VIVO White Counterbalance Freestanding Deluxe Arm Mount Tabletop Stand for up to 27 inch Screen (STAND-V100W)

This stand is almost overbuilt, with heavy gauge steel for all parts. The strategic weakness, which limits the weight of the monitor, is the vertical swivel adjustment on the swivel head. The friction surface, composed of ordinary hardware, has insufficient holding power. It tends to slip, even when tightened hard. It barely holds a low end 19" monitor that might weigh 6 pounds.A better design for the vertical swivel joint would use serrated surfaces to increase locking strength.So if you try to use this with a high end monitor, which can weigh a lot more in the same size range, there's going to be trouble. You might be able to prop the vertical angle with a dowel. Then you'll appreciate the weight of metal you got for the price.The horizontal swivel is not impacted by this defect.The height locking mechanism is very clever, has positive locking that does not rely on friction, and has much more capacity.Some of the screws barely fit the included wrench. You can probably find a solution in your tool drawer.One corner of the VESA plate was bent, as in "defect." It did not affect attaching the monitor.Down to the cheap glossy alkyd paint, this bears all the signatures of a small China garage shop execution, and it's pretty well done for what it is.

This mount was perfect for using my 27" monitor in portrait mode. It was easy to assemble and feels incredibly sturdy.I have 2 gripes however:1. It was disappointing to see that there is a measurement on the neck of the mount facing the user. It's ugly and sticks out on any clean setup. I will be covering mine.2. The pain on this mount was terrible. There are a couple of chips in the paint and a few big ol' paint boogers. I also had what looked like grease smudges and fine scratches throughout my mount.With that all being said the mount is still sturdy as can be and fits it's general purpose perfectly.

definitely sturdy and easy to assemble. a very nice / quality product at a great price. it solved a need for me- wanting to have a monitor over my laptop monitor without mounting anything.the only issue I have is that it won't stay at the proper height- in fact it doesn't stay up at all. I had to just make my own fixed height with a rig job that involved tape- so I was able to get the result I wanted in the end- I can't adjust the height now, but I don't need to. was a bit disappointed with that- but considering my need, I chose not to pursue reaching out for a replacement, assuming my stand is defective.

I recently replaced a wall-mounted monitor because the capacitors were failing. In my spare time, I took the thing apart and replaced the caps and revived it. The original stand was long gone, so I got this. It was going on an old desk and the wall behind it had antique white wall paper, so the color of the stand influenced the decision. (Remounting on the wall was nixed by my wife). Also the adjustability was a factor - height, tilt and twist.Quickly shipped, very easily assembled and it looks great. It there is any downside, it is that the tilt-adjustment hex screw required quite a bit of force to lock the heavy 24" monitor into position.I'm quite pleased with the result and recommend the item.

I was looking for a stand that would not only be strong but have a minimalist feel as well as sturdy and functional. These checked all the boxes for me. Its easy to install, easy to use and looks great on my desk. It frees up the space on my tiny desk to use for other stuff. Overall great purchase. One small minor detail, the base came with few chips but I can live with it. Also wish the warning sticker in yellow on the arm could be easy to peel off, I'm still hacking away at it, but overall super happy.

Bought this for the top of a dresser on my daughters dorm room for a 24” flatscreen. It’s perfect. Solid construction- easy to assemble and worth it. White so fit white TV and decor. Telescopes up and can adjust both angles - small and compact and not bulky. Don’t hesitate

The stand is heavy and has a rich lacquer - looks fantastic and is quite sturdy (I have 27” screens). Only criticism is that I bought two (2 monitors), and their heights are not aligned.

Got this for my HP Omen 27i which comes with a stand that's nice but doesn't fit on my desk very well. This stand is sturdy, looks decent, and has lots of adjustments. Came with all necessary hardware.Room for improvement: it has an ugly brand decal on the base, as well as some ridiculous inch markings on the column itself which don't make any sense (vivo, remove these!). The height adjustment doesn't move smoothly up and down, it's a cheap ratcheting mechanism where if you want to lower it, you raise it all the way up and then it drops back down. The "cable management" is a cheap plastic clip.

Antes que nada, el producto llegó en buenas condiciones, con su caja y todas sus piezas.La base es completamente de metal, al momento de cargar la caja te daras cuenta de ello, tiene buenos acabados y es bastante elegante.No tuve problemas a la hora de montar mi monitor de 27 pulgadas que es lo que se recomienda como máximo, las instrucciones vienen en inglés pero con imágenes, por lo que es muy sencillo montarlo.Ahora bien, la razón por la que le puse 4 estrellas es por un detalle de su mecanismo de inclinación de la pantalla, en las instrucciones te marca que debes usar la llave Alen que te proporcionan para "apretar" un tornillo y ajustar la inclinación deseada del monitor, y ahí está el problema, si necesitas aplicar bastante fuerza para poder ajustarla bien, cosa que con la llave que te viene en la caja no es lo más cómodo, en mi caso, tuve que usar mi juego de llaves que tienen mango para poder aplicar fuerza sin mucha dificultadPero a pesar de ello, por lo visto, con el paso de los días el monitor estará "bajando su inclinación", debido a que ese mecanismo no es el más fiable.¿Lo recomiendo? Si, pero si tienes un monitor de 27 pulgadas si necesitarías tomarte tu tiempo para ajustarlo, y si tú monitor es pesado, yo no te lo recomendaría, eso sí, si tienes un monitor más chico, ahí no tendrías problemas con que le gane el peso al mecanismo de inclinación

This monitor stand is very sturdy! Its a bit tideous to balance it with one hand because the base is a bit heavy when installing. Also, there is this small dent or whole on my product that's why I only give it a 4 instead of 5 stars. Still a good and sturdy monitor stand!

Picture doesn’t do it justice. This is the best mount I’ve had to date. It’s so clean and sturdy. I love the clean all white look. The thick steel is extremely heavy duty. Monitor doesn’t wobble what so ever. Adjustable height is amazing. I just love it.

Very easy to assemble. All the hardware to attached the mount to your monitor are included.I attached my 27” Acer LED monitor without issue. The stand is made of steel/metal and is totally stable and the height adjustability works very good.This was a great addition to my new home office now that I have to work from home with the COVID situation.

I have a small desk that i can't really clip a monitor arm on to. So glad i came across this monitor stand. It is awesome!