Ematic Wall Mount Kit for 30 - 79-Inch TV's with 10 Degree Tilt and 6-Foot HDMI Cable

This is a very basic wall mount for flat panel TVs, but it's well made and I have no worries that the parts will bend/break or that my TV will come off the wall accidentally. The metal is very strong and the design simple enough that very little can go wrong or come loose. It also sits very close to the wall (maybe 1-3" with the tilt), so it looks very clean when installed.The hardware provided is also very strong. I used the lag bolts to mount the wall bracket directly to the wall studs and have no concerns about them coming loose. Also, the screws included with the mounts are very good and attached to the TV very smoothly and securely.The big negative I have is that the two posts that came with mine didn't have the holes in the same place on each, meaning that one of them sits higher on the TV than the other and could make the TV sit at an angle. I had enough wiggle room to push the one up and the other down enough to balance it out, but if it's off too much, it may require hanging the wall bracket at an angle. I was able to avoid this and to put it up fully leveled.Another negative is due to how close it sits to the wall. This means that the screws used to tighten the posts at the bottom are very hard to reach and tighten, particularly with larger TVs. You may want to swap the screws out with bolts so you can use a socket wrench with an extension to tighten them down. This also makes it difficult to tighten the side mounts down as you can't fit your hands behind the TV in most cases; however, the hinges are tight and friction should keep them in place without needing to tighten them. Also, connect any cables to the back BEFORE you hang it as you may not have enough room to get them installed after it's up.My final complain is that the instruction manual is rather light on details and may be difficult to follow for people who need everything spelled out. If you're good with your hands and are mechanically inclined, you should have no problem getting this mounted and working. I was able to go from measuring to hanging a 60" TV in about 2 hours even with complications. I also measure multiple times and work very slowly to make sure it's done right, so I probably took far longer than needed. Regardless, it's up and it's doing a great job.

Bought this to mount a 60" Plasma, which from that standpoint it is working adequately. Mount itself seems to be built of quality material.However, there are some disappointments to be aware of:1) Instructions are terrible; just pictures from an angle that leaves many questions. You'll need to be fairly aware and set it up yourself.2) Included-screws are low-quality. I actually sheared the head off of one while screwing it in by hand.3) Supposed to mount with only 4 included screws, though I recommend adding more to be more secure.4) Mounting bracket only allows proper installation one way, but there is no "up" arrow telling you which direction is correct. I mounted it upside down the first time.5) Very flush against the wall, which would be a plus if it still allowed for space to tighten the TV-attached arms properly once mounted (which it doesn't). Make sure to plug in all your components prior to putting the TV up on the mount.This mount was low price, but you may have many issues to deal with such as I did. Now that it's up it's fine, but the mounting process was unintuitive and difficult. I'd probably recommend to a friend whom I could help instruct, but Ematic should include better hardware and instructions for general users. [Did come with an HDMI cable I haven't used yet.]

Just as good as higher priced wall mounts. the level that comes with the mount is worthless and I suggest using a real level, and be prepared for some trial and error if you was to tilt the TV down, but not all the way which is a pretty good angle. Each side adjusts individually so you can have different angles on each size, throwing the TV's level off. I guess perhaps other mounts are the same way, but this one gave me some fits getting both sides even. I used a different mount for a 60"LCD and didnt have any troubles with fine adjustment of the tilt.

This was a very inexpensive bracket, which seemed to be loaded with reviews by people that are not mechanically inclined. The pictograms in the directions are indeed not very helpful, but if you simply understand the attachment to the TV, and how the brackets hang from the wall plate, it isn't that hard to figure out. The bracket comes with a wide assortment of mounting bolts and screws, and should attach to virtually any 30 inch - 60 inch TV. The pivot adjustments seem a little weak, but again, being smatter than the bracket, I simply installed a brace between the backside of the lower edge of my TV and the wall, made out of the Styrofoam packing material for my TV that I simply snapped off to length. It keeps my TV at the angle I prefer, and isn't visible. I would definitely buy this product again, and feel sorry for the other users that cannot figure things out on their own.

We used this mount for our bedroom tv. The installer we used stated it was a decent mount, and for the price, we are happy with that! We do not move our tv, and mounted so we could use the full surface of our dresser. Love the extra space, and very happy about the price!

Nice product with an awesome price. It was easy to setup and the instructions are fairly easy to follow, includes all hardware needed including anchors for concrete walls. My only complaint is that setting and holding the desired tilt angle is a little difficult. Nonetheless, it was VERY affordable!

This thing is awesome! If you have a older flat screen like me the width of the mounting brackets is 26" and the first wall mount I put up was 22" wide. This is 30" wide.The only complaints I have would be don't use the leveling bubble that comes on the mount and the lag bolts are a size smaller than the other wall mounts I've used before

Took forever to mount the thing on the wall.... Had to put more wood behind the sheet rock.... Not the hangers fault... Builder was too cheep to place bracing in the area of the TV hanging on the wall. Would buy again!