dynofit 5-Piece Twist Socket Set 1/2" Drive Impact Extractor Tool for Removing Rust Deformation Peeling and Breaking Lug Nut/Wheel Bolt Metric 17mm 19mm 21mm 22mm with Drift Punch Nut Removal Bar

My Fiat had dealer installed lock lug bolts and the key was damaged. This wheel lug bolt/nut remover socket kit worked perfectly and easily removes lock lugs! Just hammer the appropriate size remover socket on the lock lug or damaged lug nut. Then use a racket or breaker bar to remove the lug nut. The damaged bolt/nut will be stuck in the socket so use the included tool to hammer it out. Easy and no more worries or having to spend big money to have damaged or unwanted lock lugs removed! Best tool I’ve used! I used the one socket 4 times and as you can see in my photo it still looked new after the last lock was removed.

I bought this set of nut removers to remove 3 wheel locks from my car after a roadside flat and we could not locate the original wheel lock key. Easy to use - find the closest size socket to the wheel lock size you want to remove, slide it over the lock and use a hand held sledge hammer and give it 3-4 good hits seating the socket on the nut, use a 1/2inch breaker bar and slowly turn counterclockwise and comes right off . It comes with a round bar in the kit to remove the nut wedged in the socket- move on to the next one.I had all 3 lock nuts removed in 2 minutes!! the metal cutters do not even show a sign of use so this would be able to be used many times. great value for the money and it works as intended.

Mechanic over tightened lugs nuts and conventional tools just rounded corners of lug nuts. This product and a longer power bar did excellent job of removing lug nuts. Highly recommend!

I had two days training to change the lug nuts in my ford focus 2018 without any luck seems like superman tie them at his maximum strength, but thanks to this kit I was able to get them out in a couple of minutes HIGHLY RECOMMEND!! Excellent product.

Worked great. It easily removed a rounded off wheel stud that had been over tightened.

We used the largest 22 mm socket on the stuck lug nut but it also rounded the nut further. Then we used the next smaller socket and pounded it on with a hammer and put a breaker bar on the heavy 3/4 inch drive ratchet and it gripped the lug nut and finally successfully loosened it for removal.

Had to remove a rounded wheel bolt that was wrenched to about 200 ft lbs. The extractors appear very sturdy. Hammered the 17mm on the bolt and cranked it right out. Good add to the tool chest.Pricing is very good and shipping was fast. Recommend!

After the second time the McGard key's teeth sheared off, the 21mm to in this set got it and its siblings off of my Jeep without breaking a sweat. Tried the AutoZone tool and a sacrificial socket first, but neither were able to handle the excess torque that the dealer put on the lugs. This set and a 2lb hammer never slipped. Happy to have this in my tool chest and the McGard wheel locks in the trash.

En menos de 10 segundos me permitió retirar los pernos de seguridad McGard de los cuales no tenían la llave cuando compré mi auto. Solo le di tres golpes ligeros con un martillo y gire para sacarlos, la herramienta funcionó perfectamente en los 4 pernos y no se nota que se haya maltratado, los pernos a pesar de ser duros fueron mordidos y hasta deformados por esta herramienta. Muy recomendada

I think these are really good, super grippy and worked first try, with some heat aha. Really good quality.