Upgraded 220W Plastic Welder, 2 in 1 Plastic Welding Kit Plastic Repair Welder Kit 1000PCS Hot Stapler Soldering Gun with 100PCS Plastic Welding Rods Car Bumper Repair Kit for Most Plastic Repair

I bought a cheaper $20 plastic welder previously, and this one is definitely worth the extra cost. It heats up much faster, feels more capable, and the included extras alone make the kit a better value. The variety of plastic welding rods is especially useful. After working with plastic repairs more, I’ve learned how important it is to match the same type of plastic when adding filler material or reinforcing a crack. This kit gives you several different plastic types to work with, which makes it much easier to get a stronger, cleaner repair instead of just melting random material into the joint. The hot stapler function works very well. It gets hot quickly and lets you sink staples into cracked plastic fast, which is great for bumpers, containers, panels, tabs, and other broken plastic pieces. My only complaint showed up during heavier extended use. I was repairing a large storage container that had cracked down the side, and while using the heat/spade attachment to melt and blend the existing plastic with added filler material, the unit seemed to overheat and throttle itself down. It would work very hot for about 30–45 seconds, then drop to a weaker heat level that was not very effective. After letting it cool for a couple minutes, it would heat back up and work again, but only for another short burst. So I would not call this ideal for long, continuous plastic welding jobs with the heat-spade attachment. For shorter repairs, crack reinforcement, hot staples, tabs, bumper repairs, and general plastic repair work, though, it performs very well and is a big step up from the cheaper basic kits. Overall, I’m happy with it. Great value, fast heat-up, useful accessories, and very handy to have around. Just be aware that for extended welding/blending work, you may need to give it short cool-down breaks.

I’ve never done plastic welding but this was a great kit to get started with. Very easy to use, tons of plastic material and accessories, which proved very useful for my first big project. A big storm had flipped and buckled the plastic slide on a play set at our church. While the broken wood parts could be repaired readily and inexpensively, to replace the slide was going to be $600. For the low price of this welding kit it was worth a try to get the kiddos playing again. It worked surprisingly well and was very easy to use. The results aren’t going to be picture perfect, necessarily, but this can save you time of money. For this project I made a bend on the squiggly staples to match the curved surface, cut the wires low with side cutters, used a Dremel to grind down the ends of the metal posts and then filled in with the supplied plastic. That was to keep the posts from catching or cutting the kids’ hands. Not pretty, but it worked, and I tested the slide myself. The welder has plenty of power and heat. It does get warm to hold after long use, but just take a break and let it cool off, or wear work gloves

Love this kit. Saved a ton of money fixing some pieces on my car that had broken off. Takes a little of practice. I haven't used it on any things that would be visible so appearance hasn't been very important to me. I imagine that would take more practice. The kit comes with everything you could possibly need and the heat gun works great. The gun does have a limited of time that it can be on before it turns off for safety reasons which might make your job take a little longer then planned.

Like anything that melts oil based plastics, it is very important to have adequate ventilation when using this tool because most are carcinogens waiting to be released and inhaled if not careful. That being said, this is not a heavy duty tool, but for the occasional do it your-selfer it fills a need nicely. Most everything we buy has some sort of plastic or hydrocarbon based olefins. This is a great tool and can make pretty decent repairs with practice. As mentioned, it is a light duty tool based on the thin gauge power cord, a series of short bursts works well when attaching the staples, heat just enough to melt the base plastic, however using hot knife and trowls will overheat the tool if used continuously. This kit came with a generous assortment of staples, plastic rods and mesh.

This product came just in time. I have already used it on several urgent repairs. It works great. However, my technique to make it look professional needs some practice. Nonetheless, the repairs came out rock solid. My first use of the Plastic Welder was a cracked plastic bucket. The repair was quick and the bucket doesn't leak. See photo. The parts provided in the kit is vast and very much appreciated. No skimping on supplies with this company. Definitely worth the price and purchase.

