Enermax LiqTech TR 4 360 (ELC-LTTR360-TBP)

I've been running this 360mm AIO on a 1950x with all core overclock to 4.00GHz since july. I've not experienced any of the problems others have said with corrosion or high temps. It's generally idling at 25°c and gets to around 70°c under load (generally video encoding). I did replace the fans with coolermaster masterfan pro static pressure RGB fans though because the standard fans were pretty loud. These fans might not perform quite as well as the standard ones. I have seen temps in the mid 80's when running synthetic stress tests on both cpu and fpu but these aren't realistic for actual use. All in all I'd recommend this for TR4 cpu's but I wish there was more choice out there for this socket. Oh yeah, the white lit Enermax logo on the block looks good. It's bright and clean. Edit. Just had to try and RMA after 11 months of medium use. Temps on the 1950x have risen by 20 degrees under load to the point of system crashes. As others have said this cooler seems to be susceptible to corrosion. Pretty annoyed and may have to go with noctua air cooling.

Very easy to install. Like the rubber arround the screws which allows for remounting without damaging the product from metal to metal contact. Has coolled my threadripper really well for a few months now

Would give zero stars if I could. Started off promising, with low temps. wind on 6 months later, its idling at 68 degrees and the CPU is throttling like crazy trying to keep cool. Under a small amount of load it tops off in the 70s and CPU frequency drops to 550Mhz. Looking around the internet there is a problem with is AIO where corrosion builds up internally and then blocks everything. Took it off, put on my Noctua NH-U14S heatsink and fan, and I'm back at 46 degrees. This AIO is going straight back, for a refund. I won't bother with another one, too many people having similar problems.

Not much to say really only, highly disappointed. Only got to install it after planning my build and purchasing 3 months back because I could see the demand was more than they could manufacture them. It was sealed in its box until today. Set up all on a test bench only for one fan to not work. And the noise from the pump is really irritating making gargling noises every so often. Edit 1: After some run time the gargling has stopped (probably due to tramped air) and I fixed the fan as it was unmounted from its bearing which snapped back in place to function again. Still expected quality check to catch that. Revised from 1 ⭐ to 3. Edit 2. Returned to sender. Idle temps from 48-60 degrees. No use. Revised from 3 ⭐ to 1.

Temps only good for first few months at around 40 Idol, later on the idol temps become 60 and the fan was noisy running close to 100%.

Absolutely amazing

I can confirm both the positive and negative reviews on here: +ve - The best TR cooling solution at time of purchase bar none! -ve - Seven months later I nearly destroy a £1000 CPU because of corrosion/gunk build up. This should NEVER happen with an established AIO manufacturer and a quick search will find plenty of examples with this particular cooler on the web. I'm hoping they learned from their mistakes and the MK2 addresses the issues, but I'd steer clear of this model at any price. Currently processing a refund with Amazon UK.

Initially this was great providing low CPU temps but 6 months later my CPU is idling at 68 with fans on full so going to apply for a refund as it looks like the same problem others have reported with a build up internally.

Never again will I purchase Enermax. I purchased a Liqtech 360 for my new build with a Threadripper and the pump sounded like a dying goat. Returned that for another brand new cooler and guess what, this one sounds like I'm polishing stones in my PC!! It cools great if you can tolerate the noise.

Kompliment an e-joker. In nicht mal 48 Stunden geliefert, super verpakt! "Leider muss ich meine Bewertung revidieren! Nachdem ich fortlaufend höhere Temperaturen mit der Kühlung hatte hab ich etwas nachgeforscht und bin auf ein sehr verbreitetes Problem gestoßen das auch bei mir der Fall zu sein scheint. Die Pumpe ist fest! Es findet keine Zirkulation statt, d.h. nur der erste Lüfter bringt warme Luft raus, die anderen beiden bleiben kalt und das bei knapp 70°C Prozessor Temperatur. So wie ich das verstanden hab ist das ein Problem mit dem Kupferblock wo die Pumpe drin sitzt und dem Kühlmittel welches Korrosion verursacht. Daher wird ein Austausch nix bringen. Dem Riesen Stück Kupfer und meinem mit 11 Lüftern bestücktem Gehäuse ist es zu verdanken das der Prozessor keinen Schaden genommen hat. Auch dem Nachfolgemodell würde ich mein generelles Misstrauen aussprechen. Habe mich als Ersatz für den Noctua NH-U14S TR4-SP3 140mm Premium Entschieden+2. Baugleichen Lüfter. Mindestens 10° kühler als die Wa-Kü am Anfang vom Ende nicht zu sprechen. Lediglich die 3 Lüfter tun jetzt noch ihren Dienst in meinem Gehäuse für die abwärme... Sehr Schade, bin wahnsinnig enttäuscht da die Ursprüngliche Konstruktion echt super aussah und toll zusammen passte. " *28.02.2019 Die Wasserkühlung ist wirklich sehr gut verarbeitet. Alle Lüfter sind auf einer Gummischicht verschraubt. Die Pumpe sitzt Bombenfest auf dem Sockel und deckt den Chip wirklich komplett ab. Die Schläuche sin auch sehr stabil, lassen sich aber gut in die richtige Richtung biegen. Sehr leise. Da ich es noch nicht geschafft hab meinen 1900x im Standard Takt ins schwitzen zu bringen kann ich zu den Temperaturen noch nichts genaues sagen. Bist jetzt war er immer unter 50 Grad, auch mit 2 Graka's am Anschlag. Das schlichte aber hochwertig wirkendes Äußere ist passt sehr gut in mein Gesamt "Kunstwerk". Bin sehr zufrieden damit.

Ce liquid cooler fonctionnait très bien au début, bien plus efficace que la concurence, et c'est le 4ème PC haut de gamme que j'installe pour faire des calculs 3D intensifs. Cela dit ils ont visiblement décidé de mettre dedans un liquide très corrosif qui attaque les matériaux conducteurs à l’intérieur. De plus la pompe semble fonctionner très mal au bout d'un moment (l'un des tuyaux est devenu extrêmement chaud même si je force la pompe à tourner à 100%). Comparaison : Au début je ne dépassait pas les 56°C en paramètres standard avec le CPU à 100% en 3,65Ghz pendant des heures, maintenant je suis obligé de mettre à 100% ventilateurs et pompe et malgré cela ça monte à 80°C à seulement 3,4Ghz sur un 1950x. Autant dire que mon CPU à 850 euros y serait passé si je ne faisais pas attention, et visiblement Enermax a décidé de mettre dedans des produits très mauvais à long terme (et je ne l'ai que depuis 5 mois). Tout cela pour être meilleurs que les autres sur les benchmark et vendre plus .... Regarder sur des forums en ligne avant de l'acheter, je suis tombé sur beaucoup de cas similaire au miens.

Pessimo prodotto non ci sono altre parole per descriverlo, acquistato su Amazon Warehouse, "condizioni accettabili", accettabili da chi, appena montato il processore è schizzato a 90 gradi e il PC si è spento, il radiatore è arrivato con alette piegate, le ventole con le parti in gomma scollate, il liquido interno è parzialmente inesistente, smontato all'interno presenta corrosione galvanica e residui non ben identificati. Il prodotto anche se usato prima di essere messo in vendita deve essere verificato perché si rischia di fare bruciare al cliente CPU e scheda madre.

Justo 2 años de su compra la bomba da revoluciones pero no mueve el agua, el calor se concentra en el bloque y termina apagándose por seguridad el Pc. ¡¡AVOID BUYING ANY ENERMAX PRODUCT!!