LS1 LS6 LSX Oil Pressure Sensor Relocation Kit C5 Corvette

This will make changing the oil sensor for replacement in the future if needed.

Fitting on end for oil pressure switch is not deep enough had to modify to get sensor to seal..needs to be upgraded

The concept and idea are good, but did not fit my OE oil pressure sensor. I had to grind down the length of sensor in order to get the gasket to contact and seal. If there’s another sensor that should have been used, no info was given and no directions supplied.

Needs a 90 degree fitting, to allow the line to be routed under all the vacume lines , rather than through

Installed this on my 2002 Corvette and this was an AWESOME investment to minimize the work of having to pull the intake manifold to change the Oil Pressure Sensor if it goes out again down the line! One thing to keep in mind though is that you'll want to get some yellow plumber's tape and add it to each of the connections to prevent leaks, but after I put that on at each point this adapter was smooth sailing. From the pics you'll see how the sensor was originally buried at the back of the block and I relocated it to the top using the adapter which will make a sensor replacement take 2 minutes instead of 2 hours. #Genius