For 2011 2012 2013Hyundai Elantra Headlight Assembly Left Driver and Right Passenger Side Headlamp Pair Halogen Headlights Black OEM HY2502161 (2011-2013 Elantra Pair of Lights)

1) THE SOCKET FOR THE TURN SIGNAL LAMP IS DEFECTIVE, INCORRECTLY DESIGNED AND INCORRECTLY MANUFACTURED! THERE IS NO BULB ON THIS PLANET THAT WILL FIT THE TURN SIGNAL SOCKET. IF YOU USE THE SOCKET THAT YOU ALREADY HAVE FROM YOUR OLD HEADLIGHT ASSEMBLY, THE ELECTRICAL CONNECTIONS WILL NOT MAKE CONTACT AND YOU WILL HAVE AT LEAST ONE TURN SIGNAL NOT WORK.2) YOU CANNOT ADJUST THE ELEVATION OF THE LOW BEAM HEADLIGHTS! THE ADJUSTMENT SCREWS ON THE BACK OF THE HEADLIGHT ASSEMBLY DO NOTHING. THE MECHANISM THAT SHOULD BE IN THE HEADLIGHT ASSEMBLY IS NOT THERE. IN ITS PLACE IS A METAL SCREW THAT DOES NOTHING WHEN IT'S TURNED. SECONDLY, THE SCREWS ON THE DRIVER SIDE CANNOT BE REACHED BECAUSE THE FUSE BOX IS BLOCKING ACCESS. IN THE FACTORY HEADLIGHTS, THERE ARE SCREW ADJUSTMENTS ACCESSIBLE FROM THE TOP OF THE ASSEMBLY. THIS MECHANISM WAS NEVER EVEN A THOUGHT WITH THIS AFTER-MARKET HEADLIGHT ASSEMBLY.3) THE ELECTRICAL CONNECTOR FOR THE DRIVER SIDE IS WRONG AND WILL NOT ACCEPT THE CONNECTION FROM THE CAR!4) ON THE DRIVERS SIDE, THE WIRE CLIP THAT HOLDS THE HIGH BEAM BULB INTO THE ASSEMBLY IS INCORRECTLY MADE. THE PLASTIC IN THE ASSEMBLY THAT HOLDS THIS WIRE CLIP IS ALSO INCORRECT. IF AT SOME POINT YOU EVER NEED TO REPLACE THE HIGH BEAM BULB, YOU WILL HAVE TO COMPLETELY REMOVE THE ASSEMBLY FROM THE CAR TO GAIN ACCESS TO THE SCREW THAT HOLDS THE WIRE CLIP, UNSCREW THE WIRE, REPLACE THE BULB, THEN REASSEMBLE EVERYTHING AGAIN.THE CORRECTIVE ACTION REQUIRED FOR THIS ASSEMBLY TO FUNCTION IS TO REPLACE THEM A SECOND TIME OR MODIFY THEM MECHANICALLY AND ELECTRICALLY. THESE REPLACEMENT HEADLIGHT ASSEMBLIES ARE GARBAGE! SAVE YOURSELF THE FRUSTRATION AND HEADACHE AND BUY REPLACEMENTS FROM SOME OTHER SUPPLIER! THESE SUCK!