YOSH Magnetic Phone Holder for Car Dashboard Leather Wrapped Car Phone Cradle Mount for iPhone 11 X XR XS 8 7 6 6s Plus Samsung Galaxy S20 S10 S9 Huawei P30 P20 Moto Google Oneplus, etc.

This car mount is amazing, I always wait a few months before leaving my review so here it is:This mount is dead easy to install (literally find where you want it placed and peel and stick!) the design, sleek, sturdy and bold - I mean bold because it’s just an awesome product that has served me well for months and months and the design has a nice leather feel and look to it which I have never seen on another mount like this before.The back plate forYour phone is also great because it’s not too big or small and it’s a great colour too - the Yosh logo also adds a nice little touch too as it’s almost embossed on and looks fantastic.In terms of strength of the mount, so when I bought this I had an iPhone XS Max which is a pretty big phone and let me tell you the mount never budged at all and stated in place throughout every journey. I then changed phones - don’t worry you get a spare mount plate - to an iPhone 12 and again the mount holds perfectly each time and is just as strong as the day I installed it.I also found this mount extra handy as a cable holder for my phone charger if I ever needed too.I have used so many different types of car mounts and even magnetic mounts in my driving experience and I can honestly say this has been the best phone mount I’ve ever purchased. I’d defiantly be looking at more Yosh! Products in the future.Let me summarise for you:Pros -Design - 10/10Value for money - 10/10Reliability - 10/10Strength- 10/10Customer service - 10/10Cons - didn’t see the option of other colours which I can imagine might put some Customers off/would be nice to match other interior colour schemes - however black is fantastic for me.Thanks for reading my review, if you’re looking for a new car mount I would honestly recommend this 100%

Sadly mine has arrived damaged before I got it out of the box (see photo). One of the anodised surfaces has been scratched. Given the product comes sealed in a plastic box suspended away from the edges of the plastic casing I can only imagine mine has been neglected during the QA process if there is one. Very frustrating.On the other hand the product seems to perform well and I will update in more depth in the future however, the QA and packaging for the product leaves much room for improvement.So far it’s seems the product is capable of holding the weight of an iPhone 8 Plus (205g) whilst resisting expect forces exerted on a vehicle transferred to the cabin of a vehicle on Swiss cheese, neglected British roads. I will test with a Sony z3 tablet soon (270g) and report back.I would say there is only just enough resistance in the ball joint to prevent unexpected slippage with my iPhone 8 Plus (this will obviously not affect you if you are using a much lighter phone). More resistance would be better or alternatively mechanical notches or a tightening system of sorts as a large phone and significant bump in the road may cause this ball joint to eventually slip.The contact patch for the adhesive is tiny 24mm in diameter and the contact surface for the magnetic face is adequately soft grippy rubber and 30mm in diameter. The adhesive is adequate but only time will tell if it holds up through temperature changes. The thickness of the sponge below this adhesive is thin around 1mm deep before the metal body of the base will impact the surface it is being attached to. This will affect you if you are attaching it to a surface which is curved.The two metal disks supplied are thin sheet metal, sturdy, approximately 0.25mm in thickness and 40mm in diameter. An additional adhesive is supplied (both 3M), two thin plastic covers come in the packaging and finally a single alcohol preparation pad (another would be nice).Finally, the remaining surfaces of the holder have been finished in a ‘faux leather’ texture which appeals to me and gives a nice aesthetic. They are somewhat soft touch.Overall I am happy with the performance however, this is completely overshadowed by the damage to my item before I even got it out of the packaging. I would have expected the anodised black metal areas of this item to be better protected or alternatively a higher quality anodising process to have been used or a lacquer for hardening.Be warned! If you purchase this item you may find the QA for the surface finish may not be up to the standards you expect it to be (if you are so inclined to be pedantic about such things).5*(Update 21/04/18)I wanted to update this review as YOSH took the effort to get in contact following the concerns in my review. In my view customer service counts for a lot and I appreciate their efforts to sort out my scratched unit.Thanks very much YOSH and I’ve updated my start count to reflect their much appreciated intervention.

Easy enough to install although the thin metal plate that attaches onto your phone case will mean that the case no longer sits on a flat surface without being extremely easy to spin in circles. I can get over this as it is a cheap product. It is also quite well manufactured in terms of build quality. However, there is at least one major flaw - in order to remove your phone from the holder, the force required is significantly greater than what the adhesive can tolerate. It is inevitable that sooner or later the adhesive will fail resulting in the holder failing to meet its specified purpose. Do not waste your money. 6 weeks after installation and my phone falls on to the floor. Not fit for purpose!

I've had two of these and the first I used in my MX-5, as space was tight and most surfaces uneven, but this worked very well and i have absolutely no complaints.Because of this, I bought another for my S2000 as it has the same tightness for mounting a phone and the first one worked well.Well the second time I made the mistake of using the clear circle pad on dash as a surface for the mount to stick onto and grip, but the circle was so poor it just slid off the dash. The mount then bonded to this rubbish clear circle... The adhesive on the bottom of the mount is one use, so was useless after this...I've since ordered the replacement pads that Yosh sell, but they're almost the same price as the mount itself, which is disappointing.Moral of the story, don't use the clear circle things, as they make a great product useless.

