Euro Cylinder Door Lock ANTI-SNAP ANTI-DRILL ANTI-BUMP ANTI-PICK Brass 40-10-40 Awarded the British Standard Kitemark from BSi, number KM 561977 This is a high quality 6 pin TS 007 1* BSi Kitemark Cylinder that offers a low cost solution to lock snapping and lock bumping. It is manufactured with added steel pins inside the cylinder for enhanced strength and security to make it stronger and even more resilient to drilling than ever before. This high security cylinder has extra features to protect against forced entry. These include: Anti-Snap: The cylinder has an anti-snap line on each end so when force is applied to either side, the cylinder will break away to the anti-snap line only and not at the cam point. This prevents entry being gained through the exposed cam. Anti-Bump: The cylinder has a 'zero lift' pin which sits far higher than the rest of the pins in the plug ensuring a bump key shoulder cannot touch the pin to bump it. Anti-Pick: 3 x Stainless Steel Anti-Pick pins in each side of the cylinder. Anti-Drill: 4 x hardened steel Anti-Drill pins in each side of the cylinder, 2 in the plug and 2 in the barrel. These require a special drill bit to break through. Common drill bits will have no effect. ** Our Anti-Snap cylinders are measured from each of the cylinder to the central black cam ** Measuring your cylinder Not all cylinders are the same size, so it is important to measure your cylinder to ensure you order the correct item. To measure your cylinder, remove it from the door and measure from one end to the centre cam, and then again from the opposite end the edge of the centre cam. With the cam being the '10' measurement, this should give you the size you require i.e. 35-10-45.
Trustpilot
1 week ago
1 month ago
