FDW 39.4" Lift Top Coffee Table with Hidden Compartment and Storage Shelf Wooden Lift Tabletop for Home Living Room Reception Room Office (Black)

Love this coffee table. It was OK to put together. I love that the top lifts up so you can use it as a desk or to dine on. Storage space inbetween table top. It is very sturdy. Good deal for price. Bought it for a travel assignment and brought it back home to keep.

For the money, this is a knockout product. It's fairly sturdy, it looks nice, and the functionality is great! My roommate and I have been looking for a coffee table for a while and we are definitely satisfied with our choice! One issue I have with this is that building it was a huge hassle. The directions were not very clear, and the figures were very small regarding the pieces and how the screws were intended to fit together. Also, it isn't technically required to use a power tool to build this but if you don't have a drill, be prepared to get a SERIOUS arm/forearm workout as you will be screwing screws into the wood. The holes are started for you but they are not pre-cut, you will have to drive the screws into un-penetrated wood. Also, the angles at which you need to do this are a but ridiculous. It's possible but VERY BLOODY DIFFICULT. Also, the tool that they provide for this is almost a joke. Like a serious "HAHAHAHA" joke. You would need hurculean strength to construct this coffee table using that little thing. Word to the wise, use a drill, even if it is a cheap one, it will be super helpful. Other than that, this product is a solid "bang-for-your-buck" purchase.

Summary: This is a do-it-yourself assembled table having clear instructions, with all pieces & hardware packages numbered. It was packaged well, with table pieces having no dings, scratches, or dents, as the cosmetic sides face inward in the carton to protect from any damage on the carton. Table pieces are well-made, all fastening hardware supplied, and Allen-wrench with Phillips-head screwdriver at one end is included. You will want to use a powered screwdriver to make the assembly go faster & be easier on your wrists. The finished table looks nice & lid raises & lowers nicely, staying secure in the raised position regardless of weight on it until you push the lid forward to lower it. Cosmetic quality is A-. Overall fit of pieces after assembly: B+. I am pleased with the purchase. -Detail- Materials: Table is made of white subtle wood-grain laminate over composite wood. Supplied Hardware: Pre-packaged screws, screws with capture-posts, capture-clamps, lid bumpers, leg floor-slides, and the two pneumatic assemblies was supplied & satisfactory. My packet of wood screws for the lid-raising pneumatic assembly was missing 2 screws out of 16 needed; it is a minor issue as 7 screws appears to be sufficient per side, though may add my own. Round wood-grained stickers are also supplied to cover the exposed nickel-sized hex-head and capture-clamp screw-heads, but those heads are only visible inside the compartment when the lid is raised or when looking under the table. Pre-made construction: The applied laminate was well done, though at one end of the lid and inside the compartment's bottom there is a slight glue excess along one edge, barely visible. All holes have been fully pre-drilled except for the lid-securing holes, which has pre-drilled starter holes. Do-it-yourself assembly: All table parts are numbered, and picture assembly guide is very good. -Allow 30 minutes for unpacking, separating & organizing the several numbered hardware packages, & for placing the table pieces aside on a carpeted floor/area where you can see the piece numbers (stickers). -If you have a powered screwdriver, this will take about 1 hour and 10 minutes to assemble. Without a powered screwdriver this will probably take 2 hours, & you will be tired. -The pneumatic assembly hardware is the last thing to go on, starting with the lid. Putting the screws in will be awkward under the secured pneumatic rods. I unscrewed one end of the rod-end to get more access, then re-attached it after finishing; since the rod is under a mild compression when installed, it takes a little effort to re-compress it to re-attach it. Operation: The secure top needs to be raised & lowered with reasonable strength of two hands using equal force or one hand in the very middle, otherwise the lid goes off-center & binds-up.

I had given this a 4 star at first because of how wonky it felt and difficult to set up but after having it for almost 3 years and despite all the dragging and using ive done with the table, its still holding strong! I love the table. Its spacious and fits a lot of stuff. The stability is fantastic too. The tables a bit heavy and of the right height for most living rooms id say

Bought this almost 2 years ago and it’s serving its purpose and then some. Very sturdy piece of furniture

Very happy with the purchase. Great looking & pretty straight forward to put together. Sturdy & good amount of storage. Delivered quickly. Packaging was nice.

Overall, it looks nice and functions well. However, assembly is very difficult, most notably, the top. This portion should come preassembled from the factory.

I really like this table,,, took me about 1.5 hours to assemble by myself,,, very sturdy,,, great quality for the price,,, I gave it 4 stars instead of 5 because there's a big scratch on one leg but I decided to keep it instead of sending it back because I can fill the scratch with some touch up paint,,, table is big with lots of storage,,, recommended

Installing the upper part of the table is a bit tricky and requires two people - one to hold it up when the hydraulic arms are open while the other one screws it.

Cette table est formidable. Elle a 100 cm de longueur et 50 cm de largeur. Elle permet à entreposer des livres et bien d'autres choses (j'ai l'intention de placer l'imprimante sur la partie inférieure). La table est robuste. C'est un produit qui maximixe l'utilisation de l'espace. Elle sert de table à café, mais elle a aussi 2 espaces de rangement.

Facile a monter Beau produit

Practical and looks good but the top came with damage. A replacement was requested and sent but was in worse condition than the original. Followed up a second time which I was told a replacement would be sent, but it never came. Followed up a third time and still no solution.

Great after you are able to successfully assemble. Takes a few hours to assemble. Heavy and durable.