scratches, smudges, and potential damage. The camera lens protectors even go the extra mile to safeguard my precious lenses, allowing me to capture Instagram-worthy shots without any worries. One of the standout features of this screen protector is its 100% Fingerprint Unlock capability. I was skeptical at first, but the unlock experience is seamless and responsive, just like using the phone without a protector. It's like magic - only better! And let's talk about installation - the Bubble-Free technology is a game-changer! Applying the screen protector was an absolute breeze, and I appreciate that I didn't have to deal with any frustrating air bubbles ruining the aesthetics of my phone. In terms of touch sensitivity, the TAURI protector has aced the test. I can confidently say that my interactions with the screen are as smooth as ever, without any lag or loss of responsiveness. All in all, the TAURI 2+2 Pack Screen Protector Designed for Samsung Galaxy S21 Ultra has exceeded my expectations in every way possible. It provides a level of protection that matches the phone's premium quality, ensuring that I can enjoy my device without any nagging fears of damage. If you want to keep your Galaxy S21 Ultra looking brand new while enjoying its incredible features, do yourself a favor and invest in this screen protector. You won't regret it! 📱✨ Your phone deserves the best, and TAURI delivers in spades! ✨📱

I bought several brands of the plastic TPU screen protectors for the Galaxy Ultra S21 at differing prices. All these different brands have exactly the same plastic screen protector but the rear camera lens which is tempered glass varies slightly as in some are black and some clear. The screen protector is relatively easy to apply without bubbles and is easy to align. The protector is the same size, same material and same instructions in all the brands I have seen and whilst it is described as completely covering the screen along with "case friendly" which means it covers the flat part of the screen and not the curved edges. In the Samsung Clear View case there is very little unprotected glass showing. It is possible to make a TPU protector that goes on to the curved edges as I have had these for the S7 Edge. The fingerprint sensor works fine although it sometimes tells me to press firmer on the screen. The S21 Ultra has a sensitivity setting for screen protectors. I prefer the plastic film TPU to the tempered glass as I find with curved screen edges (S7 edge experience) the tempered glass does not stay in perfect position for long as it is only stuck by the edges and ends up clicking as it moves against the screen on the curves. The camera protector is a totally different issue and varies between suppliers, I suggest that you do not use it. There are several problems with it: 1. Firstly it is too thick to use in one of the Samsung close fitting cases such as the Clear View or LED View, it pushes the phone up in the case so that the power and volume buttons do not align with the case buttons and do not work. The Samsung case holds the camera deep enough to protect the lenses. 2. It distorts the high resolution pictures, in reality only a coated lens should be outermost on this camera. 3. The glue is so strong it is extremely difficult to remove from the camera. The glass broke into pieces before it could be removed and I had to pick it from the camera bit by bit by fingernail to avoid marking the phone and lenses. Others have experienced this. Update: I was having some minor sensitivity problems and have found out why. The S21 Ultra (UK version) already has a factory fitted thin screen protector installed when it arrives which is very difficult for someone of my age to see and also a clear disposable protector (with a tab to remove it) on top of that. So once I installed the TAURI protector I had two protectors on the screen. I have taken the TAURI off without disturbing the original and was surprised how thick the TAURI was and how clear considering the thickness. I will use the other one from the TAURI pack once the factory fitted original needs replacement.

UPDATED: DO NOT USE THE ELEMENT INCLUDED TO "PROTECT" THE REAR CAMERA ARRAY! I should have read the review of someone who mentioned this before. It screws with your photography, particularly in artificial lighting - creates a polarising effect. I can't take photographs in rooms with ceiling mounted tubes as the light as captured now "rolls". I could not take accurate photos relevant to an unrelated complaint earlier, as the camera could not focus. --- Purchased to replace Samsung's screen protector which did well tbf (had my S21 Ultra since near launch). This looks great, or should. No apparent issues with the read camera lense protector which was easy to apply though. Main part less so - the actual protector layer itself seems difficult to apply compared to the video - note mine did NOT ship with the grey backed fixation stickers etc shown in the video. The alcohol wipe was actually completely dry with only a scent remaining. So I have small air bubbles across the entire top half of my S21 (the removable layer cover backing splits halfway down), and around the edges across the entire front. It appears it slipped during installation too - unlike the Samsung original, this has a cut-out for the front lense, it doesn't cover it. This seems odd as it seems to be of the same thickness. So I now have an edge of the cut out across my front camera, and air bubbles. This pack contains two protectors, and installation of the main went so badly attempted with the first, that I tried again with the second. My fingerprint scanner works and touch sensation seems fine, but the mere presence of air bubbles will incline me to replace this soon, with something from a different manufacturer. They're annoying, can be seen in reflecting light and when displaying light colours, and the card supplied to press them out is only sufficient to remove larger air bubbles.

