WeraKraftform Kompakt 40 Bitholding Screwdriver with bits in pouch, PH/PZ/SL, 7pc, 05059298001

This screwdriver set is at least a semi-professional tool and could easily be one used by professionals. Light to mid-weight and not over long using the provided bits, it will happily fulfill almost every task. Using the standard 1/4-inch hex bit, it has a strong magnetic catch to hold the bits firmly and they can be released by pulling the lock ring away from the handle. The provided bits are in the extended format but the shorter 30mm bits can easily be used where space is limited. Although not provided, the shorter Torx, nut drivers, and the many security bits of all shapes and sizes can therefore also be used with or without the appropriate adapter/extender.The hand grip is quite positive although not of the 'soft' variety The blue elements of the handle are not painted on but are inset and feel rubbery in texture, which would help the grip and prevent slippage. The working ends of the bits are well-formed, unlike those of many commonly-found, cheaper, oriental-made products, some of which I bought a year or so ago and are showing heavy signs of wear after relatively little use. A worn tool-tip can damage screw heads and make them difficult to screw home and remove. The freely rotating plastic ring around the release mechanism can be held in the fingers of one hand whilst the other is used to spin the tool.The kit is supplied in a nylon case secured with a full-length Velcro strip and has a large belt loop which is also held in place with Velcro. The kit is sufficiently small and light to be carried in a pocket if required.For the quality provided, this is a relatively inexpensive product and recommended.

sturdy, well designed, good quality. expected to use for life

Since buying these they have been used far more than i first thought they would be, very good for small screws (such as hinges) were power drivers are to hard and tend too be uncontrollable even with the softer torch engaged.Having said that i have been using bits in my power screwdriver (not for hard driving but for taking out those hard to reach recessed screws).The handle is 'sure' and gives a firm feel when turning your hand and pushing, some screwdrivers feel hard or due to cheap moulding and sharp in the hand and if using for a time get uncomfortable. But not this set, it's well engineered and it's become one of my 'close kit' when i'm workingThe wallet is picking up lots of dust and the Velcro has less grip and the elastic hoops are now a bit lose but i've just doubled up the bits in the hoops, but not maked down the score for this as it's the tool it's self that i use.

Wera? Don't ask, just buy! Quality and more quality. Brilliant ergonomics and ideas. As a maintenance engineer I use their tools at work and at home and I don't know any better. I am obsessed with their products. Don't ask, just buy!

Small and compact, comes in a handy pouch.

I love this set for functionality. I bought a set of these for work, and soon after the whole department had them on order.A great selection of bits and they really are rock hard in true Wera form. I use these every day in a busy, professional environment and the heads are only worn to a minimal amount. They are a perfect length for most jobs, and the Wera locking driver grips them amazingly well. I also use them in the drill driver for extra torque, and they survive this too. they get used (and occasionally abused) every day, and take it all brilliantly. Can't rate Wera bits enough.One of my favorite features, is that you can buy the replacement Wera bits - and they come in a range of different sizes. I wire a lot of mains plugs at work, so I purchased a 4.0 flat bit to fit in here to complete this task. Looks the same, and I simply replaced the lesser used large flat bit in my belt pack. They aren't a shelf item, I bought them from Rapid Electronics Online.The handle itself is brilliant. Formed to fit the hand perfectly, and the green parts are made of a rubberized grip type material. You can really grip this well and get torque where required, unlike cheap plastic handled screwdrivers.My only issue is the belt pack. After about 6 months of use, the belt look gradually came stitched. Thankfully my Mum re-machined this for me, but in a slightly different manner to the original so as to prevent this from happening again.Also, you have to be very careful when packing up and transporting:if you don't fold the bit of fabric at the end over the bits, they can fall out. Also, the elastic that holds the bits seems to stretch out after about a year, thus reducing grip. I have so far lost 2 bits out of this - bear in mind I jump in and out of vans every day and use these literally all the time. But still, it's an annoyance. So be careful out there...

Well made and can fit in your pocket.

Like most of the Wera tools I own these are simple and easy to use, grip, and get torque.Unlike most of the interchangeable tipped tools I own, the long shafts make getting into smaller gaps easy, and can be held in a power driver with ease.Generally this set feels more like standard screwdrivers with a single handle than most interchangeable head stuff I own, and this is good

Wera tools sinónimo de calidad no hay más que agregar

È un cacciavite sicuramente di ottima fattura, le punte sono perfette e il manico altrettanto, molto comodo e veloce il sistema di cambio bit di Wera, ne ho diversi e mi son sempre trovato bene

A simple set with the basic bits for home repair

Ein perfektes, robustes und durchdachtes Werkzeug

These tools work beautifully.