Stern Pad - Standard Size - White - Screwless Transducer/Acc. Mounting Kit (not for Large 3D Scan Transducers) - Made in the USA with Genuine 3M VHB Adhesive

Works as advertised. Adhesion is strong and easy ti install.

I followed the directions to clean the surface and rough it up with the supplied pad and stuck it to the transom. Waited a few days and then mounted the transducer to the Stern Pad and ran the wire up the back and over the transom and used the suppled wire holders to run the transducer wire over to an opening used for the steering hydraulic lines. I then ran the wire inside the bilge to the depth sounder. The Stern pad allowed me to mount the transducer without making any holes in the boat. The sonar system worked great. Great product.

Do NOT drill waterline holes in your boat hull! This kit, using a very powerful 3M adhesive, eliminates the need for drill holes and prevents leaks. Follow the simple location and surface preparation instructions and this mount will stay attached forever. Somewhat expensive for such a simple device, but in the end, money well spent.

This thing worked great. I'm glad I bought it. It took me a few try's to get my transducer mounted at the right height, and instead of having holes in my boat I only have extra holes in this little pad. I had my boat doing 45 MPH just a few days after installation and it held on like a champ. I would recommend.

Follow the instructions carefully ; once you stick it - IT'S DONE PERIOD. I let mine sit for 7 days after install, holds my depth finder in place no problem. Just for FUN; tried to remove it. NOPE , NOPE & NOPE !!! I can see why they say you can mount other things to it.

I had just repowered the boat and had all the leaking mount holes filled with fiberglass and re-gelcoated. Last thing I wanted to do was drill new holes in the transom. This thing is legit. Works great...for a long time. No holes!

Product arrived well packaged and within the stated shipping dates. Instructions are complete and concise. Installation was straight forward and not difficult. All required items are included, even the push pin to remove the adhesive backing. Does not look out-of-place on the boat and certainly saves from drilling holes into the transom. I would recommend this product to anyone wanting to a non-invasive non-destructive method for installing a transducer on their transom.

These stern pads will work with the 3m glue marine backing. No screw holes in your boat. You simply screw the transducer into pad. It won’t come off.

Installed these for myself and my buddy (two boats) a few months ago and we have been using them on the lake so far with no problems. Prefer to use these to eliminate or reduce having to drill holes in the haul.

Worked great on my fiberglass Bayliner to mount my transducer. Glad I went this way.

The 3M pad is very sticky and it’s wayyy better than drilling holes in your transom!

I bought the stern saver for $98.00 and it lasted only one boat ride total garbage . Then I ordered this one and so far it works great for $37.00

Great experience with this company and product! Awesome customer service!