Bissell Style 8/14 Lift-Off Bagless Belt (Pack of 2)

Came with 2 belts. You need to turn the belt sideways in order to get it around the axil of the motor. In my case, I had to do additional work to make it work. 1) I need to remove the roller and clean the inside of the 2 ends so that it can roll freely. 2) I needed to clean the axil of the motor by scraping off the burnt rubber from it. FYI, the reason my belt broke in the first place was because the roller was stuck due to years of hair entanglement, so the motor spun and melt the rubber. Hopefully your case is easier than mine. But the belt does its job. And I remember shipping speed was on par.

Quick delivery and it fits my Bissell perfectly. My old belt lasted about 7 years until I smelled a slight burning rubber smell. I knew it was finally time to replace the belt. Hopefully the new belt will last a long time too.

Good belt. It does fit the Bissell model 3760-1 that I purchased back in 2007.My first impression was that it looked too small to work. It does work though.Thread it through the motor pully first, then put it around the vacuum roller, then just pull the vacuum roller into place to stretch the belt. The belt will stretch.The one I took off looked a lot longer, but after 13 years, I'm guessing it was probably just stretched out.Make sure to spin the roller around a bit to get the belt situated/centered before putting the cover back on, and you'll be all set. :)

They claim this is an OEM part, but I found the quality to be poor. The belt stretched and my vacuum brush stopped turning again after just a few months with fairly minimal use.

I used this on my Kirby because I'm cheap and I do what I want. Nice cheap product and it works great on a thousand dollar vacuum.

I needed to replace the belt on my vacuum cleaner and these belt are the perfect fit. The vacuum cleaner is running great.

Good belt, did the job

So far this one belt has lasted with no squealing or for that matter, no other mishaps or problems. I expect these two belts combined, wil last as long in not longer than the lifetime of the vacuum cleaner itself.

It looks too small but just needs a little stretching and it fits.