TEAMGROUP T-Force Vulcan Z 1TB SLC Cache 3D NAND TLC 2.5 Inch SATA III Internal Solid State Drive SSD, PC Upgrade (Read/Write Speed up to 550/500 MB/s) T253TZ001T0C101

The TEAMGROUP T-FORCE Vulcan Z 240GB SSD is a fantastic budget solid state drive! The speeds of up to 520/450 MB/s read/write are very impressive for this price point. The SLC Cache technology ensures consistent performance. Installation in my laptop was super easy. Boot times and application load speeds improved dramatically compared to the old HDD. The 2.5-inch SATA III form factor is compatible with most systems. Excellent value for money!

Very standard ssd and works as it should very fast... that being said at todays prices... I don't think its worth it but that's your choice.

One of the cheapest 1TB Sata SSD I have found. I honestly purchased this model because money has been a little tight. My PC Only had 500GB of memory and it quickly filled up for games and programs. I bought this to make it so I wouldnt have to constantly remove programs and games just to install another one. Small, light, fits in the standard SSD bracket. NotE: This does NOT come with Sata Power connector nor the Sata Data Cable. Most people should have the Sata Power cable in the box with their PC extras (But always check before assuming). The Sata Data Cable you may need to purchase separately (but very cheap) It was a simple process. Attach to bracket, slide bracket into rack that is in your PC Tower, and plug Power Supply to it, then plug the data cable to it and into the mother board. Done. Very non-invasive install. Was formatted in seconds once the PC was restarted (just using windows). Have had no issues with it, installed larger games at basically the same speed as my NVME SSD (I know its a 'little slower' but to me there was no discernable difference, still 50billion times better than an old school HDD). This does have SATA III compatibility (best data transfer rate in a cabled SSD currently. At this price you really can't beat it. Hopefully it keeps up for over a year or 2 and I'll be happy. Keep In Mind: It is BLANK. If you are replacing the ONLY harddrive you have with this one, you will need to know how to install the OS (probably via a USB boot). In my case, I was simply adding it on top of existing memory storage, so it was super easy. Went from 500GB to 1.5TB in 15 minutes. If you are replacing the only harddrive in your computer, it will take extra steps so your computer will actually have an operating system and work. Be sure to make those preparations. Please, Be sure to look up how to properly install an SSD before attempting. Not because its not easy, but if you have never done it you need to research a little so you do not damage your PC, but promise, its not much at all. Just don't blame the seller if you didn't bother to get the info before the install.

Used it for a few days. Works well but you are getting what you paid for. That means it is not top of the line SSD. There are faster products out there but also more expensive. Sequential read and write tests are nice but not really representative of real world performance. I've read a review of this SSD before purchasing and the review basically stated that it is an average product compared to others but the price is also "average" compared to others. The reviewer confirmed the top sequential speeds that are advertised and my own benchmark software shows that too. What struck me in the review was something I have not really thought about previously when approaching SSD performance. While pure (100%) reads and pure writes are fast. Once you have a mix of read & write requests, that is where an average SSD is separated from a top one. Even at 99% read and 1% write the performance starts to degrade and it is the lowest at 50% read/write. I have a Samsung 850 Pro 256gb SATA, Samsung 850 EVO 500gb SATA, Samsung 970 Pro 512gb NVMe and now this Vulcan Z 1tb. For all these drives I took a 21GB file and copied it within the same directory on my PC. The exception being 850 EVO which was tested on an 8 year old laptop which can lead to lower performance. This simulates a 50% read/write scenario where the drive reads data and then writes it back to itself until the file is copied (cloned essentially). In between the tests I have restarted Windows because otherwise the next test would have read the file from RAM (cached by windows on first test) instead of the disk. The results below are what I call a "stable" transfer. Initially the transfer will be faster, then as internal SSD caches are filled the transfer will stabilize at a lower value. Samsung 970 Pro (NVMe) stabilized at 700MB/sec. Samsung 850 Pro (SATA) stabilized at 200MB/sec. The file took 1min30sec to copy (windows copy window disappeared). Samsung 850 EVO (SATA) stabilized at ~180MB/sec. The file took 1min40sec to copy. Vulcan Z (SATA) was jumping between 60-90MB/sec, no stable transfer. The file took 3min30sec to copy. All drives, with exception of NVMe where I did not pay attention to this, took up to an additional 1 minute (drive still registered writes) to move over cached remainder of the file which was not done at full drive speed, not sure why. For an OS drive I recommend the Samsung Pro (gaming pc) or Samsung EVO (laptop). Not sure if I would want a Vulcan Z as my OS drive and I'm not using it as such. There appears to be no temperature sensor on the Vulcan Z as 33C is constantly being reported even by the TeamGroup SMART Tool. My other SSDs vary in temperature over time but Volcan Z never does, not once, even when testing or after a cold boot. It doesn't bother me but that is a fact. Finally, the serial number written on the drive (correct one) and reported by software is different. Again not a big deal but would make it easier to check warranty without accessing the physical drive.

