TP-Link AC750 Dual Band Wi-Fi Travel Router (Support Router Mode/Hotspot Mode/Range Extender Mode/Client Mode/Access Point Mode, 1 USB 2.0 Port/1 Micro USB Port, 1 WPS Button, UK Plug (TL-WR902AC))

Bought this for my mum to use during her long term stay in hospital at the moment. The 'Patient Wifi' doesn’t quite reach her room, so I bought this to extend the wifi so she can access the internet on her phone and tablet.It’s brilliant! The beauty with this Router - and the primary reason I bought it - so it can access captive portals on the web browser in order to get online. I initially tried using my own home-use wifi repeater, but for whatever reason, it can’t access the captive portals on public wifi networks, but the TP Link Travel Router does!Once the parameters of the Travel Router are set up on the TP Link Settings Page ( http://192.168.0.1/ ), it’s a brilliant wee box of tricks and works super on public wifi points.I left a sticky note on my Router, so if it’s discovered by patients/ staff, they know what it is and who it belongs to.Mum now has superb internet access and can communicate with family online etc as much as she wants now. Happy Bunny. Recommend.-------UPDATE 27th April 2022Router still going strong 👍 Bought a second one for myself to use when travelling and tried out the different functions (AP, client, Repeater). They all do their job well once you set up the correct parameters on the settings page through your browser.TP Link makes it easy for any person to use, whether you're super tech savvy or a luddite. The settings interface guides you through setting up your router, step by step, or of you're an advanced user, you can set it up manually.All the information you need about the router is there on the screen.

For its size this little travel WiFi router is great. It support both 2.4G and 5G WiFi bands and different usage scenarios which are easy to switch between using a physical button on the side of the device.The device is tiny for what it can do and low power enough that it could be run from a reasonable sized power bank instead of the supplied mains AC adapter.Configuration in router mode (with the switch set to Share ETH) was a breeze using TP-Link's Tether app. In the other modes you have to resort to using the admin console on a web browser which is a shame as being able to do it all from Tether would simplify things. Also your configuration from router mode isn't retained when switching modes and when you switch back any custom WiFi network changes mat be undone by switching modes and using the admin console in the web browser session. The device only supports a single web admin session too, so changing WiFi settings means you then have to power cycle the device to be able to log in to the admin console again.The device also supports a guest WiFi network, so you can create a private wireless network for your trusted devices on the main WiFi, and selectively share internet access with others via guest WiFi without them having access to your private network.It does NOT include any direct way of connecting to the internet itself. To do that you need an internet router you can connect to it using the wired ethernet port, or you need to buy a USB modem (aka a dongle) to plug into its USB port (i.e. with SIM slot and mobile data contract). USB modems aren't that plentiful either and most only work on 3G/4G mobile networks (I haven't found a 5G one at all at the time of writing).It can also work in shared hotspot mode, where all your devices are connected to the device and it connects to public WiFi or a mobile data WiFi router. This can significantly simplify connecting your devices up when travelling, but be aware that it may open your WiFi data to snooping if ultimately going through a public WiFi without using a VPN as well.My one real gripe about the device, and hence it losing a star, is speed. Despite saying it supports fast WiFi, my tests showed it topping out at 50Mbps on 2.4G WiFi and at 95Mbps on 5G WiFi connections. As more devices are added the speeds drop further too.

This device, TP-Link AC750 WR902AC Travel Router, does exactly what I want: a WiFi to Ethernet Bridge ONLY. When set up in "Client Mode", functioning as a WiFi to Ethernet adapter, it will not be broadcasting WiFi as a repeater. This is unlike several other TP-Link devices that combine WiFi Repeater/Extender functions with that of a WiFi to Ethernet Bridge/Adapter. On those, such as the RE450 (and all others in the series) the WiFi broadcasting (i.e. the Repeater function) cannot be turned off, which can cause interference issues that can quite severely slow down the WiFi throughput. This little Travel Router does actually work purely as a WiFi to Ethernet bridge/adapter when set to Client Mode, and thus is a perfect choice if that is all you want to do and you are doing that well within the range of the main router so you need to avoid WiFi interference/contention.This little device is providing exactly what I want: a WiFi to Ethernet Bridge with no WiFi Repeater/Extender function active. My Ethernet-only devices are now connected via this WR902AC to the home wifi network with no unnecessary wifi signals causing trouble. I have read one or two reports here of failure after a few months of constant 24/7 use, and it does get rather warm, a bit more than I think it should, so I will watch out for any issues (this one can be switched off from time to time but I need a second one which will not be - we will see). At the moment I am very happy.

Reading the confusing reviews for this device, I was unsure whether it would be any good or not. Having owned a Tripmate Nano before, I knew I wanted something better, preferably dual band and specifically, I wanted something that I could connect to a hard drive and use it aboard a minibus as a media server on long journeys, as well as for bridging WiFi and Ethernet in hotel rooms.I needn't have worried. This is miles better than a Tripmate. It is easy to setup in any of its three operating modes, has a lot of power and range for its size, plugs right into a hard drive and provides media server, file sharing, FTP and guest network functionality, works pretty seamlesly with network enabled media players, such as VLC and runs just as happily off a car cigarette lighter socket with an adaptor as it does off a phone charger.It also works as a NAT firewall and offers good security, unless you're particularly paranoid. So, really it's perfect for what I need. I have a hard drive with hundreds of movies on it and have just toured across Australia with it for two months and I can say the long drives just flew by with everyone on their tablets streaming the movies of their choice. I'm very glad I took a chance on it.