I looked around a lot before settling on this one, it appears most aftermarket manufacturers are turning away from using tempered glass due to the problems involving the touch sensor. BUT BEWARE, this will RARELY protect you from a direct drop on the screen onto a hard surface, you are still at massive risk if the screen is dropped onto a hard/sharp surface, this protector is more for preventing day to day wear and scratches with a focus on easy replacements, a tempered glass protector is still a better option in that regard. You are better off also combining this with a raised front edge case. Theres not much else to say other than its nice, applies nicely and will do the job protecting the screen, paired with a quality raised front edge case will protect your phone from the nastiest of falls A FEW HELPFUL NOTES TO ANYONE DOING THIS AT HOME: First, watch the installation instructions! Once, and then once again! It took me 3 separate times before I got it right (having to order it twice), mainly my own fault. Whoever was installing it in the video must have been inside a dust free NASA space lab, because after cleaning the screen it will begin to immediately collect dust. ENSURE, your work space is sparkling clean, and use a duster/hairdryer to blast any dust away when you are ready to place the still covered protector on your screen, ONLY then take it out of the bag and do not waft it around, Once before finally pulling the tab upwards to apply one side of the screen protector, lift it up gently and check the underside your screen is clean because magically It still somehow had more dust than before cleaning it. DO NOT pull it all the way to disengage and deform the seal until you are 100% ready, or you're screwed as the screen protector seal with the plastic is broken and will leave a perfect horizontal line of dust, put your finger on the part where it will unseal to give you safety to undust your screen again. Other than that, dont hesitate with the movements, be clean and swift and dont be afraid to use a little pressure with the fabric lines smoother thing!

I am so impressed with this screen protector. If you follow the video instructions it fits perfectly and aligned to the phone. It is very clear and the camera protector is a bonus. Everything you need is in the box. I can't recommend enough

Sí funciona para la huella dactilar pero es delgada la membrana

Very well thought out for ease of install! Super easy to get on. No bubbles! And no issues with a case. Would buy again

Item of no use to me want to return it

Like other reviews state, u do need to watch the video they provide to install it smoothly! With the curves edges of an S22 it can become a bit tricky, my first protector didnt want to detach itself properly from the film resulting in it stretching and being unusable, which honestly might have been my clumsyness. The second one in the package went on smoothIy it does take quit some time to take out most bubbles, and a small hair got stuck but still looking great. contacted Tocol about this (the broken one and the hair) and they immidiatley offered to send a new one. If u have somewhat of a decent case that protect the edges of ur curved screen u might have to push the protector into the edges of the case a bit for it not to come unstuck. Besides that, i have no complaints whatsoever, and my fingerprint scanner works just as great as before.

Meine vorige Folie war die originale von Samsung. Nun nach einem Jahr hat diese jedoch einige Kratzer und sieht nicht mehr gut aus. Daher war es Zeit für eine Neue. Ich war am Anfang etwas skeptisch bei diesem Produkt von TAURI.: - Verkäufer aus China - 10€ für 2 Folien - Eine seltsame Kombination von Schlagwörtern im Name Daher habe ich die 2100 Rating mit ~4.1 Sternen von ReviewMeta überprüfen lassen, und es stellt sich raus, dass keine Fake Reviews dabei sind. Ein Amazon Produkt ohne Fake Reviews! Dachte nicht, dass es die noch gibt. Folglich habe ich sie gleich bestellt zum ausprobieren. Der Inhalt ist ordentlich. Alkoholpads, Staubsticker und die Folie gibt es doppelt. Dazu gibt es noch ein Microfaserputztuch, ein stück Pappe zum Blasenentfernen und eine USB-C Folienhalterung. Die Folie hat eine nummerierte Struktur, damit man jeden Schritt in der richtigen Reihenfolge machen kann. Hat mich komplett überfordert. Daher, wie überall auf der Verpackung vermerkt, erstmal das Erklärungsvideo angeschaut. In diesem wird jeder Schritt vorgemacht, damit man ihn selbst gut nachmachen kann. Also, Handy geputzt, 1. Folie abgezogen, auf die USB-C Halterung gesteckt und dann auf das Display aufgesetzt. Staub. Es gab so viel Staub unter der Folie. Das gewählte Zimmer war vielleicht nicht die beste Wahl. Folie wieder entfernt, noch einmal Handy geputzt, wieder aufgetragen. Ein Haar. Folie wieder entfernt, Handy und Folie geputzt, wieder aufgetragen. Luftblasen. Versucht mit dem Stück Pappe die Luftblasen zu entfernen. Nach einer Weile habe ich aufgegeben und habe einfach weiter gemacht. Als nächstes musste ich die obere Folie entfernen und dann von unten mit dem Pappstück die Folie nach oben andrücken. Getan. Dann das gleiche von der anderen Seite. Zum Schluss den Rand andrücken und die obere Folie entfernen. Nach dem Staub und Haar Fiasko habe ich nicht mehr viel erwartet. Wie ich mich getäuscht habe. Ich weiß nicht wie oder warum, aber die Folie sitzt perfekt, ohne jegliche Luftblasen, Staub oder Haare darunter. Ich bin voll begeistern. Einzig der Rand ist nicht so gut wie bei der originalen Folie. Dort war er abgeflacht. Hier spürt man ihn mit dem Finger. Sonst habe ich absolut nichts zu beklagen. Sogar der Fingerabdrucksensor funktioniert zu 100% ohne dass ich ihn neu anlernen musste. Wirklich ein tolles Produkt!