Top discret

Snel geleverd, en doet wat het moet doen.Een prima produkt

Se come si dice il buongiorno si vede dal mattino, basta dare un’occhiata alla confezione del prodotto per farci un’idea del contenuto.Appena arrivato mi sono meravigliato delle dimensioni estremamente ridotte dello stesso. Quando l’ho estratto dalla graziosa scatolina in plastica trasparente la mia sorpresa è cresciuta ancora nel constatare quanto fosse piccolo il prodotto. Una volta preso in mano mi sono poi reso conto della grande robustezza dello stesso: tutto metallo con il piano di appoggio principale in una bella finitura in pelle molto gradevole al tatto. La stessa finitura in pelle la notiamo anche nella parte conica del supporto, molto ben fatto insomma.Ne ho usati diversi di questi dispositivi: da mettere nella feritoia del CD, nelle feritoie delle ventole di raffreddamento. Inutile, hanno fatto tutti una brutta fine e tutti erano sempre poco stabili, spesso lo smartphone finiva per vibrare al punto da diventare invisibile, a volte si staccava proprio.Alla fine mi sono un po’ stufato ed ho deciso di prenderne uno proprio da incollare. In passato ero un po’ restio ad applicare un accessorio in maniera definitiva, ma alla fine, riflettendoci mi sono reso conto che non c’è niente di male, anzi, le moderne vetture dovrebbero avere già di serie un supporto simile.La tipologia magnetica per me è da un pezzo quella da preferire. Ho avuto anche quelli che si chiudevano, quelli a molla ecc. …….tutti durati pochissimo, senza parlare poi della scomodità ogni volta per infilarci lo smartphone. Con questo tipo entri in macchina e lo butti sul supporto in mezzo secondo. Una cosa molto comoda, anche se non dovete usarlo per navigare, risulta sempre comodo anche se vi arriva una telefonata, in un attimo rispondete e mettete il vivavoce, se invece lo tenete in tasca o in borsetta o non rispondete o rischiate un incidente.Il punto cruciale è trovare il giusto punto dove applicarlo. Io ho preferito metterlo direttamente sul cruscotto.Nella scatola trovate:1. il supporto;2. due placche metalliche nere, vanno incollate sulla custodia dello smatphone o al suo interno direttamente sul telefono, in questo caso ci sono due adesivi trasparenti (i due foglietti bianchi rotondi), vanno applicati sullo smartphone e sopra di questi vanno applicate poi le placchette metalliche nere (servono ad evitare di graffiare il retro dello smartphone); volendo potete applicare la placchetta anche sul retro della custodia (all'interno per intenderci), tenete presente che in questo caso, prima applicate la placchetta nera nella custodia e poi sopra ci mettere l’adesivo trasparente, ricordate che l’adesivo serve per proteggere il telefono dalla placchetta nera;3. i due adesivi trasparenti di cui sopra;4. una salviettina imbevuta di alcool, serve per pulire il cruscotto prima di applicare l’adesivo (aspettate che si asciugi bene, meglio se usate un fazzolettino di carta per asciugare bene dopo l'alcool);5. un piccolo adesivo di riserva da applicare sotto il supporto se decidete di cambiare posizione e quindi doverlo riattaccare.Io ho prima attaccato il supporto al telefono e poi ho cercato una posizione in modo tale che uno dei lati lunghi del telefono poggiasse sul cruscotto in modo da evitare che in caso di buche o scossoni il peso del telefono non gravasse tutto sull’adesivo. Tenete presente che lo uso con un Note 4, non proprio un peso piuma.Dopo avere applicato il supporto, lasciatelo in posizione per circa 24 ore dopo averlo installato. Potrete controllare quando è ben fissato semplicemente appoggiandoci sopra il telefono e scuotendolo delicatamente.Comunque io ho applicato la placchetta dietro la custodia del Samsung Note 4 e riesce a tenerlo perfettamente.Un gran bel prodotto, niente da dire, veramente molto funzionale, senz'altro superiore alle altre tipologie.

Se trata de un soporte que es fijo, una vez lo pegas al salpicadero del coche (dónde más te convenga) ahí se queda. Pero la verdad que es muy discreto, y muy estético.Puedes orientar la cabeza del soporte hacia dónde más te convenga, y el móvil puedes ponerlo de forma horizontal, vertical, en diagonal.. como prefieras y de manera muy rápida. Entras al coche, y los imanes se juntas! 2 segundos!Sinceramente, he de decir que compré este producto pensando que no sería lo que yo buscaba, teniendo en cuenta que tendría que pegar un imán al móvil para que se pegue al soporte, y todo lo contrario!! El imán puedes pegarlo a la parte interior de la funda de tu móvil, por lo que no se ve y no tienes que pegar nada en el teléfono que pueda ser antiestético. Una opción, si no usas funda de móvil, es tenerla en el coche con el imán pegado a ella y ponérsela al móvil sólo cuando necesites usar el soporte de móvil. Por lo general muy buen producto! Los imanes son 3M creo que muy duraderos!

Ich habe mit meine Rezension etwas gewartet aber ich wollte das Produkt erst selbst etwas ausprobieren bevor ich meine Meinung dazu schreibe. Nach fast drei Monaten bin ich wirklich begeistert. Der Halter ist klein und unauffällig, klebt bombenfest auf der Armatur obwohl die Fläche von dem Fuss nicht gross ist und die Autoarmatur auch nicht glatt. Vor kurzen habe ich meine Handy-Schale ausgetauscht und obwohl der Cover etwas dicker ist als das Alte und ich das kleine Blech zwischen Handrückwand und die Schutzhölle geklebt habe, hält der Halter immer noch sehr gut. Ich bin jetzt nur gespannt wie wird der Halter in Sommer halten, bis jetzt gebe ich klare Kaufempfehlung.