Revell 39604 Contacta Professional Glue 25g

Very good plastic glue

Much better than the junk that games workshop sells for their plastic model kits, this plastic glue is also better value, the metal applicator tube is its best feature because it allows you to be super accurate on parts of models with minimal contact points and helps stop you slathering way too much of the glue all over your expensive model kit.That leads on to good value point number 2, because you're being careful not to slather your glue everywhere, the applicator saves you replacing the glue more often than you'd like, i.e, it allows you to be frugal with the glue you use and one bottle will last ages.other than that? it's a bottle of plastic glue, it does its job, cures very quickly and comes with a plastic cap so the needle doesn't dry and clog up.great piece of hobby kit.

Having recently made the move back into model making, it was good to see that the technology had moved on a bit since I was a child. Previously glue came in a tube with a large nozzle, and most of it ended up on both the model and your fingers. I very much prefer this thin needle type appliance. It's much easier to dispense smaller amounts of glue than it ever used to be. Even so, it is still possible to squeeze out too much glue from time to time, and also once in a while when the cap is pulled off the needle comes out with it. To combat this I wipe any excess glue off the end of the needle with tissue paper before putting the cap back on. One containers has been sufficient for several models and shows no sign of running out yet, so value wise it's excellent.

I have broken my car roof box by driving under barrier, it split in two places. Box had shape regained but I needed something to fix my new and expensive roof box.After loads of research I decided to go with revell, because how it works- melts plastic edge and then glues together. Received quick , applied on the split seams of the box - works as been told. It melts plastic little and when you put edges together it glues it. I did glue it , left it to dry , then just to make sure applied over glued already seams once more and after one more time to make sure it's waterproof. After comletly dry in few days took out the box and run water with hose ower it for some time to see if its waterproof. Not a drop inside ( there was two splits over 20cm each ). So far after two trips with roof box when raining all good.Tried to fix my boys water gun water container which split too , to see if it will work on different type of plastic, it was total useless on that one it just stayed on the top and when dried out peeled off. Rigid plastic - wery good, toys plastic - useless.Hope this helps to make a decision to someone.

My first time buying/using this adhesive and I'm really impressed.For precision application of adhesive this product is great, the needle is quite long and thin which allows you to apply a precise drop - the design is perfect for having to apply adhesive in deeply recessed parts.The parts i've applied the adhesive too have bonded well, and there isnt a lot of mess either like what other adhesives i've used have left me with, one of the parts is a atmospheric temperature control dial which sees a lot of use and forces exerted on it as it's linked to a servo and the part hasn't failed - where as i've used "top grade" epoxys which failed on this very same part after curing for 72 hours, this adhesive bonded and cured and was ready for use within 8 hours without me needing to sand the parts and treat them with solvents.Incredible stuff!

The glue has the consistency of water and the slightest pressure on the side of the container will eject a droplet (or more) from the end of teh applicator nozzle. The applicator nozzle is what puts this head and shoulders above the rest of the polystyrene glues. It's a hollow metal needle with a blunt end. It is also relatively long so you can control the application of the glue to a very fine degree - but you do need to master how much pressure to use. it is very easy, until you get used to it, to apply far too much, so practice on scrap before using it.Highly recommended, though one small caveat. The applicator tends to glue itself to the cap, so when you remove the cap, you remove the applicator from the glue bottle and there is very little of the applicator to get a purchase on to work it out of the cap.

Bit pricey

does what it says

helped and made my models easier to assemble

Compré este pegamento de Revell para montar un book nook y la verdad es que ha cumplido de sobra 👌La boquilla con cánula fina es lo mejor que tiene. Echa justo la cantidad que necesitas, ni una gota de más, así que te olvidas de esos chorretones que dejan otros pegamentos y que arruinan el acabado de la maqueta. En poco tiempo ya notas que ha empezado a agarrar, aunque conviene sujetar bien la pieza unos segundos mientras hace su trabajo.No mancha. aplicándolo con cuidado no deja restos ni marcas brillantes en el plástico, algo que en un proyecto tan detallado como un book nook se agradece muchísimo.Una vez seco, las piezas quedan bien firmes. Eso sí, hay que tener paciencia y dejar que agarre del todo antes de manipular la pieza, si no puede moverse un poco.Como consejo, guardadlo con la aguja hacia arriba después de usarlo, porque si no se puede resecar en la punta y luego cuesta que salga bien el producto.

Dobra jakosc i ogolnie OK

キャップの黄色い部分が、割れやすいです。ノズルからの出が悪いです。

Top in gebruik