Serious Glue 33g - High Strength - Waterproof

Fantastic glue stuck the ear of my stone rabbit in seconds.

I have a pair of 25 year old but much-loved walking boots. They fit as comfortably as carpet slippers and they've taken me up Ben Nevis, Scafell Pike, Snowdon, Helvellyn, and many less arduous walks. Sadly last year the Vibram soles started separating from the leather uppers. I tried all kinds of adhesives but none worked. I took them to an old-fashioned cobbler who tried to glue them but he warned me his repair probably wouldn't last and he was right, it didn't. As a last resort I tried Evo Stick Serious Glue and nine months later after numerous walks, often through puddles or wet grass, the soles are still attached and my boots have a new lease of life. I'm delighted. I agree with other reviewers that the tube and cap could be better designed. After opening the tube for the first time, and despite trying to clean the nozzle and cap well, the cap gets glued to the tube and you need pliers to remove it again. Nevertheless if you want a really strong, waterproof glue this is the one to try.

This glue works really well. Unfortunately, even with the lid screwed down tight, it does have a tendency to set inside the tube (once the tube has been opened). Make sure to clean any residue off the end of the nozzle before screwing down the cap, and maybe wrap some electrical tape around to make a really good air-tight seal. Also, be careful when using the cap to pierce the foil covering the end of the tube. I've also used it for sticking a whole range of other things, some related to the same task, and it is amazing how little one actually needs. It also doesn't seem too bothered by the surfaces being stuck together as long as they are not too dirty or oily/greasy.

Used on a wooden chair and it seems perfect (as I look at it the next day).

This glue works really well. Unfortunately, even with the lid screwed down tight, it does have a tendency to set inside the tube once the tube has been opened. Make sure to clean the residue off the end of the nozzle before screwing down the cap, and maybe wrap some electrical tape around to make a really good air-tight seal. Also, be careful when using the cap to pierce the foil covering the end of the tube; I managed to get a bit of foil in the nozzle that prevented the glue from coming out until I managed to dislodge it with a nail.

Very good

This is the strongest glue I have ever owned. Even used previous to repair a Disjointed boot spoiler! Strong, clear, easy to use and apply. It’s my go to for home use. Don’t get it near your fingers as it will stick them!

I never really got to test this glue over a long period as it soon hardened inside the tube. This seems to be a problem with many adhesives. Perhaps two smaller tubes instead of one larger one might have helped? However, initially whilst it was working, it did a great job on repairing trainers.

This stuff is the best! I have some bedazzled shoes and sometimes the stones fall off and need to be replaced. For years I have tried every type of glue and nothing works. I bought this and it works! It is amazing.

We've purchased very expensive underwater glues in the past to refix the filter cover in our swimspa, but they never worked for too long. This glue worked a treat and at a fraction of the cost of specialist pool glue. Very happy and will purchase again if required.

Outstanding!

The product worked as specified.

It's good glue and is a strong adhesive but glue gets stuck and consistently clogs the nozzle so I cannot use it without pushing a needle through to clean it. I used this for film camera door seals which requires a more fine nozzle so the clogs make it difficult to use without cleaning every time. If you have bigger applications where you can unscrew the nozzle from the tube itself it'll probably work fine.