First4Spares Carbon Brushes & Holders for Zanussi Washing Machines Pack of 2

Brushes arrived next day just in time as machine stopped working completely. Arching / sparking sound while motor was working was the hint to replace brushes. Fitted a Zanussi ZWHB 7160P perfectly and machine runs like new again. Spins at full speed again and washing comes out much drier. A small mirror is helpful when installing. Can't tell how long these will last but quality looks good.

Used on a Zanussi washing machine. Easy to order. Fast delivery. Correct product supplied. Good price for goods supplied.

Arrived on time well packaged, not an exact match for the brushes on my machine but with a little trimming with a knife and soldering some smaller terminals on to the wiring to match my machine is back up and running, much cheaper than a new motor or full machine.

Bought these to replace the worn out ones in my 9 year old Zanussi machine. The machine wasn't spinning at all. These fitted perfectly and the washing machine is back up and working now! If you have the correct tools, its an easy swap over.

Dangerous, please don't order these parts. Worked well until today when I luckily returned from the shops to find my machine smoking and partially on fire. The cause? One of the replacement brushes had somehow melted and started a minor fire. I'm a manufacturing technician, I fitted them correctly and am knowledgable of these things. These should not be sold and can potentially cause deaths. My washing machine and kitchen floor are potentially ruined but glad that I controlled what could have been a disaster. Remove these defective items please.

The washing machine brushes I ordered arrived within a couple of days, and were exactly as they described. Well packaged and easy to install. The quick delivery meant i was without a machine for only a couple of days, so i really recommend!

I received the brushes next day with prime. I opened the package and immediately found that the electrical contact tag was to one side not the rear as in the original. Also the locating pegs are different and the screw holes are different meaning the front of the brush casing would contact the motor.However, the plastic casings are easy to open and swap the new brushes to the original cases. Follow the pictures to see how.Important - Study the original before you take it apart ! Make sure the angle on the brush slants the correct way, then, using a sharp stanley knife, cut a small opening in the side of the original casing to allow the metal tag to fit to one side. As long as the opening reaches half way down the casing, it should be fine. Bend the tag out 90 degrees and insert the brush assembly ensuring it fits in the lengthways slot correctly. Reassemble the casing and refit to the machine. Pro-tip : gently squeeze the female spade terminal that's connected to the machine before connecting to the brush. This ensures a good contact, no wiggle !Hopefully last a long time, but would have been nice to be a straight swap over.

Package arrived early. Brushes were easy to fit with a small bit of adjustment. The holders were not an exact match to the ones they were replacing . Overall the item was good value and solved problem.

Esta muy bien e solucionado la avería que tenía mi lavadora y ahora como nueva 😁😁

ottimo qualità prezzo ,

Très bon produit et bon rapport qualité prix.Mon lave linge ne voulait plus fonctionner mais avec ses nouveaux brosses charbon elle fonctionne comme neuf. Je crois qu'elle est reparti pour qu'elle que année. Je vous le recommande vivement.

A sauvé notre machine à laverNickel

Todo perfecto, quitar y poner