Bike Bicycle Motorcycle Handlebar Mount Holder for Mobius Action Sports Camera

I got on hear ready to write a 2 star review because this product would not fit on a 32 mm diameter flashlight I am suing for some scuba-diving camera "rigging" I am doing. There are two layers of rubber for shock absorption and fitting onto smaller diameters. 1 layer is obviously removable and the other at first appears to adhere to the plastic (why I was going to write a 2 star review), but upon cooling off I realized it could also be taken out and put back in, the more important part. For what I am using this for it will work great for the price, but I would not use this as a handle bar mount on a bike because plastic on metal will probably add a lot of unwanted sliding in addition to the lack of shock absorption.Also, If you do not remember what shipping was like before Prime, this will be a harsh reminder.

I would give this mount five stars if it wasn't for the problem with the mount moving even when locked tight. The issue is with the Mobius action cam holder. You thread the cam holder into the mount. Everything stays tight except the thread has to be tight as well and it's not always in the ideal position. When I move the Mobius holder it can unscrew a tiny amount from the bike mount. It's not a big deal and there's really nothing you can do about it. What I do like is the clamp system, which accommodates all handlebar sizes. I have the new handlebars that flare at the stem to 32 mm and this mount handles it even with bar tape. The screw clamp is also strong. I prefer having the Mobius under the bars because when it's on top it sticks up several inches, which I find distracting.

This is not a flimsy item. It has some beef to it. I have thicker handle bar and it worked well. It doesn't stay completely tight when screwed into the camera. If I pushed the camera or twisted it a bit, then it would move but not a lot. More like just fine tuning the direction. Used this on a Swiffer handle for my action cam during a 5K. Worked great. Held though the entire race. A little heavy for that use, but it stayed locked on the stick while I ran with it.

Just what I needed. This is a simple, well made mount that should support any reasonably sized cameras. I say it that way because I use it to mount a small video camera (think GoPro etc) on a mountain bike. It were on a stationary mount it would probably work with any camera. Even longer lensed SLRs. I did replace the hand tightening knob with a 4mm Nylok type nut. I did that to make it harder for someone to remove the mount and harder to have it loosen during hard riding. It looks like it should work on a wide range of bars or tubular mounts. Well designed, appears well made and for the price it simply can not be beat!!

Tended to move with vibration on handlebars of my bike but was able to overcome most of the problem by mounting camera so it was hanging below bars. Slight downside o that was camera and therefore image is upside down but video editing software easily allows image to be rotated. Decent mount for price.

I have a feeling the clutch would come I tightened if this was used on a bike for anything heavier than an iPhone. However, I use it with a camera stabilizer I have to hold lights and microphones and it works great for that. A quick release would be nice.

Good quality. Nuts are nylon or plastic though so they could possibly be overtightened and stripped. I have not and they have not but just to be aware. Very pleased with this product. It goes in my camera back everywhere!

I do get the audio vibration feedback when trying to take video on my action cam on my pedal bike so you will be able to hear the noise but if that doesn't bother you then get it.