SEZOWS2812B WS2811 LED WiFi Controller, iOS Android App Control DC 5V~24V SP801E for SK6812 WS2815 Digital One-Wire RZ Code LED Driver IC RGB LED Strip LED Matrix Panel Module Light AP/STA Mode

Perfect price point for this led controller, functions as described and very simple to use. Definitely recommend.

Wanted to mess around with driving LED tape from Millumin via Artnet. Took a little trial and error to get it working but does the job great.

Well, I didn't read the description as close as I could have, causing a good bit of head-scratching. Plugged everything together and a couple of LEDs lit - and that was it. No control through the controller or through the Bluetooth app - so I unplugged, rechecked everything, plugged controller in alone - could see it in app. Hook up strip - and that goes away. Recheck polarities - everything's good. Dang.So I get on-line to write a scathing review of this piece of junk controller - read through the description one last time, looking at all the details instead of just the pictures, lol... and saw this.The key line was note #2 - "The voltage of LED strip and power supply must be the same. For example, if the working voltage is 5V, the power supply output must be 5V. otherwise, it may not work."And... the strip is very much a 5V strip. And I was powering it from a 12V power supply.After recovering from a concussive facepalm, I wired in a 12V to 5v converter and plugged in the second strip I had - and everything worked w/o a problem.Lesson learned - Don't try driving a 5v strip with 12V.The first strip? Oh, it's toast. The little LED controller microchips are all dead. Well, kind of an expensive lesson learned, but you can learn from my mistake here. Pay attention to your voltages! I'll use the burnout strip for soldering practice, since I was needing to separate these into about 8 sections each anyway. So - a loss, but not a total one, lol.

The media could not be loaded. Have fun with led signs! Make sure you check out all the options. I like to use the scrolling text and the multiply feature with random pixel or fire. It’s pretty cool

Bought this controller because the description said it works on ws2815. This controller comes with a 3 pin connector while ws2815 has a 4 pin connector. If it does work it is very disappointing it doesn't come with a conversion connector. I'm hesitant to cut off the connector to expose the wires as I won't be able to return. I'm disappointed, but buyer beware.

The media could not be loaded. Im using software Jinx with an hdmi capture device to broadcast videos from rekordbox. Sp801e gets data from jinx and diplays it on this 30x60 led facade that i made total of 1800 pixels using only 2 ports. I wonder if i can control more than the 4096 pixels it claims. Because each port supports 7 universes of 512 channels each 7x512=3584. 1024x3=3072 you do the math.

I got the SEZO WS2812B Bluetooth LED Controller to control a set of LED that did not come with a controller. It took me a bit to figure out which controller would work the best and this one came out as the winner.It allows you three ways to control the lights, App, IR remote control and box button. I prefer to use an app to control most of my RGB. It was pretty simple to set up and connect to the lights and the app set up is easy as well.If you have separate light strips of WS2811, WS2812B, US1903, WS2801, etc., I would recommend the SEZO WS2812B Bluetooth LED Controller.

Unit worked for 10 min and then a brick. No matter what I try to do, the unit remains grayed out and I can’t manipulate it at all. Caveat emptor!

To the best of my knowledge the product looked to me like this:For initialization you need a 2.4 Ghz _only_ wlan (so the app connects to 2.4 Ghz too) without Guest isolation. Better also activate Bluetooth so BlueFi can work.Wlan Configuration worked for me with a cheap ulefon armor x6 (mediatek) smartphone but reliably failed with my S20+ (exynos) from Samsung.The manual is found in the App. An Controller update only works in configured WiFi mode (as the app will not cache it) but it will not change the S20+ incompatibility.After configuring the Network the Controller can use 5 Ghz while the device connects to 2.4 GHz. Jinx! is recommended for artnet. Looks nice but Wireshark revealeded it only sends 0 bytes in the data field.While the rgb color order is configurable you can probably only use artnet for SK6812 as you cannot configure it for RGBW leds so color effect from the app dont work as intended at all.In general the App deals a lot with 2D led fields and offers little variation for a line of leds._If_ you get it running it probably is worth the money.

Sehr guter Controller mit einer sehr umfanreichen App.Man muss sich etwas in die App ein arbeiten, etwas komplizierter als die meisten, jedoch dadurch auch viel mehr Möglichkeiten der Steuerung.Die Verbindung erfolg über WiFi Access Point Mode oder man bindet es in das eigene WiFi Netzwerk mit ein.Gut und Empfehlenswert.