Just Mobile Headstand for Heaphones with Headband (HS-100)

The headset or headphone stand is very sturdy and well made. You can put some heavy headsets on this thing and it will not bend, break, or be over powered like cheaper stands. As the base is just the right weight and the band holder is quiet strong. Upon putting the stand together I even applied a bit more force than a headset/phones would put on the stand to not even see it bend.Just Mobile did right by the cable management on the base, it's just awesome. You can run quiet a bit of cord through this and still have room. More so if you are not feeding a larger cable through it. However, on one of my PC headsets I have both a USB sized cable & a smaller micro usb cable wrapped around this thing, with a few extra bits of space. Another grand thing for cable management is the fact the band holders frame is split into two. On my second Just Mobile stand, it allowed me to sit one of my headsets sound card/controller, on the stands base while feeding the cable through the split frame. Allowing me to not have that awkward controller past stand or before stand bit. As it is just seamlessly right on the stand, to not have any tug or knocking the stand over.

The HeadStand is a simple product with a simple purpose: keeping your headphones tidy and at the ready, while at the same time showcasing them with class. The quality is top notch, with precise aluminum parts that especially complement Apple products. The stand feels very solid once assembled, and the bottom rubber pad keeps it from sliding around or scratching surfaces. There's not much else to say--it's basically a glorified hook. But it's certainly one of the better-looking headphone stands available, and it isn't even the most expensive one out there.One minor thing to keep in mind is that if your headphones use a coiled cable, you won't be able to wrap it around the base. The spacing between the plates is just 5/16", so only straight cords will fit. However, the hook is large enough that coiled cables can be hung over it alongside the headphones. I use my stand with a pair of  Sony MDR-V6s  which have a coiled cable, and the setup looks fine.

Very nice, high quality stand. The black anodized finish looks great and the wire spooling section underneath is extremely useful for long headphone cables. The height is perfect for my 558s with about on inch of headband extension. I don't see how this wouldn't fit most headphones unless you keep your headband fully extended and have a long nonflexible cable stem extending from the bottom of the headphones.Only con is the price. This is twice as expensive as many other equivalent headphone stands. However, most others are either flimsy acrylic or are too tall for my tastes. And I haven't seen any other metal stands with a dedicated space to spool your cable.

I have to admit that I was skeptical when picking out this headphone stand as I was worried that it would be flimsy/cheap. The main reason that I picked this over the other was the simple and modern look that this stand has to offer. The color and texture looked like it would compliment the rest of my PC build very well.Assembly was simple, the base attatches to the two poles via two screws, voila your ready to go. I placed it on my desk and I was actually impressed. The base is wide enough to where it doesnt fall over if nudged. It also has a rubber grip under the base to keep it firmly in place.Only con I would say for me is that there is no cable management. It could also be a bit taller, perhaps an inch or so. Its not a deal breaker for me but would be nice.

This is a super nice headstand that is high quality. The finish on it is like my MacBook Pro. What really sold me was the cable wrap at the bottom of the stand. I cannot find another stand that has this feature.Only 4 stars because the actual part that holds my h/k nc is square and leaves imprints in the leather headband. It's was solved by adding cushioning, but it takes away from the stands presentation. The holder should be rounded like Woo audio stands to avoid this issue.Other than that, very satisfied with purchase.Super fast shipping through amazon as always. Received my product in like 3 business days from the US to Canada.

I recently purchased this stand for use at work to put some Sennheiser HD 598s on and it works great. Contrary to some reviewer comments it is not too short. The 598s are a normal full size headphone and it holds them just fine. It is a nice clean design and fits in well with my decor at my desk. I've included a photo in the product images of it with my 598s sitting on the stand.

Depending on the aesthetic you're looking for, this might just be the thing. It's decently built with no obvious defects/blemishes, and looks... understated and purposeful, not at all ostentatious. No bling factor here, instead a bit of a retro touch. A perfect match for my AKG K702s, to the degree that 1) first my boyfriend didn't notice it was even on my desk, 2) then he asked if it had come with the headphones.The cord tidy in the base works, but would be improved by a larger core to wrap the cord around, at the expense of some capacity. The base could stand to be a bit heavier, as well.I can't comment on the price, except to say that I am not at all disappointed in what I got for my money.

For me this is quite an expensive headphone stand, even if it is made of metal as there are quite a lot of other headphones stands out there that are cheaper. However I don't think any look as good as this, the black metal finish really fits into a clean and elegant work station. The build quality is pretty good, although had a little movement in the main stem of the stand but extra tightening the screws sort of solved this. The only niggle I have is they are causing indentations on my Razer Tiamat 7.1 headband, which isn't the biggest issue in the world and to be far this is more a niggle with the headset for using pockets of padding instead of one piece of padding. But overall I recommend this to anyone who wants a elegant, classy, neat and well built headphone stand.

at a price. But it is excellent and more or less the came price I paid for it back in - 2016? Amazon will show.I love quality. Except it's got to work, and this Just Mobile HeadStand - Desktop Headphone Stand in Aluminium continues looking great.Recommended (if you can afford it).

If you have any Audiophile Headphone they may not do the job! Hifiman Sundara's etc to short needs to be taller!Value for money NOT! worth about £20.00 . No luxury item here. Finish and construction passable.If you have regular headphones and have the money still don't bother......

solid construction designer look and well finished will last forever if looked after also the space on the bottom is great for tiding your cables I use steelseries arctis pro headsets and I have 2 of the stands one at each side of my desk to hold them

Very sturdy and high quality headphone stand. Looks very stylish, I like the brushed aluminium material. Slightly expensive for what it is (hence 4 stars), but overall very satisfied. You might as well invest in a decent stand if you're spending £70+ on a pair of PC headphones like I did