JETech Full Coverage Screen Protector for iPhone 14 Pro 6.1-Inch, Black Edge Tempered Glass Film with Easy Installation Tool, Case-Friendly, HD Clear, 3-Pack

To start, I was super impressed with the packaging of these screen protectors. Each screen protector had a protective film that was relatively stiff which prevented any bending during shipment, so all three arrived to me in one piece. The entire package was also well packed and sealed to prevent any items from moving around too much as well, so I am very impressed with the packaging.Sticking the protector was pretty easy thanks to the tool they included to help with that. I did end up placing the screen protector on a little off centered, but then again, I’m no pro at putting on screen protectors lol. I did get a few bubbles when I placed the protector on my phone, but that was due it being off centered and catching on the edge of the installation tool. I was able to remove most of the bubbles just by rubbing them out with the microfiber cloth.Overall, the screen protector works perfectly fine. It’s highly responsive and pretty fingerprint proof. Of course if my hands are dirty or greasy, some of it will stick to the screen protector, but it’s super easy to clean off with alcohol and the microfiber cloth. These protectors are also very scratch resistant; I tested this with a pair of scissors with the screen protector on my phone and not a scratch was made (Don’t copy me though haha).I would DEFINITELY recommend these screen protectors! Super durable, easy to install, and easy to clean, and the package comes with three, so you have spares if you need them. I am very happy with this purchase!

I am a hard-core iPhone mini user and it has reinvigorated my enjoyment of phones. I returned my iPhone 12 Pro for it and now, in 2023, had the phone recently refurbished by Apple at their store to replace the battery and fix some cosmetic flaws, so I am keeping this for a long time, or until Apple releases a new mini phone. I am saying this because I have been through a lot of protectors with it for several years now.I have a lot of experience with screen protectors in general, back from the film-style early kinds that were horrible and rainbow-y, to synthetic or “bio” plastic sheets, to tempered glass. All that my friends and family all depend on me to select and install protectors, so I have additional experience with larger phone protectors. I hate when the screen is tacky and your finger gets stuck, if the oleophobic coating is not up to par and it always look dirty, if there are specks in the material, if there is ANY rainbowing or color-distortion so it does not look just like the bare screen, if there are uncovered cutout areas on it by the mic/camera/sensors, or if the edge gap is too large, edge is too sharp that you can feel it, or otherwise if the edge is conspicuously visible when installed. You can probably tell I’m a picky OCD person. The best one I found previously is TETHYS. This one has had NONE of the complaints above and makes the phone a joy to use. Another close one is amFilm, but I think that one had sharper edges, if I am not mistaken.I wasn’t going to try buying this JETech brand, which I had no previous experience with, just to trial and error to rule out those flaws mentioned above. However, another reviewer on this product page mentioned that the same factory that produces this makes the protectors for TETHYS. Note: none of these “brands” actually make their own products. It is some overseas factory that makes the product, then sells it for rebranding. Most products online are like this now, so it is common to have multiple brands selling the exact same product with just different names and packaging. It’s a bit misleading, but how things are done now. So, I gave the JETech a go. The JETech is PERFECT. It is super smooth, completely transparent with no color rainbowing, has an effective oleophobic coating that is forgiving and needs less cleaning, has no gaps by the sensors, goes almost to the edge with an apple silicone or silicone-style case, and the edge is nearly invisible when installed. It checks all the boxes.Installation was very easy with the provided guide frame. You clean the phone with provided wipes and the polishing cloth, install the guide frame by pushing down around the top edge of the phone, pick up any dust particles on your screen with the dust stickers, then, holding the protector face up, pull the sticky film off (face down so that falling dust in the air doesn’t get on the sticky side!!), and pretty quickly set it down inside the guide frame, before dust can fall onto the cleaned screen. You run your finger across the center of the screen, the long way, to start the adhesion, remove the frame, and with the wipe, squeegee any air bubbles out. I clean the top protector surface while this is happening, so that I can see if there is any dust under the protector. If there is, you can still lift up a protector edge with your nail and use a dust sticker to remove any trapped particle. This last part isn’t always necessary, but can save a throw-away install, if you do get dust under there. Since this is a set, you do have the ability to toss one and try again. If you scrape the sticky side with your nail if you do lift it, you may scrape the adhesive off and have a non-adhering corner. If this happens, the protector needs to be replaced to work properly. You may need rub out smaller air bubbles, which sometimes takes a while, but this is how it is for any screen protector. If you do see a dust particle inside any air bubbles, they won’t go away and you will have to lift up the corner and try to remove the dust.I hope this helps and if you need one for your iPhone mini in 2023 or later, or this brand for another phone model, try this one!

These are by far the best screen protectors I have ever ordered. Once I found these, I continue to use them for all of my phones. They installation process is excellent with the applicator they provide. The protector sticks very well covers the screen well and looks super nice. There are no issues with using the phone with the protector on it even though the protector is glass. It looks really nice! I highly recommend them!

I usually wrap my iPhones up in the most rugged, protective case I can afford, and I carry my phone on my belt. However, my previous phone case had a plastic screen protector, and months of wear and tear made the selfie camera be unable to read my face, and the mounting scratches were not only distracting but beginning to make it hard to operate the touch screen.So I bought a silicone case that covers the back and sides if my iPhone 12 mini, and got these glass screen protectors.Pro: The transparency and clarity of the screen protector are perfect, and it feels like a new phone to me. The smaller size without the bulky case is also a nice thing. And the first one did its job, sacrificing itself to save the touch-screen underneath (see below).Con: The installation process is a little finicky, and it takes practice to do it without getting distracting bubbles that won't go away. Then, the very first day I used the combination case and protector, my phone fell a very short distance onto gravel-littered pavement and the protector cracked severely. I worried about the touch screen, but when I got home and peeled off the cracked protector, no damage at all. So this is more of a mixed bag than a Con, I guess.Anyway, selling them in a 3-pack is a great idea, and I haven't dropped it since, so I have a backup. And I've order a better belt case to avoid accidental drops in the future, so, fingers crossed. Final verdict: well worth the money and the learning curve for installation.

Superb product. Very easy to work with/install.Highly recommend this product. Saved my phone many times over. Make sure you have a good case. I use a the case type that has a soft rubber, and hard plastic, with raised edge on screen edges.This review is unsolicited by the seller. I’m honest about this review from a regular consumer’s point of view.

Fits perfect. Great quality. Very easy to instal