H**L
has known issues, yet can be worked around
dead motor pwm output on #4, changed the wire and resoldered it 3 times and repinned the 4 in 1 ESC connector and still nothing. Any other channel plugged into #4's pin slot on the ESC works fine. I took off a couple stars for this, I guess it's a known issue with the femto and #4 not working right with dshot. I run dshot600. The fix: I reassigned motor 4 to the LED strip instead, now it works just fine.
L**A
Not 20x20 but 16x16 flight controller
I was expecting 20x20 but it's a 16x16!! If you ever wanted to have a dustx58 you'll know that you can only use the taranis x9d. Not anymore! If you're good at soldering tiny wires then this board will work! You provide micro receiver of your choice( I have the turnigy evolution) and there you go!! No more proprietary frysky board!! Bonus is I don't have to own the taranis which is 3x more than my turnigubevokuton. Enjoy!!
E**E
dead on arrival
Second purchase of this board and problems again. This board is oriented incorrectly for the babyhawk, however its fixable with doing a motor remap, what isn't fixable is a dead board, when plugged in the battery there was nothing, no lights or any sounds from the flight controller.
D**P
Excellent Babyhawk replacement board
absolutely great product was a great drop in replacement for my babyhawk. with it came with better instructions for firmware setup but i eventually figured it out and it flies great. Very Solid.
R**H
Just by the new one!!
Product was dead on arrival. The board was shorted out causing me to burn my finger while trying to flash the FC. Will return
M**A
Very impressed
Makes building micros super easy. Used it for my Ft Gremlin. Crazy good preformance and super tiny.
I**T
Great for Micros
Used it on the Swirlie, great FC for micro quads
M**L
Breaks easily
Very fragile one small crash and for some reason one of the signal pins is shorting with the ground. Would not recommend.
Trustpilot
5 days ago
1 month ago
