Kyostar Silicone Intake Hose Elbow Pipe Turbo Inlet Pipe for Audi A3 VW MK7 Golf GTI R EA888 1.8T 2.0T

So far so gooooood, aside from having to trim close to a 1/4" off both sides, fits and works great, can definitely tell there's more airflow as my exhaust has more of a rumble to it, All in all best choice without breaking the bank, or spending an extra $30-$40 for a Name Brand.

As others have stated this hose is too long to be used with any turbo inlet with a defined shoulder, it will have to be trimmed, which isnt too big a deal. Works great with aftermarket inlets without a shoulder. Also another gripe one of the t-bolt clamps was too small so I had to find a larger diameter hose clamp.Other than that it's a good quality hose and fit fine on my MK7.5 GTI with an HG Motorsport inlet.Also a tip - if you find the hose rubs against some parts try twisting it to a different position. That helped me out as I had some issues near the brake fluid reservoir.

This intake hose is exactly what I was looking for. Not many cheaper options for the MQB platform. It'll do the same thing any other intake hose will do. Its 3" and gets the job done. Initially was a bit tight but I didn't even remove the airbox to get it on. Easy install. Not rubbing on any lines or anything. Definitely would recommend this route if you aren't looking to spend 70+ on name brand.

Same quality as every other intake hose for 1/3 of the price. I have a big bore intake elbow and it was a bit hard to get the clamp on, I had to completely loosen the clamp to slide it over the flange, then pinch it closed while tightening the screw to get it to thread.

Received the arm covered in small white fibers/hairs, more than likely from when the pipes are cut where they are made. Fibers were inside and out all over the place, almost looked like mold at first glance.Had to wash the whole hose down with dish soap in and out to remove all the fibers. Other than that it arrived as pictured.