Shappy 3 Pack Security Wall Mount Indoor and Outdoor Mount Bracket Adjustable for Wyze Cam Pan 1080p Pan, Arlo Pro 2, Arlo Pro, Arlo, Arlo Cam and Other Compatible Models (Black)

I purchased these so I could mount 3 x Oculus Rift sensors up high to give better coverage than when they were at desk height. After a fair amount of cursing trying to get them mounted in a Victorian house with hideously warped walls I'm really happy with the final outcome.For the price I think they are incredibly good value and have done the job perfectly. The plastic part does feel like it could break quite easily if over-tightened and I don't think you'd want to attach a heavy camera to them but the Oculus sensors weigh almost nothing when they are removed from their stands. I also removed the thumb screws from the threads on my install as you can see in the pictures... I just felt they looked nicer without them (but it probably made the installation a little more fiddly trying to tighten up the camera to the thread)Once they are mounted to the wall they can be adjusted although it can be a little fiddly initially. Another reviewer mentioned greasing the ball joint a little and that does make a big difference. Once they are adjusted and tightened up they feel very secure.Since installing these with my Oculus Rift sensors my play area is now slightly larger and I can also pick up virtual items off the ground which I struggled to do before.For other people considering this set up I also needed to purchase a 2m and 3m USB 3 extension lead for my two front sensors and have had 0 issues with the Amazon Basics USB 3.0 extension leads. I'm not sure if passive extensions are properly supported with the Oculus Rift sensors as it takes the total length to 4.5m and 5.5m respectively but surprisingly it's working perfectly for me with no poor tracking or loss of frames.Highly recommended!

So far no problems. They are plastic but seem robust once they're up I don't see an issue. The other review talk about loose problem, but I have no issues, just need to finesse the position vs tightening barrel but I was able to position after installing. Better than the more expensive options I think.Does what they are supposed to do and cheaper than others. Worth the moneyPrice is cheap but with excellent quality, perfect fit for my old Arlo cameras. It is easy to install, just need to consider the position before installation, and the base can loosen or tighten the bracket.

Good for the price. The biggest issues for me are firstly it is difficult to tighten them up enough to hold the camera in position, and secondly after 7 or 8 months or so of outdoor use, the metal parts are starting to corrode.The body of these mounts are plastic so are not as robust as the official Arlo ones which are metal.

If you have the stalk set perpendicular to the wall, they're nice and easy and stable. But the tightening mechanism is also the setting for the angle of the stalk, meaning you have no rotation control or everything loosens and goes floppy.

Bought these for mounting my Oculus Rift sensors to the wall, and they've done the job perfectly! Highly recommended for anyone wanting a quick and easy wall-mounting solution for their Rift sensors. As with anything made from cheap plastic though, don't wind the screws up too tight! Does the job perfectly and holds the Rift sensors solidly. Great product and great price!

I used one of these to mount my Arlo Pro wireless security camera. The camera has been in-situ approximately 6 months through a variety of weather conditions. I mounted it by drilling through the soffit. Installation was quick - 3 holes drilled and the base screwed into place. The mounts come with the required fixings which should be good for most walls or materials. The camera is about 250g with the battery installed, so a decent weight to mount and retain in place.With the camera mounted it can be a little bit fiddly to adjust but once done, its solid and secure. That said, If I was looking for a mount for the Arlo Pro camera and I knowing what I know now with this product I would happily buy it again.

Easy to install but be careful not to over tighten the securing screws as the main plastic base is a rigid plastic and will crack if too much pressure applied, I did this but resolved easily with a small washer on the head of the screw and all works fine giving a good rotating angle for the camera in all directions and being plastic is good for coastal areas

Used for mounting Oculus Rift sensors to my wall only have 2 so I have a spare mount for when one of these breaks due to the flimsiness offs the plastic. Mounting hardware included was nice. Does a good job of clearing up my desk and making the coverage better.

Ottimi, sia per qualità che per il prezzo pagato. Data l'attacco standard posson essere usati per sotenere molteplici dipositivi, nel mio caso il sensore vento netatmo sul muro del terrazzo e la videocamera nel box auto. Consiglio l'acquisto

Ich habe eine Deckenhalterung für Videolichter mit 1/4Zoll Gewinde gesucht. Was soll ich sagen: Gesucht, gefunden, ausprobiert, gleich noch weitere drei bestellt. Ich hatte bedenken das sie ein Videolicht vom Gewicht nicht halten würden, würde allerdings positiv überrascht. Einmal festgezogen bleiben sie perfekt in Position, auch bei steilem Winkel entgegen der Schwerkraft. Für den Preis kann man sich nicht groß beklagen, allerdings ist die Verarbeitungsqualität doch etwas mau. Bei einer Halterung aus Bestellung 1 ließ sich die Anziehschraube kaum drehen. Also für Festinstallation - wie eben bei einer Überwachungskamera - top, da man dort nicht groß dran rüttelt. Videolichter: Nur wenn sie einmal eingestellt werden und danach eigentlich nicht wieder angefasst werden sollen. Ständiges verstellen, Montage und wieder abnehmen ist sicher nicht die beste Idee. Eine DSLR mit Magic Arm ist übrigens definitiv zu schwer... Außer ihr arbeitet im Kugelgelenk mit etwas Patex kleben statt bohren. Dann könnte es womöglich gegen. Aber das Zeug hält eh Alles. Info: Ich habe natürlich keine großen Videolichter daran befestigt (Neewer T120).

Purchased these hoping they would work with the Arlo cameras and I was not disapointed.The price was right and the quick shipping was a plus.No issues with installing and they fit perfectly.

Staffe fantastiche!!!... Le ho utilizzate per posizionare i sensori di Oculus Rift CV1 intorno alla stanza dove gioco. Totalmente orientabili, assolutamente poco invasive e gradevoli da vedere. La regolazione avviene tramite una ghiera rorante e permette il posizionamento millimetrico dei sensori con la massima facilità. Si installano a muro con 3 fisher ma considerando la leggerezza dei sensorini dell' Oculus Rift, anche con 2 si regge perfettamente. Suggerisco caldamente a chiunque abbia la necessità di posizionare a muro i sensori del RIFT ma ovviamente vanno benissimo anche per sostenere altre tipologie di apparecchi tipo telecamerine e sensori . Spero che dalle foto si riesca a percepire l'eleganza e la poca invasività degli stessi. Sperando di esservi stato utile vi saluto, ciao.

J'ai acheté ce produit pour tester le fait de monter mes CAPTEURS OCULUS RIFT dessus.Cela fonctionne parfaitement.Le produit semble fragile mais en prenant soin de ne pas forcer le montage des capteurs,et une fois fixé aux murs, il n ' y a aucune raison de réussir à les casser.Bref, TOP ! Merci.