Took me 3 hrs to configure as a WiFi repeater. Instructions are misleading.The correct ip address is 192.168.0.1 for the tplink repeater.The physical switch setting that works is share hot-spot.Going into the admin menu for setup, select REPEATER and activate your listed existing router plus enter existing password and save.There might be some other steps I can't remember.Hope this saves you a few hours setup time.I gave it one star to make it easier to find my feedback.Actually works quite well as a repeater once configured correctly.

Bought this for the cruise around the med. Looked on line and found most users, used this unit.Easy to set up but if you’re not technical it could be slightly trying, but you will get there.Used my iPad and PC during the set up as this made it easier. Then paired the TP unit it with my phone.Got on the ship for my hols. Went to the settings on the to-link and entered the ship wifi and your password. . Note pair your phone first with the ships wifi before you pair your to unit to make sure you’ve got a connection.Also note I did pay for one device before I got on the ship.Please read the instructions lads before starting.

I have had this for a few weeks and have by no means tested everything but I will update this review as I go along.The model I received was the TL-WR902AC(EU) Ver 1.0 (with UK plug on the mains adapter).There are other versions out there (like EU ver 3 and US).Also, this model has a recent firmware update available from the tp-link UK website which I have applied.The micro USB socket for the power is set back in the unit and I have found some USB cables have a B plug that isn't quite long enough to stay connected. YMMVThe first thing to do is check that the built in Wifi networks have a password.Set the switch to ETH and switch it on. Don't plug it into a network.When the unit is ready, use a tablet or laptop to connect to the WR902 wifi. If it doesn't ask for a wifi password, visit the WR902 admin page tplinkwifi.net and login. Check the Wifi settings and make sure both the 2.4G and 5G networks have a secure password set.I didn't do this and just plugged it into the home network.The WR902 promptly created 2 completely open unprotected Wifi access points. :( :(The wifi range of the WR902 is surprisingly good even though it has no external aerial. However, the unit has to be powered externally (there are no batteries) although it can be powered from a USB port (on your laptop, or car socket for example) so you don't require a mains socket. There was no manual provided. Just a quick guide. I did find a bigger manual on the USA TP-Link website (but not on the UK one). The documentation is not good and neither is the support website. If things don't work as expected, you can spend a lot of time tinkering trying to make it work.Test scenarios:Share ETH switch setting:Wifi access to the internet via an existing (wired) network. Plug the WR902 into a handy RJ45 ethernet port on the network and switch on. After a couple of minutes the WR902 should provide 2.4G and 5G wifi access to the internet via the network. This works flawlessly. As long as the WR902 can get an IP address from the network there is no more to do. If the local network requires the WR902 to have a fixed IP address, you can use the WR902 admin page to enter it.Wifi access to internet via a 3G/4G mobile network. Instead of plugging the WR902 into an existing network, you can plug in a USB mobile dongle. However, the WR902 is very choosy about which USB mobile dongles it will talk to. It doesn't recognise my Vodafone K5160 4G dongle and it doesn't like my old K3520 3G dongle either. Luckily it likes a K4201 3G dongle. The WR902 takes several minutes to recognise and connect to the internet via the dongle. You will probably have to do some configuration via the WR902 admin pages to make it a plug and play process but it can be done.Share Hotspot switch setting:Wifi access to internet via a Wifi network. This seems a bit strange. Why would you use the WR902 to connect to a Wifi network? You can just connect your device directly. There are a couple of situations. 1) The hotel wifi only works in one part of the room but you want wifi in the whole room. Place the WR902 where it can connect to the hotel wifi and share the internet around the whole room. 2) The hotel wifi only works with one device. Use the WR902 as the device. it will share the connection with all your devices.Start up the WR902. After a couple of minutes you will be able to connect to the WR902 Wifi and log in to the admin page (URL = tplinkwifi.net). Choose Quick Connect. You can get the WR902 to scan the local wifi networks and choose the one to connect to. Enter the wifi password and continue. The WR902 will reboot and after a few minutes, the internet will be available. The good news is the WR902 remembers the last wifi network you connected to so if you are staying in the same hotel for a while, subsequent use is plug and play.Note: With both of the above modes, the WR902 creates its own LAN which it connects to the internet. Devices using the WR902 can network with each other, but are isolated from the LAN that the WR902 uses to connect to the internet. If you want to use the WR902 to extend your existing LAN, use the third switch position AP/Rng Ext/Client.More later.

I have been using wired connections to my router, all of it via powerline adapters, my wife finally cracked and told me to clear things up around the router which sits in our hall. First project connect two NAS devices sitting on my desktop to my router over wifi. I chose this because it was compact and together with a small 5 port Ethernet hub my research indicated this would be a good solution. Day 2 after a simple setup, read the instructions, all working well, who knows how long this will work as it is sold as a travel device, however my experience with TP-link is they make reliable devices. Four stars only because it has not had a test of time.

This gadget as its described!, perfect!

Utilisé de manière efficace pour réaliser une passerelle internet entre un réseau "guest" d'une maison de retraite et un cadre image dont l'interface ne permettait pas une connexion au réseau "guest". Si l'appareil fait le job, l'application dédiée ne m'a été d'aucun secours. J'ai dû me faire aider par l'IA Gemini pour réussir à configurer la connexion (et par une tablette Android)

Macht was es soll.