iSANMATE PLA+ 3D Printer Filament, Pla Filament 1.75mm Rainbow PLA, Color Change Filament Dimensional Accuracy +/- 0.03 mm,1 KG Spool

This is a great filament! The print quality is astonishing on any settings and I can always rely on the adhesion to be perfect. The texture and deep color of this PLA makes this by far my favorite filament to print my Flexi Pegasus with. Everything always comes out looking and feeling great from test prints to final products. This is a must buy for any Flexi Factory model!

I am a longtime SUNLU user, and was a tad unsure about trying anything else. However, with my recent purchase of the Kobra 2 Pro, I needed some high-speed filament, particularly for a project currently in progress (it is currently unfinished, but you may or may not recognize it as the third titan in Sonic Frontiers.)Anyways, SUNLU's high speed pla doesn't seem to have been doing to well in the market, and Anycubic was my next option. However, I don't like their cardboard spool (absorbs lots of moisture) and began to look for alternatives. iSANMATE caught my eye at its cheap price, and had generally good reviews, so I decided to give it a try.Needless to say, this filament is good stuff. It's also Pla+. so it is stronger than regular Pla. It prints smoothly and looks good. My roll was dried well, and the few hours it spent in my filament dryer made little difference in performance. iSANMATE will be a brand remembered for future purchases.

I'd been wanting to try wood filament for a while but hesitant to switch nozzle sizes. Found a good deal on the iSanmate wood filaments so thought I'd give it a go. No regrets. And now I like the speed of 0.6 nozzles too.I started with the Baby Groot planter model at 100% in the darker wood. Looked great but too dark for Groot. No problem, I also got the lighter wood. Wife saw it and wanted it as large as I could make it. The dark model is at 100% and the light at 250%.I've printed 3 large so far (~ 9 hrs each) and had no problems with the filament clogging (0.6 mm nozzle). I did have one adhesion problem but in retrospective I should have noticed the skirt lines didn't quite mush together. I'm getting stringing, but I'm printing at 2x normal speed for Ender 3 and haven't tweaked retraction much since the change. I'm sure it can be reduced.My first order included 2 spools (one light, one dark) and 1 spool came damaged. The filament was fine but the spool was cracked in multiple places. No way it would spin on my rollers. I contacted iSanmate and they took care of it very quickly with no questions.I've got more ideas for this filament, so definitely buying more.

Yellow Pear Wood Review. I had no issues printing with this filament. It clogged my nozzle once but after tweaking, I was able to print a flower pot for over 20 hours. Quality came out pretty good however I still don't think it looks like wood. It looks more like a clay planter more than wood.

Nice flesh tone. No clogs. Smooth extrusion. Highly recommended for 3D Makers!

I have Creality CR-10. I am in love with this filament! It's so hard to find PLA+ in rainbow color, and I really like that it's matte. I didn't buy it specifically for the matte texture but I like it better than the typical PLA shine. Really love the bright colors and I've had no printer issues with the filament at all so far!The colors transition fairly slow so you need to batch print small items to get them to show a gradient. The Acorns pictured are 0.4oz weight, 56mm height, 40mm (cap) / 32mm (body) width. I printed them 6 at a time to get that result. The orange section in particular seems a lot larger than the rest of the colors, so I ended up with a batch of 6 that were entirely orange. That might just be because it transitions into yellow so slowly that it's hard to tell.

iSANMATE rainbow filaments are my favorite gradients on the market. They are reliable, don’t cause clogging, and create dynamic coloring throughout my prints! This review is after using their filaments for a good couple of months and at least a dozen different rolls.

This rainbow filament isn’t just PLA+—it’s PLA+++. I’ve bought this rainbow spool more times than I can count because every dragon I print emerges like it just flew out of a fantasy novel with a flawless ombré glow-up. Layer lines? Don’t know her. Warping? Never met him. These prints survive kids, time, and epic dragon battles—and still look showroom fresh years later.If unicorns had a 3D printer, this is the filament they’d use.

Come da descrizione ottimo prodotto

Ich habe das iSANMATE Rainbow PLA Matt Filament in 1.75mm ausprobiert und bin absolut begeistert von den Ergebnissen! Die matte Oberfläche verleiht den Drucken einen einzigartigen und ansprechenden Look, der sich von herkömmlichen glänzenden Filamenten abhebt. Die Farbverläufe sind einfach atemberaubend und bringen eine kreative Note in meine Projekte.Das Filament lässt sich sehr gut verarbeiten und bietet eine hervorragende Druckqualität. Ich habe mit den empfohlenen Temperaturen gedruckt und die Haftung auf dem Druckbett war durchweg zuverlässig. Selbst bei komplexen Modellen konnte ich eine hohe Detailgenauigkeit erzielen.Ein weiterer Pluspunkt ist die Benutzerfreundlichkeit – das Filament hat sich problemlos durch meinen Drucker ziehen lassen, ohne dass es zu Verstopfungen oder anderen Problemen kam. Der Preis ist ebenfalls angemessen für die Qualität, die man erhält.Insgesamt kann ich das iSANMATE Rainbow PLA Matt Filament jedem empfehlen, der auf der Suche nach einem besonderen Filament ist, das sowohl ästhetisch ansprechend als auch einfach zu verarbeiten ist. Ich bin mehr als zufrieden und freue mich darauf, weitere Projekte mit diesem tollen Filament zu realisieren!

Una maravilla de filamento. Si haces figuras altas, es cuando mas provecho le vas a sacar.

First time I try this brand of filament, and after a few prints I noticed a very clear change i colour, the first 10% of the spool was almost white glow in the dark, and then it turned greener, so I ended up with a skull with a white jaw and green for the rest. I might have got a bad batch of the filament as the green is quite faded, but the vacuum bag was unbroken and the filament does not appear brittle. I will use it for casual prints and test objects, but I have already ordered another glow in the dark to use when nothing can go wrong.

HS pla rainbow is great but Isanmate and other filaments manufacturers should stop stating speed and use volumetric flow.I can print as fast as the stock nozzle heater can handle (mid 30's flow) this allows for fast and great looking prints.But un like other pla filaments isanmate uses something in this and many others pla filaments that makes it stinky when printing, so use an air extractor/room exhaust to ensure a safety. (We have exhaust vent setup)