Enermax ELC-NC200RGB NEOChanger RGB LED Reservoir and Pump Combo, 400 ml (Pack of 1)

I was skeptical buying this for my first custom cooling loop. I had worries the pump included would not be up to par. I was wrong though. It's powerful, moves a lot of water quickly. Best if all is that it's virtually silent. The remote makes it pretty sweet but I'd like to see some kind of software implementation to control pump speed. The reservoir itself is a great design. The tube coming down into it reduces splashing and rebounding water which means better flow in the system. The display in front for the pump rpm is also a nice unexpected addition. To those curious this also comes with a atx power bridge to test out your system before powering everything on. Will be recommending to everyone. Also to avoid a bunch of tiny bubbles on the inside wall of the reservoir use highly filtered expensive only. I used home filtered water to test first so I have clinging bubbles in my picture.

See Update - *Original* Works very well so far and was easy to setup. The LED is not so great though (dim and not accurate color matching), so if thats important you may want to look elsewhere.The remote can be fiddly, but it does work and the magnetic feet on it is genius.UPDATE: Pump developed leak in base at about two months and fried itself. I was very fortunate that I had this installed vertically in front of components. I set up an RMA with Enermax, boxed it up, paid for shipping and sent off. Two months later, no contact. Sent support email....no response. Attempted to call....no answer. Total loss on the pump and the return shipping. I will never purchase Enermax again. I will also watch for any company that uses Lepatek for support....very shady and untrustworthy.

Works great so far. The RGBs work perfectly with my Aura Sync. The only problem is that they aren't UV lights (I'm using UV coolant and have 3 UV cathodes in my case) But that's not a bad mark against the company or product, just a personal disappointment. I love that you can change the RPM of the pump with the remote, however, the RPMs do not go up in the increments listed on the remotes button (It's not a 'problem' but I have to mention it) So if I press 150+ it will go up by like 200, press it again and it goes up by 120, press it again and it goes up by 300. All in all, I love this product and I hope it lasts much much longer than the previous model I got(from a different company) that died on me.

started using this pump at the end of december. everything was good up until last night. I was reading a lot of people are having issues with the glass cracking or the pump leaking, and sure enough, 4 months down the road. the reservoir has multiple cracks forming, and it started to leak last night while i was gaming. the pump works great, speed is good and flow is great. lights are great as well. But to have something leak while I'm playing games is definitely a no go. luckily i placed the pump away from all electrical components.

Great product for the price. Getting comparable parts from most other vendors would cost you almost double. This pump isn't a standard asatek d5 pump, but a custom design that has a higher head pressure than the d5 pump with a little less flow rate. So having a large loop with multiple blocks is well within the capabilities of the pump. The pump is quite and mine reads at 4600 rpm at max speed. Mine has a faulty LED on the ring and 1 of the leds doesn't appear to have a functioning blue color. So when I set it to blue it justhas a dark spot. Any of the purple colors end up with a red spot and white has a yellow spot. I didn't realize until I had the pump running for a while what the actual cause was. I haven't tried to RMA it yet. Mounting is ok if you have a huge flat area to mount it to. None of the screw holes on the pump/res match up entirely with any mounting areas in my case (Phanteks Entho Evolv TG). None of the brackets the come with it mount to a radiator which i think is something they should look into. It gives you a lot more flexibility in mounting than the brackets they supply to mount it horizontally. I would have given it 4 stars if it wasn't for the faulty LED. For the price its a great way to get into water cooling for lets call it less instead of cheap. Some people did mention the main outlet seems to just be a little cheap. The shroud is plastic so I would just recommend not to over tighten any fitting you put there.

wow. I am shocked to see that this product only end up with average review here.I have this install for my client custom pc build. I installed RGB Ram, RGB motherboard, RGB lighting around his case. So why not RGB reservoir?The GOOD: The RGB light look great. if you want to highlight this reservoir as the center of the case, this is the one to get. It comes with a remote control that allow you to change the speed of the pump and color of the RGB. It was easy to use. The built quality was robust and very durable (I have it running for 6 months no issue at all, according to some others experience on this product, I might get lucky) The adjustable speed make it perfect for different PC case if want the best balance between noise and performance. The RGB come with different light effect.THE BAD: Well , it looks plastic. The whole thing is made of plastic. For appearance, it looks fine, but not the best when compare to EK ,Bitpower.or any name brand out there. Unlike other reservoir or pump, there are different inlet or outlet config. The inlet and outlet are fixed on this product. inlet on the top of the reservoir and outlet is at the back of the pump. You are stuck with it. it does not offer too much options on inlet or outlet config. The pump can get noisy when you crank it up. Once you turn the pump up the noise can get really annoyingBut getting only 3 stars is a little low for what I got from product. To be fair, for 100 plus USD. You get a pump with speed adjustment, a reservoir with RGB lighting,what else can you ask for. If you buy it separate, I am sure it will cost more. I think this is a fine product. if 100 is full score, I will give it a 80 to 85. It is not perfect but what product is?

llego en tiempo y estado perfectofunciona sin problemas, altamente recomendado

This thing is pimp. Yes its aluminum lid booo, but there are ways around that. Teflon tape the threads and get a piece of rubber with one side adhesive and fit it to the bottom of the lid. Boom problem solved. Been running it for 1 1/2 months non stop at 3150rpm not one issue. Oh and i just figured this out dont plug in the led 4 pin micro connector to your motherboard unless you have sync it will dim the led or if you notice the led is weak that is your issue and that is how to fix it. Unplug it and the colors are deep took me 5 weeks to figure that out after I removed all the parts from my pc to do an inspection. Run the pump at 3500 max. I noticed when I hooked it up it was going 5500 rpm till I slowed it down. So this thing has power. No leaks. I think that happens because people try to remove the cylinder, but its all fixed just the lid can be removed. Item does not come with hoses or fittings just caps.

Llegó rota...

Originaly bought 2 400ml. 1 started leaking from the bottom at the remote control sensor 15min into leak testing. Bought 2 more to replace that 1 and have a spare as I didn't want to have to change my piping. Then the other original ones LEDs went for crap. Ended up just throwing all 4 away and changed everything to Thermaltake

Very nice pump and res, adjustment of the pump power is great. Like the RGB LEDs gives the pump a oomph feeling.