- 2 Pack 8 Inch LED Recessed Lighting, 5CCT Canless Wafer, White | 2700K-6000K Selectable, 5%-100% Dimmable, Ultra-thin, Metal housing 1400LM 18W, IC & Damp Rated, ETL & FCC 50000h Life Span

I absolutely love these lights. They are a great accent to my kitchen bar area. Never purchase light bulbs again and great lighting.

I replaced both the old 90s fluorescent box fixture and also the adjacent dining area pendant in my kitchen… so I have purchased and installed 16 of these lights now. The size hole saw to use for 4” lights is 105mm. Test the hole saw you plan on using on cardboard and that way you don’t make the wrong size hole in your ceiling. Right?! The first light in your multiple run of lights goes where the box for old light used to be. Most boxes are smaller in diameter than the 4” light, therefore if you remove the old box by knocking it upwards into attic space, you can use that hole for your first light, enlarging it as necessary, and connecting these wires into the first new box using the push connectors supplied. Each light comes with a box which indicates it can be installed in contact with insulation and vapor barriers rated to 90C which includes standard fiberglass insulation. There are not 1/2” bushings to protect wires in knockouts so you will need to buy these if needed/desired. The box fits through the hole for light so if you make your wires long enough, you can wire and then stuff it into the hole without going into attic space if desired. Of course if you want to secure box to a truss or staple down the Romex wire, you probably need to go into the attic. The box has the variable light settings on a switch on the outside. Dangle the white cable out the hole and connect your light. Repeat for all lights in run. If you don’t know how to wire these, watch a video or get someone to help. I like to leave pushing actual light into the hole until the very end so that I can easily reach up to the box and adjust the variable light setting. Once you test it all out, then put the lights into the hole in ceiling. The spring clamps make this very easy. There is a foam gasket that rests between the ceiling and the aluminum light housing for a good seal. Zero issues with lights that "didn’t work." I think the light brightness and warmth settings are more than adequate and I have all mine set on full bright daylight so that I can hear angels sing every time we flip the switch. I feel like I’ve been waiting 20 years these. They are perfect for my needs.

These lights a very light and easy to install. Very quick and simple so that made the install in like 5 minutes. I used these a closet lights there very bright and great for small spaces and needing light. I love these. It’s only been a couple weeks but they work great so far.

These seem like very high quality lights that will last many years - and they are actually ETL listed unlike many of the others with no listing, or a fake listing with obvious problems (no ground wire? That's not UL or ETL certified!) My only concern with these lights are the color temperatures - there's no way the 2700K setting is a true 2700K, they appear a fair bit cooler. This made for a slight annoyance when installing these as I set them to 3000K thinking "that's the second warmest temperature, I don't want the room to be too yellow" but had to pull them down and adjust because their 3000K setting was too cool. Just keep in mind if you want to keep these in a "warm" space that the selectable color setting is more "variations on how cool you want the lighting" rather than what I believe to be true warm options.

Great value for money. Like the different light intensity settings. Super easy to install. Came quickly, well packaged.

Wish I had found these years ago. The color, size, dimmability, material are perfect. Easy to install and great value for the money. Plastic material matches white of ceiling and it’s perfectly flush to ceiling. Excellent look - nice and clean.

Easy install with easy wiring. No complaints

Great lights. They have three color temps which is nice. They were easy to install. Look good/ work good.