Everbuild Stick2 Superglue High Viscosity – Suitable for DIY & Professional projects – Industrial Grade – High Strength – Rapid Setting – Clear – 20g

Great super glue. I needed a gel as the liquid is too runny for my application. Easy to apply and strong adhesion. Dries quickly. The bottle is quite good too. Once done, I wipe the end with tissue and blow a few times down the tube. So far this has kept it from clogging.

🔎The Everbuild HV50-EBD Stick 2 Industrial Grade High Viscosity Superglue, Clear, 50 g is a slow bonding super glue, that gives you around 15-30 seconds to adjust the two parts.🧡This is a glue I use almost every day.I bought it to make a popsicle 2 bridges for my two sons' school STEM project.It performed excellently - the bridges are very strong after the glue is cured, and when you make a mistake, you have a little bit of time to reposition two elements.I used around half of the bottle for the 2 bridges, and I'm using it for small repairs around the house since.Even today my son broke his remote control for an RC car. I managed to fix it quickly using the Everbuild glue.This bottle lasts for a very long time and is very cost-effective.👎None.💲An excellent value for money. Great product, super strong, and helps to fix many things around the house.

The glue itself is great. HV glue is very handy for a tiny blob in between two surfaces. A bit of accelerator if you really need to. HOWEVER, I have never gotten to the bottom of a bottle of this stuff. I have 4 half-full bottles on my shelf, each with a wrecked nozzle. It comes with a fine-ish tipped nozzle with makes the repair easier, but regularly blocked up with dried glue. I have a 1mm drill bit to ream it out before each use, but eventually the nozzle becomes unusable, with about half the contents still remaining.

Some superglues dont always work that well, this one takes a while to bound, but, once its bonded it is solid! An thankfully its in a really nice, big, container! If, like me, you use a lot of superglue, its fantastic to have such a big bottle for a change! The nozzle is easy to use, flows perfectly, an cap screws back on so cant accidently be knocked off, its a good design.

Amazing superglue

The high viscosity makes it more manageable than the thin cyanoacrylate.That is a very respectable amount of glue for the money (at the time of review) and you can get the most from it (I had my last one for years) by wiping off the nozzle when you have finished, the best thing to wipe it off with is either acetone or an acetone based nail varnish remover.If you have any, some mineral oil or beeswax wiped on the thread of the cap will extend the life even further.It's an excellent product worth looking after.

not to be messed with, this stuff is proper , if you glue something in place and hold for at least 30 seconds , its a good time frame to truly stick...just don't get your fingers stuck like i did......

Glue excellent but container bad as applicator gets stuck to top and pulls nozzle out of bottle so pored from bottle then to use rgds Ray