WT03 Micro FPV AIO 600TVL Camera 5.8G 25/50/200mW Adjustable Transmitter with Cloverleaf Antenna for Mini Aircraft

This is a great little camera for the money. It definitely runs hot but the quality and range is amazing for the money, and I love being able to select the power of the signal. I don't like the lack of info regarding the battery connection. Just calling it a JST or JST1.25 is messed up. It's a Molex plug, and having not messed with it these things before I had no idea that just knowing it was JST wasn't enough, it's a specific TYPE of JST which has sone crazy 50005 number or something but apparently people just call it molex.You know I've been messing with computers and tech for nearly 40 years, and crap like this is why I'm bald and mildly psychotic. There is SOOOOOO much information about the different frequency bands and the exact voltage and all the other things you'd possibly ever want to know.But if you can't just look at that connection and know what it is, you are up a creek my friend.RUFUS! TELL PEOPLE YOU NEED A MOLEX CONNECTION FOR THE BATTERY MOLEX BATTERY CONNECTION MOLEX BATTERY CONNECTION MOLEX BATTERY CONNECTION MOLEX BATTERY CONNECTOR MOLEX BATTERY PLUG YOU NEED TO USE A MALE MOLEX BATTERY CONNECTION RUFUS! TELL MY PEOPLE RUFUS! MOLEX MOLEX MOLEX!

Great solid little camera. Has some noise but other than that its pretty good for the price.

Using these on micro RC planes (Volantex Ranger 600sp, 400mm T-28, Cub).I cannot find a pre-made mount (plenty with 14mm width, this is 20mm) anywhere.Have it zip-tied to top of plane which is pretty janky.Get ~500' of range, without obstacles, on 25mW setting with Fatshark Recon headset.Good Field of View.Going to DJI soon so this'll be the last of analog FPV for us.

The packaging was decent, the instructions were easy to follow and was able to set it up and get it running in about 2-3 minutes. The camera quality is decent for its size. The range at max is pretty good and will not loose signal when going behind a couple walls in your house. The speed is pretty good and it feels like there is little to no delay from the goggles to the vtx. The only things to keep in mind is that the unit gets very hot when used at max power and the antenna is easy to bend so be careful when setting it up. Otherwise it’s a quick and fun way to add a VTX and Camera unit to your drone or rc car.

Great little units ...250mw offeres 600' range w ferry little break up ...please continue making ...perfect size for FPV ..100mw would be nice ..25mw just not enough

Thanks

I wish I got this some years ago when I saw they were released. It is super easy to install and use. I just use scotch tape, double sided foam tape or zip ties, the button on the camera, and cheap betafpv vr02 goggles and its buttons to find the channel, pretty straight forward.The camera quality is good for this price and I get reasonable range with little interference (at least a football field length, don't want to go much further anyway for micro/mini aircraft in case something happens and have to go searching). I see many reviewers say it doesn't work, can't see through the noise.Maybe their reading comprehension, as mine, was the culprit because the instructions do say "powering on the vtx, blue LED display 0, indicating the vtx is powered on, but it is in off status without any transmission", I was getting the same terrible signal some say it has. Surprised I got any at all now that I know why.I changed it to 3 -'s stacked to get the most power (i thought it was supposed to show in goggles but finally looked at the display on the camera's board). It goes further than my micro whoops that say they do 200mw and those can go to the ends of my flying area no problem.It does get quite toasty and may be fragile if exposed to impacts as the antenna can get bent or lense scratched of course.My main complaint though is I wish there was at least some voltage display (of camera battery) so I know when it is about to cut out. There is no warning or indication it is low, just stops. So be prepared to go looking when you lose feed and hope it wasn't far and you can remember the area good, or you have record feature on your goggles so you can at least get close and hope it didn't glide far from there.A timer should be used depending on the battery size for the camera, which of course requires trial and error but there is also a list of current ranges for each power mode in the instructions for general idea. I recommend at least a 200mah for about 5 minutes highest power, and of course larger for larger aircraft that wont lose much flight time or have it at least covered by camera being remaining on when aircraft thrust battery is out. Or make a parallel adapter on the aircraft's power connector so camera can plug into 1 main battery.Also, the lens is a bit distorted for wide angle fisheye effect making distance judgment not very easy (everything is near on the edges but far in the middle, stretched in between) Of course they glue it in place with no option to remove it unless you want to start cutting.I also wish the antenna was detachable (so it can be inside aircraft while camera is outside through small hole), and the camera reversible so I can have right side up view while the unit is upside down (like for camera in cockpit window and antenna down in body). It can really affect aerodynamics with its drag and weight relative to smaller models.Anyway, sure there's these issues but I was not expecting the feed quality and range it has, not bad especially now it's down to $25, can't expect much better.

I use a few different types of 1s lipos, and these Wolfwhoop WT03 are perfect. I've bought a few in past and still come back to this specific model. Why? Well... The milliwatts is adjustable, and the higher milliwatts isn't always good, due to the radius of the output (bubble). Too high and you can't get too close with your FPV gear, so the key is having diversity on the googles with RHCP matching and a patch antenna as well.Anyways, works as intended, cheap effective and I can easily to long range FPV with no issues.