The CATx Dual Computer Access Modules (CAMs) are highly compact devices that allow you to share a single computer between two sets of peripheral devices. In simple terms the CAM can be viewed as a combined video splitter and peripheral hub. This is useful for mixing local and remote stations or mixing KVM with extension or signage systems. The module connects to the video, USB, audio and RS232 ports of your computer and then connects via CAT 5, 5e or 6 cabling to the ADDER View CATx KVM switches and/or ADDER extender receivers (either ADDER Link X100 or X200), each of which can be located up to 300 meters from the module. Your video display, keyboard, mice and speakers are linked to the remote devices. The CATX-USB-DA variant is not fitted with audio or serial ports but is otherwise identical to the model. Features: Resolutions and cable lengths - the maximum resolutions achievable are: - 1920 x 1200 @ 60Hz at 100m. - 1600 x 1200 @ 60Hz at 200m. - 1280 x 1024 @ 60Hz at 300m. Audio: Two channel CD quality audio is supported. Absolute mouse mode support: Supports absolute mouse mode when used in conjunction with supporting equipment. EDID display information: The module contains a default set of EDID information that supports display resolutions up to 1920 x 1200 @ 60Hz. In addition, the module will check during power up whether alternative EDID information is available from the KVM switch or extender that is connected to port A. If required, you can also harvest and store new EDID information from your display (Read and Store). Power: The CATx Dual CAM uses a USB port to derive its power from the host computer, dispensing with the need for a separate power supply and thus simplifying installation. Therefore the USB cable must always be connected to a USB port on the computer that is capable of providing up to 300mA. User arbitration: Control of the host computer is arbitrated by the module on a first come, first served basis. At the moment that a key is pressed or
Trustpilot
2 months ago
1 month ago