Excellent for my needs. I had a project on my ATV where I had a plastic piece that was cracked. It wasn't something that was seen easily, but it was allowing mud into an area that I preferred it not be. The new part was over $50, so I thought I would try this first. It works well and easy to use. I do wish it had better instructions of all of the things that come in the case, but I have sort of figured most of it out. But for example there is plastic rods for repairs, there are different shapes and sized of the same color and not real sure when I should use which one. I got the job done and used one of them, but was it the best for the job...don't know. And the case is loaded with stuff...even has new clips to lock the lid closed. The one thing I high suggest you watch out for is the small diameter of the wire of the staples....several times I ran them into my fingers and oh man does that hurt. Completely my fault, but really easy to do...so watch out.

This plastic welder was the solution to a big problem and any similar problems in the future. It was simple and easy to use right out of the box and definitely a great value for the price!

Purchased this product to repair my Gorilla cart that had a couple of breaks in it. I was happy with how the unit worked with the hot staples. But, the unit failed on the plastic weld with the mesh. The gun overheated with continued use and I had to put it into a freezer to cool it down. I ended up pulling out my foam knife and bent one of the blades over to complet the task. I actually had to turn the knife down so it would not burn the plastic. Great Idea but should combine this with the foam knife in place of the one that came with it. Also, found that using my grinder with a cutoff blade worked really well in trimming the staples and smoothing out the area prior to adding the mesh.

We were very happy with the product when it arrived. Plenty of staples and plastic sticks were provided. The product seems nice and sturdy also. We were however very disappointed when we used it because the interior transformer got damaged on first use. The reason for this is that the gun happened to be a 110V type when in my country the mains is of 220V. There is no indication on the product information page or purchase page that this gun is of the 110V type because in such a case we would have ensured to buy a gun which was compatible with the 220V mains of our country!

I am very happy with this purchase, after looking through a lot of kits available this one seemed to have everything needed to get started and actually finish the repair with staples, mesh and plastic. It comes with a large amount of wire staples and plastics and a case with real hinges, not just bent plastic that will break. I contacted the seller about the probes on the gun I received being about 5 mm different in length, and needed to fuss with the staples a bit, and they sent me a second complete kit within a week. very impressed. the second gun is perfect. The seller also answered some questions I had about the plastics .. good service In my opinion. I used it to repair a 2003 Honda civic front bumper and it worked very well. I used staples on the inside then covered with wire mesh and plastic, it is very strong. I also used PC-Super epoxy to replace/repair the tabs. for the price this is a great deal.

Si sirve para lo que es recomendado. Bastante útil.

I recently purchased the this Plastic Welder Gun, and I must say, it has completely exceeded my expectations. As someone who loves tackling DIY projects around the house, I've often struggled with fixing broken plastic items effectively. This welder gun has turned out to be the perfect solution. Firstly, the build quality is exceptional. It feels sturdy and well-made, which gives me confidence that it will last for years to come. The ergonomic design makes it comfortable to hold and use for extended periods without causing any strain on my hands. The performance is where this tool truly shines. It heats up quickly and maintains a consistent temperature, allowing for precise control during welding. I've successfully repaired everything from cracked automotive bumpers to household items like toys and kitchenware with ease. The welds are strong and durable, and I haven't encountered any issues with them coming apart. Another feature I appreciate is its versatility. The kit came with a variety of plastic rods in different colors and materials, which enables me to match the exact type of plastic I'm working with. It's incredibly convenient not having to hunt down specific materials separately. Furthermore, the user manual provided clear instructions, making the setup and operation straightforward even for someone like me who isn't a professional welder. I was able to get started right away without any confusion. Overall, I can confidently say that this Welder Gun has become an invaluable addition to my toolkit. It's reliable, efficient, and has saved me both time and money on numerous repair projects. Whether you're a DIY enthusiast or a professional looking for a dependable plastic welding solution, I highly recommend giving this product a try. It's definitely worth every penny!

My first time with one of these. I purchased this kit to repair a truck bumper. It has a good assortment of plastic welding rods. All kinds. Many bags of staples. Various. Nice exacto knife, and a decent set of side cutters. Stainless mesh, metallic tape, and more. That said, trying to repair the mounting holes on my bumper quickly lead to the gun shutting down. And the handle gets pretty warm. It does not seem up to the task of melting the larger flat bars. Overheats quickly, and takes a while to reset. At least there is a protective circuit. Worked better with the thin round rods. Have not yet tried the staples, but I have a project in mind for that. Suspect it is a good stapler. Welder... meh.