ArmorPoxy Garage Epoxy Floor Kit – 100% Solids - 2 Part Industrial-Grade Coating w/UltraGlaze Topcoat | DIY Slip & Hot Tire Resistant |300 Sq Ft - Designer Gray - 17 pc kit

Wear a respirator! Epoxy fumes are toxic and just having your garage door open is not enough! perfect all in one kit, easy to follow instructions, and beautiful looking outcomes. If you have a partner helping, I found it easier to just buy two of the smaller kits to get my square foot coverage.

Easy to work with as long as you follow their instructions. End product looks awesome, well with it

After binge-watching a ton of epoxy floor makeover videos, I decided it was time to give our garage a serious glow-up—and Armorpoxy seemed like the perfect choice for the job. We’re in the middle of a full garage remodel, and this floor was the foundation (literally) of the entire vibe. Between work and life, the project took a couple of weeks to complete, but the results were worth every bit of effort. I used two kits for my standard two-car garage, and that ended up being the sweet spot to get full coverage and the finish I wanted. The product itself was solid—good consistency, easy to apply if you follow the steps, and the final look? Sleek, clean, and seriously elevated. The space already feels brand new, and I can’t stop admiring the shine and texture. I’ll be back in a year to post a follow-up and see how it’s held up over time, but for now—this kit definitely delivered. If you’re on the fence about it, go for it. Great product, great results. Brand new floor, brand new vibes.

I like it when it's new, but hard to clean to original quality, I'd say. Plenty for a 3 car garage! The tires like to turn spots yellow and not easy to remove it.

I highly recommend buying double of what you actually need and doing a 2nd coat before putting the flake. I prepped my concrete (it was brand new so I know there were no previous contaminants), but there are several areas that visually are not to my liking. In the past I have done my garages with a different brand and have always done two or more coats. I read the reviews on this product and decided to try just one coat. I should have gone with my gut. Lucky for me the places that I have issues with I plan to put pallet racks over so you should not see it after I get might be longings moved into the garage. Prep and application we're both very easy, the kit comes with everything you need. And the epoxy was really easy to work with. I live in a very humid climate and the clear coat was applied 5 days ago, and is still a bit tacky. But it looks like it's going to be a nice four when everything is moved in. ***UPDATE*** I haven't even parked on the floor yet, I've only been walking and remodeling the room and it's already coming up. I did all the prep work and, it was new concrete so I know that's not the issue. But don't waste your money, buy the Rust-Oleum brand. I used it in my garage at my old house and it held up great for 6 years. I just wanted to try something new and I wish I hadn't. ***Another update*** Finally moved into my new house and the first time I blow my garage out with a leaf blower it peels up! DO NOT BUY THIS!!! STICK WITH RUST-OLEUM ITS BETTER

Fantastic kit and highly recommend. This kit saved me so much time of piecing together all the equipment I would need. You need to buy this stuff anyway, why not do it in one shot? I have seen the kits from big box stores, this is the next level. A great way to get a professional look from a DIY project. Garage is roughly 550SF, new, poured 7 months prior with zero car traffic. Prep Day: Powerwashed then used the Etching solution worked great on my floors. Powerwashed off again and let the floor dry. Used two 10oz tubes of Sikaflex self leveling joint sealer on the cracks around the perimeter. Base Coat was delayed 1 day due to heavy rain, high temps and 100% humidity. Don’t force it if the weather doesn’t fit your frame. You work on the material’s schedule, not your own. The 600sf kit contained plenty of material for my garage, the sides and even a couple of steps. Clear coat went on just fine after allowing base to fully cure and dry for 36 hours. Things I learned during the process applying: 1) Thorough reading the instructions and watch the videos provided at least once. 2) Base coat, make it a two-man job. The constant rushing of 20 minutes to mix/squeegee/roll/ flakes can get messy. And the base coat sticks to everything. One person to mix and pour, one to spread, roll and flake. 3) Don’t freak out if it looks thin when squeegeeing. It evens out on the rolling. 4) Commit to whether you are doing side walls before the rest of the floor. 5) Pre-measure the Part A, Part B and flakes based on how you will be applying. I did this in 3 parts for each bay to maximize my timing. This way you don’t go too heavy flaking on one bay over the others. 6) I wanted a heavier flake and bought my own 12lb bag of black/white/grey to address the nearly 600SF. Kit comes with 6lbs. 7) I used vinegar and paper towels to get the resin off my hands and arms, but NOT for applying directly to surrounding concrete; it will stain.

Our garage remodel turned out great. The instruction are clear and direct removing any guesswork. The kit came with almost everything we needed and some stuff we didn’t need (shoes clip ons / brushes). I ended up getting a few better quality brushes, tape, small roller and muriatic acid. Square footage is true to size quoted. We heavily covered 580 sq ft with a 600 sq ft kit and had about 1/10 of the product remaining. It went down thick and smooth, is durable and looks professionally done at a fraction of the cost and I kept the control to be as OCD as I wanted. 16 hrs of prep and 5 hrs of putting product down. I’m satisfied and glad we went with this option.

This product was exceptional, from the instructions to the application. Armorpoxy has made it so the lay person can complete this job such that it appears to have been done by a professional. I love the color, the kit comes with all necessary tools, and the customer service was extremely responsive when asking questions on application in borderline too low of a temp to apply. Things I’d advise others in: Before applying the flakes, divide the large bag included into sections equally for however many sections you will flake. I started to run out of flakes by my 4th section leaving some inconsistencies in distribution. I’m extremely pleased with the product and would use armorpoxy for any future projects.