Motion Pro 08-0519 BeadPro Tire Bead Breaker and Lever Tool Set

Well made and great design, saved my butt! I was approx 100 miles from camp and punctured my dirt bike tire, works well for tubed dirt bike tires, compact and light, will likely not work well for tires with a stiff sidewall

Stop reading and just buy them. They do exactly what they are advertised to do. The construction of these tools looks to have had a lot of thought put into it. They are strong and light. I put a tremendous amount of force on them while dismounting my VStroms rear tire and at no time did I feel at risk from them slipping or breaking. The inner bead area on the tire wasn't so much as scratched and as the headline says, this was my first time ever working on my bike. They were plenty long to get the leverage I needed to do the job, but not so long as to get in the way. Also the compact size of these will make it easy to store them on my bike for roadside emergencies. I was really impressed how well the bead break function worked. I wrapped the spoon end with a rag to protect my hands and began working the tool. I chose spots about 4" apart on my rim and just continued to press a little, spot by spot, with a little Windex for lubes, until 1/3 of the way around the bead started slipping down in to the tire. Flipped the tire over and repeated the process. The spoon part did well on gripping the bead and this is where a longer tool might have been an issue. I was able to get the end of tool lower than the bead because the tool was short enough to miss the hub. I also strongly recommend the Motion Pro rim protectors. I used them as a part of this process and had I not, my powder coated mags would have chewed up pretty bed.

These are expensive but well worth the money. These are lightweight aluminum alloy and very sturdy. Simple looking yet very effective. Tight bead on my set of waypoint tires were no match for this tool.

Fantastic product works as advertised the bead breaker feature is fantastic, took the work out of dismounting tires. High quality machining and a nice finish to boot. Definite 10/10 product, light enough to go in my gear bag as well. 1st tire change that I didn’t mar up my rims, wish I’d have heard about it years ago.

These are my first tire spoons. I have never tried to remove or install tires before. Bought these for the bead breaking feature, which worked flawlessly. Hindsight being 20/20, I would have gotten longer tire spoons. Just for reference, I was attempting to remove my 2009 Sportster's front tires (Metzler 880). Removing the tire from the wheel was easy enough. Installing on the other hand was not. Once you get to the last 1/4 of the tire installation, you run into the weak point of the spoons. They are just too short to get any leverage. I had to get my girlfriend's help to complete the job. Side note. I have heard that Metzlers have one of if not the hardest sidewalls. Making it more difficult to install. Pros: Bead breaker Lightweight Cons: Not long enough (not enough leverage)

I didn't know I needed these until I got them. 100% necessary addition to the toolset. They are forged and very solid for their weight. I've seen the Chinese knockoffs of these and they are cast metal with pitting - not what you want when putting down a lot of leverage. I used these to successfully change my first set of DRZ tires. I then felt inspired and tried these on a set of 31" Toyota tires that I needed to separate from the wheels to recycle. These successfully unseated the bead on those as well and I was able to use my car tire spoons from there. Couldn't be more impressed with such a simple tool.

Super light - handy - I carry them on my KTM790 in case something happens

Ok let me start by saying wear gloves lol. These are finger / skin pinching weapons. I used these on my Tenere 700 and I was not getting very far. I grabbed some silicone spray and shot around the bead. The lube helped slide tools in and help bead break. I struggled at first but moving forward I will keep silicone spray in my bags for trail side. Definitely going in my trail tool kit.

..no que no lo sean para la otras pero... "romper el talon" de un neumatico de enduro, por ejemplo, no es lo mismo que lo de una gs800... Me ha consentido, casi siempre, de sacar el neumatico sin recurrir al viejo truco de la pata lateral

Easy to use. Higly recommended!

重量很轻。试过拆装拉力车轮胎，非常好用！昂贵不是它的缺点，是我的缺点。

Work fine on dirt orientated tyres. Not good on large road tyres.

Works great and is definitely strong enough. Great tool to carry along. Light and compact.