Silverstone NT08-115XP Processeur Refroidisseur 8 cm Noir

I ordered the SilverStone SST-KR01.This is a cooler with copper pipes and aluminium fins. I used it to cool a 2400G using it's vega 11 iGPU. This cooler managed it perfectly, idling around 28c, and under stress getting to 52c max.Really happy with it. I maxed the fan speed to test how loud it is, and it's almost inaudible at max RPM. Great performance for such a cheap cooler.Silverstone have also added clips to the fan, so if the ender user ever wants to replace the current fan, maybe for an rgb one, it's easily done.The fitting is your standard AMD clip style, which is easy to fit. It comes with thermal paste (not applied) however I chose to add my own (arctic MX-4, which i would highly recommend)TL:DR it's a great budget cooler

Very quiet, well built and effective. I have it fitted in a mini STX PC cooling an i3 7100 which is in a sitting room and always on. Can't be heard running and keeps temperatures in the low 30s running at the lowest speed (silent) bios setting. I have seen complaints about fitting this cooler. However, it uses an identical system to an Intel stock cooler and after reminding myself about how to set it up, what to push and what to turn, it was straightforward, even on a cramped mini STX board.

Keeps my 6600K quite cool 21-27 degrees at idle and under 50 degrees at load quite good for a small cooler.

Since building my new PC I had only installed a stock cooler to my i5. Under load I was experiencing temperatures close to 80 degrees c. Which of course won't kill my chip but it's not ideal. I was looking for a cheap aftermarket cooler to upgrade to at that point. Read a couple of reviews online regarding this CPU cooler that were quite positive and on the whole I would have to say they were right about this cooler. It's pretty great!Installing it was fairly easy and that's with my motherboard still in my case. Temps now get no higher than 65 degrees under load. The fan is so much quieter than stock and on the whole. Really happy with it.

Fantastic for the price, cooled my CPU right down and is quiet. Just needed this for an office upgrade and has done the trick.Edit 01/04/21Orginal fan was so good, have ordered another one for the office, for the price, these cant be beated and are so quiet and keep my AM3 CPU's cool!

If you want a low-profile cooler for ITX or mATX systems - there are a lot of similar low-cost coolers somewhat based on the official/original Intel design. It all depends on the mounting system you want and cost:The good:- copper core thus should be OK for medium power/TDP CPUs (spec says 95W but I'd say 65W)- no push-pin installation thus solid, not likely to come off in transit (e.g. if you ship it, move it, etc.)- very low footprint, should fit low-height cases and does not overlap RAM/VRM like bigger fans- quite cheap considering competitive designs (e.g. Noctua at 3x the price)- PWM like just about all CPU fans today.The not so good:- Non-standard fan 92mm, cannot be replaced if it breaks. But cheap?- Whine at high speed. Don't get this for high-TDP CPUs which are likely to use the fan in high-speed mode.- Not cheap considering push-pin in 1/2 the price- You need to install CPU/cooler before you install mainboard into the case.- If you want to replace CPU you likely need to remove board from the case as the mounting plate will likely fall off.All in all it is cheap but not sure I will be able to live with the whine. But difficult to remove and replace now, need to take the whole computer apart. Best try to get a 120mm low-profile fan but naturally watch RAM/VRM height

I have been running this cooler with i7-8086k for a few months now and I'm very happy with it. With the right set-up in UEFI It's dead quiet and keeps the CPU cool. It's very suitable for mobile system and open frames: it's extremely low profile and there are no heat pipes sticking out at sides. Highly recommended.

manufacturers of certain motherboards which have capactitors to close to the socket are a issue with this cooler as the fins can comflict with alot of them so you can literally damage your motherboard or crush a capactitor if your not carefulnot compatible with ASRock H310CM-HDV the chokes get in the way.

Muy reducido y silencioso, se mantiene a unos 48 grados sin forzar.

SST-AR11: dopo aver provato tanti cooler è risultato il migliore. Ha il vantaggio di poter sostituire il ventilatore (4 viti da 3mm) ho montato un 25 mm di spessore e 5000 rpm. Il risultato è che ho raggiunto temperatura CPU di 63° contro gli 86 del dissipatore Intel fornito con i9-12900. Provando molti altri non scendevo sotto i 68-72° (stesse condizioni di stress CPU).Il dissipatore è di piccole dimensioni e non avendo spazio (contenitore rack 2U) con ventola di 25mm entra alla perfezione (naturalmente rimane sufficiente spazio tra ventola e coperchio) Proprio soddisfatto!!!

Il dissipatore va bene per un processore non overcloccabile, ma hanno posizionato gli agganci della ventola in modo poco intelligente. Io ho risolto staccandola e ruotando gli agganci, ma sicuramente per un utente normale il reso é probabile.

Reduce el ruido, dentro de lo razonable por el precio que tiene. La gran sorpesa vino con el rendimiento, me bajo la temperatura de la cpu 10°C y eso que he elimando el ventilador auxiliar de la caja. De tamaño perfecto para placas mitx con caja de tamaño reducido.

Le bruit ça va, si votre pc est fermé. Pour CPU jusqu'à 65w ! Tres facile a installer, pâte thermique fournie !Monté sur un Ryzen pro 4650g (aucun problème)