Upgraded Set of 4 Rollers Kit Replacement for Total Gym Wheels/Rollers, Fit for Total Gym Models: 2000, 3000, some 3000 XL, and a few very early XL, 15 Year Warranty

Purchased these for my wife’s exercise table, they were quite a bit cheaper than the one from the maker and fit and work just as they should.

Fit my Total Gym 2000 perfectly. Easy to install. Smooth action.

I received the replacement wheels very quickly, they did install on my old Total Gym (circa 1998) OK, and the operation seems very smooth and the fact that they are made of Delrin instead of plastic or nylon (like the originals) gives me reassurance that they will definitely last a very long time.However, I'm giving this product a 4-star review as twice in the product's description and diagrams, it states that the wheels are 1 1/4" (1.25") in diameter, but when I received them I noticed immediately that they were larger than the original wheels. I took out my digital calipers and sure enough, they are 1 3/8" (1.375") in diameter.Although they do seem to fit and operate OK, and the bearing hole was indeed 1/4" (0.25") as indicated in the diagrams (fitting the axles properly), I will continue to use them on my Total Gym. I was going to take a photograph of them measured in the calipers, but didn't before I installed them and since they fit and operate OK (so far) I'm not taking them back off. But, this may be something that needs to be addressed in the seller's images and description of the product, as it is NOT accurate for what I received.If the seller reads this review and realizes that perhaps they sent me the wrong product (the bag I received was labeled with a sticker that read "X003AYC0KR Nex Jy Upgraded Set of 4 Rollers... Very Early XL, 15 Year Warranty made in China"), I'll happily remove the ones I received, replace them with the correct 1 1/4" (1.25") diameter wheels and send these back (along with correcting this review), but I have a feeling that won't likely happen.If your Total Gym model absolutely needs 1.25" wheels and 1.375" wheels won't work, beware, as the product diameter as indicated throughout this product's descriptions and diagrams (1.25") is NOT the size you will receive (1.375")!

Fast track works like new.

The dimensions are not as described

Exactly what i needed.

These appear to be well made and arrived quick but they don't work for my pilates reformer which is why I ordered them. Unfortunately they came in while I was on maternity leave & I didn't find out they didn't work until after the return window. I can't really blame them as I should have done more homework to make sure they were right. However these where the only ones I could find that matched my search & they looked the same. So I guess leaving a middle of the ground review since I can't vouch for them & in case anyone else ends up here also looking for ones for their pilates machine.

Perfect fit for my Total Gym. These rollers were easy to replace, roll smoothly and quietly and were very reasonably priced. Shipping was fast. I am very pleased.

I received the product and put them on and couldn't believe the difference, super quiet and smooth. I havegot 3 different sets of wheels from Total Gym ( my machine is over 20 years) and nothing compares to these. Thank You Amason!

So they will not fit any bolt, or axle that is not 6mm. I purchased these wheels for my mid 90's Total Gym that has 0.25 inch diameter bolt axles. Needless to say, they did not fit. But they look, and feel to be nicely manufactured wheels, so I reduced the diameters of my 0.25 inch bolt/axles down to 6mm to suit the new wheels.The method I used to reduce the bolts diameter was using one of my electric drills as a lathe, to hold each bolt, one at a time, in the drill's chuck, and holding the drill body securely in a vise, and using a "flat smooth" file to reduce their diameter while the bolts were spinning. Had to remove about 0.020" from the bolt's diameters to fit these wheels.And so far, after a couple of weeks use, the wheels are performing very well. Smooth, and easy rolling so far.

The wheels did not fit my total gym, I don’t know what model I have it’s not in the book or any where. I had to buy smaller than 1/4 x 4.5” bolts to make them fit. They work great after that.