Fasgear PCIe5.0 GPU Power Cable 70cm | 16pin(12+4) 12VHPWR Connector for RTX 3090 Ti 4080 4090 4070Ti | 3x8pin(4+4) CPU Male Plugs Only for Corsair/Great Wall/Thermaltake Fully Modular PSU (Black)

No more power issues had a 2x 8 pin that ran my RTX 5080 but had problems with power when fans where on full power.

Nice and flexible, comes with clips to organize the cables which I didn’t expect to see.

My 4090 GPU was not working with the default cables, due to lack of power. While not listed in the product page, it also fits the pin layout of Gigabyte PSU sockets. Mine is a P850GM. Without having to upgrade the entire PSU to ATX 3.0 standard that has the single 12vhprw connector on it, this did the job and cleaned up all the cable mess that comes with the 3 PCIE cable adapter shipped with the GPU and resolves the problem of some cables just not working at all. Plenty of length in a large case so that the connection to the card is not under stress by bending. The split to three PCIE cables happens far enough down the cable so that it is hidden at the back of the case and not in the way of other cables.

Failed after less than 2 years. Dont recommend. Buy original instead directly from your PSU manufacturer. Money lost and lesson learned.

Great cable! Looks so much better than what Nvidia supplies. It's easy to install, decent quality, and powers my RTX5090 Founders Edition perfectly. The only thing with mine is I was not supplied the 4 transparent cable comb acrylic clips in the box (they were missing), so that's why I've given 4/5 stars.

The 40 series GPU’s have a particularly poor adapter that is provided, they are unsightly and could potentially cause issues. This PCI-E 5.0 cable connects directly into the PSU, removing all risk associated with joints. Not only is it aesthetically pleasing, it is simply safer. Couple of point to watch out for: 1. Get the lead that connects into the PSU and not the 30cm extension. 2. Ensure you choose the right cable that is compatible with your PSU. 3. This cable is 70cm and will be long enough to reach your GPU in most places. Highly recommended all.

Did'nt work with my Bequiet 1000w PSU as it had only 2 connectors for the 3 cable plugs. But I kept it for a future upgrade.

This cable works great for the 4070 ti despite having 3 pcie connections for the psu. You can either plug 2 or 3 into your psu, it doesn't make any difference. I stress tested with only 2 plugged in and got full TDP 110% 315w and also the same for 3 connections plugged in. The design is much better than the standard shorter cable splitter that comes with the 4070 ti and looks so much better and doesn't take up nearly as much space. Really happy with the purchase.

I'm using this cable for an aorus 5090. It's only been 3 days so far and I've run some games for a good 30minutes with no issues or heating concerns. The cable does get slightly warm to the touch, but I guess this is normal. The quality of the cable is decent as well, However, the pins at the 12x4 single side aren't too rigid. So for example, if you move the corner most cable, you would see the pin on the connector to be moving as well. So I made sure to push the connector to the graphics card by holding the cables. Other than this, it's perfect. They provide 4 cable combs and some cable ties too.

I left a negative review on this product but am amending it here. I have an EVGA PSU G5 850 Supa Nova. this cable does not fit EVGA psu's at least not this one. I have a Corsair PSU RM1000 and a spare RM750e and the cable fits perfectly. I have replaced the Evga psu with the Corsair and it works perfectly. But the most important thing is it looks way better and neater.

good quality cable, works great with my Corsair HX1200 and Gigabyte Gaming OC 4090. Full 600W power limit is available, plugs straight into the PSU, far less cable mess than the nividia adapter, and don't have to worry about it melting as each wire goes straight to one pin. Not sure why Fasgear didn't just use 2 x PCIe 4+4 connectors like the official corsair one does, then it wouldn't need those dinky jumper cables... but it works just the same, and in my case you can't see the back of the PSU anyway so the ugliness is well hidden. The only negative comment I have is the clip on cable organizers are pretty dumb, and a pain in the ass to install. Its very easy to bend the wires while pushing them on, so be careful, go one wire at a time, and use the 2nd wire to push the first one up into position. These should come pre-installed, and ideally shouldn't be clip on, they should just be permanently on the cable like the cablemod ones are. They could then be solid all round and look nice from either side. Would help idiots like me that decided to change my routing and realized that meant I had put them on the ugly way.

Excelente producto, de muy buena calidad y muy flexible así como resistente. Yo lo uso con una fuente de poder Cooler Master MWE Gold 850 V2 Full Modular y una tarjeta gráfica RX 9070 XT Sapphire nitro+ y funciona perfecto

Going strong for close to 4 years with no issues.