Worked amazing! Fast, durable, and easy to install!

Oops, I just purchased this, but probably shouldn't have. Every single recent review give it one star, and reports fatal early failure. I just installed Windows 11 on it, and it's actually pretty fast and runs fine so far, but it seems TeamGroup manufactured a bad batch of these and decided it was perfectly okay to sell them anyway. It really does perform very well for the price, but I am thinking of returning it. Bottom line: Read the reviews, especially the recent ones.

I recently upgraded my rig with the TEAMGROUP T-FORCE VULCAN Z 1TB SATA SSD as my new SSD for my Steam library, and it’s been a great addition overall. This drive offers a budget-friendly boost for gamers looking to ditch slow HDDs, though it comes with a few trade-offs. Quality and Build: The SSD is well-made and understated. Its black casing is sturdy yet lightweight, slipping easily into my 2.5-inch drive bay. It’s got a no-frills design that feels durable enough for constant gaming use, and the 1TB capacity is a perfect fit for my needs. The build inspires confidence without any unnecessary flash. Performance: As my new Steam library SSD, it shines. Games like Baldur’s Gate 3 and GTA V load noticeably faster than on my old HDD—cutscenes and levels kick in quick, shaving off precious seconds. The SATA III speeds (up to 550MB/s read) keep things smooth, and 1TB holds a solid chunk of my collection. It’s a big leap from spinning drives, even if it’s not the fastest tech out there. Value for Money: For the price, this 1TB drive is a bargain. It’s cheaper than many SSDs with similar capacity, making it an awesome value for upgrading a Steam library on a budget. You’re getting reliable performance and plenty of space without the premium cost of NVMe drives—perfect for cost-conscious gamers like me. Pros: • Fast Load Times: Cuts down game loading significantly compared to HDDs. • Great Capacity: 1TB fits a hefty Steam library with room to spare. • Affordable Price: Excellent value for the performance and storage offered. Cons: • SATA Limits: Not as blazing fast as NVMe SSDs—speed caps at SATA III. • No Extras: Lacks mounting hardware or fancy software; it’s bare-bones. • Basic Design: No RGB or standout looks, if that matters to you. Minor Notes: It’s SATA, not NVMe, so don’t expect top-tier speeds—check your setup if you want more. No screws or brackets included, so have those ready for installation. It’s quiet and efficient, but it’s all function over form. Overall: The TEAMGROUP T-FORCE VULCAN Z 1TB SSD is a dependable, wallet-friendly choice that’s now powering my Steam library. The pros—speed, size, and cost—make it a winner, though the cons keep it from perfection. I’m loving the upgrade and would recommend it—5 stars for value and solid gaming performance!

Love it! Well made... Provides needed storage for data files and I love the logo too!

I bought this Team Group SSD 1TB Vulcan Z SA3 TEM to be used on PS3 and it works flawlessly.

Bon produit.

Team group es una buena marca a un precio accesible. El SSD tiene un buen rendimiento, con mi anterior HDD de 5400 rpm Elden Ring tardaba a lo mucho hasta 5 min de carga, con este SSD tarda menos de 1min. Cabe decir que mi HDD ya comenzaba a presentar sectores dañados, pero creo que igual podria servir como referencia a alguien.

Di buona elettronica! Lo utilizzo come SSD secondaria all'interno del mio notebook! Fino ad ora funziona alla grande! Veloce in scrittura e in lettura come nella descrizione tecnica

With storage shortages about and about this sata ssd will do the job and has been relatively inexpensive in comparison to other brands. I would entrust buying this over anything cheaper due to T-Forces customer support is actually responsive in comparison to cheaper alternatives