🔩 Elevate Your Plumbing Game!
The Valterra T1005 3" Slip Hub Flange is a high-quality flanged valve fitting designed for universal compatibility. With an inner diameter of 3.500" and an outer diameter of 3.950", this durable component ensures a seamless fit and reliable performance in your plumbing system.
B**N
Fixed my dumb mistake
THis was a perfect replacment for the flange that came with my valterra valve I just bought. Unfortunately I cemented the connections together before install and so I had to get a new flange since I did it slightly wrong. Not cheap but cheaper than a whole new valve assembly!
S**Y
Worked for me.
I used this as a flange for a vent tube on a media blasting cabinet. It did the job just fine.
A**R
Sturdy
I used this to reinforce a hole in the drywall ceiling of my garage. It worked great as a port to pass through an air compressor hose and will keep the hose from eventually enlarging the hole when the hose flexes. It was not the intended purpose of the fitting but it worked great.
M**L
Works great!
I used 2 of these to keep my wife’s Pilates Reformer from sliding on the wood floor. Perfect!
J**Y
Not a pass thru hub
The only thing I can say is this is not a 2 inch through hub. A 2 inch pipe will butt up against a flange in the hub preventing the pipe from passing straight through.
A**R
Fits great
Easy install and fits perfectly
G**H
Perfect for my speaker stands.
Not a typical use, but these were perfect for mounting my speaker stand uprights to the base and plinth. Great gloss finish too. 👍
H**D
A quality flange. Needs slotted mounting holes though
This worked for us. It's basically a female fitting. Your pipe fits INTO this mounting flange. I just wish the holes at the corners for your mounting bolts had been slotted. They didn't line up perfectly with my existing ones. Took a little fanagaling, but finally got it bolted up
K**H
GOOD ITEM
DID WHAT I NEEDED
D**T
It’s a rv grey water valve flange
They are all the same size, adapts to standard 1.5” pipe. I had to grind off old bolt which wrecked the old one. Exactly what I need to complet valve replacement.What I learned through all of this is I would have been better off buying grey black water combo and adapting piping to both. Less hassle because the seals were gone in both. Lesson learned.
M**K
As promised
Works just dandy
A**R
Perfect replacement
The original hub on the drain on my Roadtrek cracked around the mounting bolts and was permitting a leak. This replacement hub fit as designed. The difficulty is that with a fixed system, there is no flexibility and required adjustments upstream to make it fit.
B**3
It needs to be clearer to the purchaser the purpose of this flange
There was nothing wrong with the device only that it looked like a spigot flange which was what we really needed. Purchase was a waste.
Trustpilot
2 days ago
5 days ago