eBoot 8 Pieces Bearings Skateboard Bearings Longboard Roller Skate Bearings 608 2RS, Double Shielded, Red and Black

Without much doubt Fidget Spinners have taken a hold of kids interests, as such my kids wanted to buy some, instead I agree to make some.These bearings looked kinda nice colours, and were available on a next day through Prime, so seemed to be what I needed so purchased them.Each bearing seems well made and is lubricated ready for use straight away.As an engineer, I'm very impressed with the look, feel and accuracy of the dimensions stated on the listing.I got the 3D print file from thingiverse dot com, so enjoy, each one took 37 minutes to print in standard resolution and a few seconds to fit the bearings, each one took 4 bearings, 3 outside, one in the middle.Sarah

I used these as the bearing and the weights on a 3d printed fidget spinner and they are perfect. The bearing had to be re-greased with finer oil to make them spin, which was simple. 1. Remove the cover and clean with washing up liquid and water. 2. Rinse thoroughly with hot water 3. Let it dry and then lube with a light grade oil (I used WD-40 silicone). I don't have a vice to push the bearing into the spinner but the extension from a 1/4 inch socket set and hammer did the job. Works like a champ. Thanks for the design, my 15 year old loves having a home made spinner that looks as good and works as well as the commercial ones.

Pretty great bearings, my skateboard is now superfast! With these one can spin a wheel and watch it spin free for 10-15 seconds easily. Maybe 2 out of the 8 were duds, but even those still perform decently. At this price, I'm buying some more!

The value for money is great - order arrived really quickly and fit onto the skateboard perfectly. Sheerness and thickness are great

Only 4 of the bearings were decent

Very good quality for the price, got these to keep a little girl happy by fixing her scooter that bearings had collapsed on and sent her over the handle bars, shes now got up and faster than ever on the school run

Had cleaned up my board nicely to go with the new bearings, all was looking well; wheels were free spinning and the board was rolling nicely when I got on it. Half an hour later and the wheels were locking. Get home and realised most of the bearings had locked and one had ruptured (is that the right word?).Utter waste of money and will not be purchasing these again

What can I say. They are bearings, they run smooth and seem to last well. What more do you want :)