Happy Hot Tubs WET or DRY Swimming Pool Liner Vinyl Repair Kit Inflatable Tub Patch Paddling

Used it to patch over the mother of all tears on the top of an inflatable hot tub, had tried repair patches but they blew straight out. However, This did exactly what it said as it 'welds' or bonds the plastic onto the surface.

We tried EVERYTHING to repair the puncture on our lazy spa and this product was the only thing that did the trick! Dont waste your time with the patches that come with the tub or the glue recommendations in the instructions as they just dont work! This stuff works, a little tricky to apply as the edges of your patch start to curl up after you apply the adhesive but if you take your time and work the edges down its perfect. We even added a little extra glue to some of the edges after too and it made it even better, firm but flexible finish! Honestly look no further and for £13 and the amount of viynl you get in the kit it's an absolute bargain

Annoyingly, my husband put a massive 4" gash in our LayZ Spa hot tub when he was carrying it to the garage to put it away for the winter. I was heartbroken and had read reviews that several people had tried the LayZSpa repair kits and they were rubbish... I was gutted and thought we would have to chuck the hot tub. Eventually managed to find this and all I can say is, Wow! It was a bit tricky trying to get the glue onto the patch as it shrivels up a bit (must be the sticking properties of the glue) but once on the hot tub it stuck like a dream! It is one long piece of plastic so you can cut it to size which is great as opposed to set smaller pieces. Our hot tub is reinstated once again and we are over the moon!

This has enough vinyl and glue to support having freddy krueger stay on your air bed and play in your blow-up pool. The vinyl patch is far longer than it looks in the photos, I only used a tiny amount.Given the instructions and how fast it said the glue would set, I put tons of glue on to make sure it wouldnt dry out too fast. I accidentally cut a fairly nice air bed when cutting up a box next to it, and had a guest coming to stay in a few days so I had to get it fixed. Most kits i've seen on here haven't looked like they'd be appropriate to fix much of anything, this looked like a real patch kit and it really is.I applied a patch far larger than the cut with liberal amounts of glue, it covered the hole well and the vast quantity of glue I used made the patch wrinkle a bit, but that's my fault. I found that using the applicator with a bit of extra glue and just wiping it from the bed over the edge of the patch helped squeeze a bit of glue under the edge of the patch and create a little bit of a fillet on the edge, which made it so the corners/edges couldnt catch on anything and lift.

Had 3 small puncture holes about the size of a match head on the bottom of my 12 foot diameter Intex above ground pool. Prob caused by small stones pushing up from the lawn it’s sited on.Follow the instructions to use a generous amount of the glue, fold the patch in on itself and don’t unfold your glued patch under the water until you are ready to precisely stick the patch over the hole. Be patient but work quickly and don’t expect the patch to grab hold of the surface you are trying to repair, as you are fighting against the water wanting to prevent the patch from sticking, instead keep pressing on the patch with fingers and thumb while the glue reacts with the pool vinyl pressing from the centre to the edges expelling both air and excess glue . You can do this manoeuvre for a couple of minutes for the best results. Ps I cut my patches about the size of a 50 pence piece to repair my 3 small holes and I cut the patches into a circle so there were no corners to turn up.

Great product, repaired a 2cm hole in the outer layer of our lay z spa just fine.Left for 24 hours with a sand bag on top of it and re-inflated with no problems. Been up a week now and hasn’t deflated at all.

Did everything as instructed. Rounded corners. Lots of glue. Push out air bubbles. However what I got was peeling from the edges despite rounded corners. A mess due to the liberal application as required. Lots of air bubbles. I can see the bits that have stuck down have stuck fast and well but the air bubbles and peeling edges might mean it all comes apart or wafer still escapes. I got on much better with the little pre glued patches that came with the pool. I wouldn’t say I dint recommend it because I think if you are doing small patches then it works better. I did one small patch and got less curling. I’m now awaiting ore adhesive patches.

So far this is sticking on a strimmed intex pool. How on Earth they didn’t see a bright blue 8’ pool is beyond me. Tried lots of other fixes but nothing worked. The amazing thing about this is that water activates the glue so you don’t have to empty your pool before fixing. The vinyl is really thick and you just cut a patch the size you need. It’s been on a couple of days now and seems to have made a very secure seal. I’m really impressed with this product and would recommended trying this before wasting your money on other cheap fixes. Hopefully it’s fixed my pool, I will update this if not