Thermaltake Core P7 Tempered Glass Edition E-ATX Open Frame Panoramic Viewing Tt LCS Certified Gaming Computer Chassis CA-1I2-00F1WN-00,Black

I was looking for an open computer case to turn into a powerful gaming/work box and this case does it all. It is heavy duty, so don't think it's light-weight. I used a VESA mount to mount it on a wall. I had to purchase a wall mount rated for 150 lbs. But it makes working on the computer components much easier. I have always had great results with Thermaltake and intend to purchase more of their products in the future.

This isn’t a case per se, more of a display piece. It is very functional and has quite a bit of good design. I think quality control on some of the threaded holes could be better, but nothing major - the backing plates are necessary for stability so make sure to install them! Plenty of room for cables and wiring... I little roughy getting an EATX board to fit - the board fit fine, cabling to and from the board was a little difficult. This is a great platform for liquid cooling enthusiasts. Take your time... make sure to practice tube bending if you’re using hard tubes! Watch videos and again, take your time! A really fun platform to build!

Next to my 50 inch tv this chassis is about 1 tv and a half wide. Solid chassis, I own a Core P3 and a Core P5 setting this up was a breeze. This thing weighs alot with the glass, requires 2 person to move when completely setup with all the water and hardware.Remove the VESA mount plate to make it lighter if you dont plan to wall mount it.Remove the filter if you are exhausting air out the back.Plan to buy yourself a new PCIE x16 3.0 riser as they are a one time use. Handling it too much causes the ribbon to break. I use an empty toiler roll to make my bends wide, the riser stoped working after I mover the riser into a different slot. I moved it with enough care as disarming a bomb, still broke. Again I own a P3 and P5 so Ive gone through plenty of these risers from all sellers on Amazon. Have not tried the super expensive riser Thermaltake just came out, the one where it was demostrated that it can be twisted around.Good quality/craftsmanship. Out of the box I it is a good baseline for case modding. One could actually daisy chain these together!

This was my first Watercooled PC Build! And I love this case! Open case with watercooling looks and works the best in my opinion. Took me 1 day to build and bend all tubing.Specs:- Asus Crosshair VIII Hero (WiFi)- Amd Ryzen 3950x CPU- Asus Strix 2080ti OC- Asus ROG Thor 850w OLED Display PSU (exchanged Corsair 850x, Asus is highly rated)- Trident Neo 16GB CL16 x 2- EKWB Xres 140 D5 Pumps x 2- VRM/Cpu Monoblock- 2 x 360mm Radiators- 2080ti Full Cover Waterblock- 16mm PTEG Tubing- Samsung 970 EVO Plus M.2 SATA SSD 2TB- Thermaltake P7 Case- EKWB 120mm Vadar RGB Fans x 6- Alienware 3418DW 120hz G-Sync Monitor- Logitech G560 2.1 Speakers- Logitech K70 SE Keyboard

First, this is insanely overpriced. It is the EXACT same as a core P5 with two side radiator mounts and a motherboard tray. I can't see how that justifies nearly $200 extra. That does not affect my review, however. The biggest problem was the poor packaging by Thermaltake. My motherboard tray came bent and scratched, and the tempered glass was chipped. Yes, I could have returned it but, due to my impatience, I decided to keep it. I can't give 1 star then because of that. However, for a $300 case, that truly is minimalist, I expect a higher quality due to everything being exposed.The second problem is the front switch. It is touch activated and very poorly designed. I had to unplug the controls from the motherboard since it seems mine is defective and would turn the computer off right away after it powered on. I really can't see the value of this case. Yes it does look cool and has made liquid cooling a breeze. Cable management is also extremely easy. I do wish you could vertically mount an EATX motherboard to it rather than only horizontal.Keep in mind it is nearly impossible to move by yourself without taking it apart. I would recommend this case for someone who wants to water-cool their system and show off every component. It does let everyone know exactly how much money you have spent! There have been some complaints in other reviews about the PCI extension, I personally have not had any issues with mine.

Missing screws and the 1800 number doesn't work. Instructions are pretty bad too.

The box package it came in was handled "with care" .... I was afraid that damage was done to the parts inside but it was packed nicely inside and nothing was damaged. I'm still putting together my computer but the case itself is already constructed. Be forewarned that if you purchase your pump/rezervuar from anyone other than Thermaltake, you more than likely will need to make some case modifications (drilling holes in the case). Only other gripe I had was that it should have come with a tool for the hex screws. Other than that, it's an amazing case. The materials used, tempered glass and the metal, great quality. I'm more than happy... and one of the biggest pluses to this case is that you have multiple options in almost every aspect of this case. Very customizable, you wont be disappointed!

I heard rumors about Thermaltake's poor quality control and they're proved now.There are several defects on the motherboard tray. I actually don't care most of them but the most annoying one is the bending shown in first image. This bending is less than 90 degrees so that it's causing me trouble while aligning screw holes.I wanted to give a one star but I decide to give two this time because I like its design.