Welcome To Desertcart

You are browsing Seychelles's store.

We have a store for Us. Visit your country store to view the latest offers.

Ewigkeit PC4-M6 Pneumatic Fitting Push to Connect + PC4-M10 Straight Quick in Fitting for 3D Printer Bowden Extruder (Pack of 20pcs)
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6

Ewigkeit PC4-M6 Pneumatic Fitting Push to Connect + PC4-M10 Straight Quick in Fitting for 3D Printer Bowden Extruder (Pack of 20pcs)

4.5/5
Product ID: 46217989
Secure Transaction
Frequently Bought Together

Description

  • PC4-M6 bowden fitting:thread M6/3mm, inner diameter (blue end)4mm, fit for the tube whose outer diameter is 4mm
  • PC4-M10 quick fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm
  • M6 Pneumatic Fittings: premium copper and plastic, sturdy and durable; PC4-M10 Fittings is made of stainless steel,High hardness and Anti-corrosion
  • Easy to install:connecting by the outer thread of the quick fitting
  • Compatibility: compatible with 1.75mm PLA ABS 3D printer

Full description not available

Reviews

4.5

All from verified purchases

J**E

Great fittings with a touch of modification.

Great improvement over stock Ender 5 fitting. Only problem was the filament jamming against the flat bottom of the extruder (brass) fitting. Usual simple diagonal cut didn’t work, had to be like a pencil point to pass through the fitting. I took a drill bit to make a very small bevel at the bottom inside of the fitting and now the filament slips in quite easily with just a single snip at the end. The brass is soft enough to just gently hand turn the bit to make the bevel. Just a couple of twists is all it takes, then rinse with alcohol to wash out any debris. Just be sure to use a sharp bit that’s smaller then the threaded part. Just need to slightly bevel the sharp edge, less then 1 mm. Just remember to just use your hand to twist the bit and not a drill! This worked for me and I will not be responsible for anyone’s bad results trying this method.

G**H

Awesome Quality-Replace your Creality Couplers.

These couplers are really great. They have thread locker on them already AND a rubber sealing washer in the outside threads. On the inside of the coupler there are actual metal teeth that grab the Bowden Tube. This is exactly what you want. There is no slipping of the tube with these.

M**D

Flawed Fittings to Extruder ruins the Feeding of Filament through the Bowden Tube

The Fittings are off-center and when I tightened the fitting into the extruder unit, my Ender 5 could not load any filament. This even occurred when I manually loaded the filament through the extruder into the Bowden Tube and into the Nozzle Assembly. It would not feed any filament even in those conditions. It would separate my Bowden tube from the fitting and extruder. I even tried Super Gluing the outsides of the tube down into the fitting. Completely useless. If you look at the borders of my fittings, notice how one side has a lot more space than the other side to its threaded sides. This points to flawed manufacture process for my fittings. I am returning the items and likely won't by from Ewigkeit ever again because previous reviews have pointed this out to Ewigkeit and they still sent a new customer the flawed fittings. Looks to be a money grab by the company. (By the way I wish I would have read the reviews warning me because I skimmed by them when I first viewed the product.) Live and Learn.

K**H

Decent for the price. Recommended

I was pleasantly surprised by this purchase, they hold your tube really well, I did not even need to use a clip for retraction, I did how ever have one issue, the tab on some of them for retracting the tube from the fitting, not so good. I had to remove the whole fitting spinning the tube inside the whole way, and then pull the tube from the other side. In my opinion this is less of a problem then it being lose. Good luck and happy printing

T**R

Good upgrade, but holes in brass fittings slightly off centered.

These are much better than the factory Ender 3 fittings. I did notice an issue on quite a few of the brass fittings, where the entry hole is off center. This causes me to have to disconnect the PTFE tubing, unscrew the fitting from the extruder, and manually feed the filament into and through the fitting, reinstall the fitting, and re-connect the PTFE (Capricorn) tubing. I recommend pulling the PTFE tube from the fitting before unthreading the fitting, as the teeth inside the fittings will cut into the tube and could cause problems over time. Overall, a good upgrade and pretty nice compared to the factory Creality fittings.

M**.

works ok w. Cr-10 3d printer , but snags filament

good grip on the bowden, collar is well made - but - tolerance is just a *little* tighter inner diameter and snags the filament when changing rolls, PLA. seems the expanded PLA from the hot end is just large enough to snag at the throat of the connector so I have to unscrew the connector and clip off the pla then reconnect.. not exactly fun..

A**O

Better than new!

Replaced my fittings on my Ender-3 and it works better than new, along with some Capricorn PTFE tubing. Smooth sliding and fit well! I've been printing non-stop for about 6 months now, and had a jam, so I figured to replace these (after some video suggestions) while cleaning out the hot-end. Great fix for a low price (especially per connector)!

P**K

good replacement

I have an Ender 3. I replaced the stock fittings since they are not easy to use when adjusting the tubing. I also updated to Capricorn tube and these work great with it. They fit perfectly and compress easily to slide the tube through it.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.

Currently out of stock

Seychellesstore

Sorry, this item from our Seychelles store is out of stock. We're restocking soon—check back or contact support for similar products.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Farhan Q.

The delivery time was excellent, and the packaging was secure.

2 months ago

Sneha T.

Received my product in pristine condition. Great service overall.

1 month ago

Ewigkeit Pc4 M6 Pneumatic Fitting Push To Connect Pc4 M10 | Desertcart Seychelles