MALAYAS14pcs 1/4 Inch Shank Power Nut Driver Bit Set, Socket Bit Adapter for Quicker Change Chuck Adapter, Electric Hand Drill, Screwdriver

A set of 14 1/4-inch hex nut drivers in common sizes, half of which are Imperial and the remainder metric. "Hakkain Drill Power Nut Driver Bit Set 1/4 inch Hex Shank Tool Drill Bit Adaptor" are perfectly usable while not claiming to meet any specific quality standard. However, when properly used in the correct size, it is very unlikely that damage will be done to a nut or nut-headed bolt.Not supplied cased but in a simple clip holder with one side dedicated to each type. The holder is labelled with the various bits in the correct size sequence and it has a loop to thread onto a trouser or work belt should you choose.Reasonably-priced, it is to partly replace a larger set from which several pieces have apparently been lost over time. Not yet used 'in anger', certain of the sizes mated perfectly with the nuts found to be used on some hardware with almost zero play, probably no more or any worse than may be found with full-priced alternatives. As they are normally less used than several screwdriver hex bits, paying a higher price was not considered a real option.

Hane not had a chance to evaluate it properly

The Hakkin 14 piece Power Nut Driver Bit set is a handy little addition to your toolbox, and make removing and tightening nuts a breeze.The sockets come fitted in a nice little holder to keep them all together and also separate the sockets into imperial and metric sizes. Each bit is made from Chrome Vanadium Steel (as are most tools) making them nice and strong.Metric Sizes: 5mm, 5.5mm, 6mm, 7mm, 8mm, 10mm, 12mm.Imperial Sizes: 3/16", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16".Each bit has a hexagon shaped shank with a diameter of 6.35mm and a length of approximately 22mm, which will fit any cordless screwdriver, air drill or manual screwdriver handle.***** Conclusion *****This little socket set is great value for money and gives you a good range of different sized sockets.I really like the little holder that is included, as it keeps all of the pieces together nicely, although the sockets can a bit tough to remove (this will probably ease with use).The bits seem to be of pretty good quality and are perfect for those small jobs around the home.

I haven't used these "in anger" yet, just light work, but they appear very well made and should do the jobplease not they are really BOLT drivers, not nut drivers, as they have no hollow stem for a bolt thread to slide up such as in a pipe wrench/ tube spanner.Hence I've marked them down 1* to a 4* rating due to the misleading description.they have a nice 1/4" hex shank, so will fit smaller impact drivers, or a larger impact driver with adaptor, or a drill driver.overall a good purchase

Handy to have, makes undoing nuts with a drill easy. Unlike others that have commented that these are loose and fall out, mine were so tight I had to use pliers to get the 10mm bit out !!

Reasonable quality. The sockets are not very deep so could be a problem if you have access thread coming through the nut. Iuse them for remove bolts on electrical panels so suits this perfectly!

Arrived on time and did the job I needed to do. A great little set, very well made and ideal for storing away somewhere if you don't have a lot of space. Also, the sockets fit really snugly in the holder so no risk of them slipping out.

nothing to complain about other than the case could be designed better