DiabloGeneral Purpose Beam Saw Blade for Wood - 12" Diameter, 40 ATB Teeth, 5/8" Arbor, .087" Kerf, 18° Hook Angle, .063" Plate, 7000 Max RPM - D1040W

Diablo blades are my go to blades for my company, they hold up great and are extremely sharp and accurate

Every tool has a specific purpose, this one is designed with a Super Thin Laser Kerf, 0.063" (1/16") and a plate of 0.039" (hair over 1/32"). The benefit of that feature is material conservation. And the trade off is that you cannot drive it through hardwood. If that is your need and purpose, then you'll need to use a 0.125" (1/8") kerf blade. I use this on a 10" Kobalt KT1015 Table Saw, it works great when ripping and cross cutting. If you try to adjust mid-cut, you will likely get blade deflection, but that might be more an indication of poor setup (needing to correct mid-cut). Another benefit to a thin kerf is that it puts less load on your saw (a 1/8" kerf is double the width of this 1/16" kerf, and is removing twice as much material). If you find this blade deflecting under load, then you could reduce your feed speed. If the blade wobbles without a load, might need to check the setup (perhaps debris on the hold down plate or nut). Mine will spin under no load without wobble.

Good blade on table saw when you need the extra depth of cut. works just as good on my Makita 10-1/4 circular saw.

THIS PROBABLY A VERY GOOD BLADE.BUT IT WILL NOT WORK ON MY10" SAW.IAM KEPING IT TO USE ON THE TABLE SAW.

The Diablo blades are great.

It isn’t easy to find the saw blade that fits the Big Foot power saw. Very happy to find it thru Amazon.

I get it. Feud / Diablo uses the red color as a trade mark but be ready for a lot of your cuts to now have red burned into the cut end of the wood. Would be much better with a plain silver, low key branding and not a giant red spinning crayon.

Freud makes some of the best blades around I bought these because I have used this brand before in similar circumstances. The thin kerf cuts thru metal like a dream so I thought I would try it out on some 3 “ insulated aluminum panels. Did not disappoint

Me gusto cumplió con mis expectativas

スキルソーの刃の交換の為購入しました。前回楽天より購入したのですが、値上がりしていたのでお試しに買ってみました。ちゃんと調べたんですが、中々見つからなくてインチ数が10.5とゆうのが見つかったので0.5インチ位良いかと思って入荷して早速取り付けたら擦り割りの刃の取り付け金具にぶつかって、はまりませんでしたので外して使っています。切に関しては、相変わらず最高です。

Love the extremely thin kerf!

Este producto ha salido de buena calidad. Hemos pedido más.

Es un muy buen producto,100% recomendable