ArmorPoxy Garage Epoxy Floor Kit – 100% Solids - 2 Part Industrial-Grade Coating w/UltraGlaze Topcoat | DIY Slip & Hot Tire Resistant |300 Sq Ft - Designer Gray - 17 pc kit

After binge-watching a ton of epoxy floor makeover videos, I decided it was time to give our garage a serious glow-up—and Armorpoxy seemed like the perfect choice for the job. We’re in the middle of a full garage remodel, and this floor was the foundation (literally) of the entire vibe. Between work and life, the project took a couple of weeks to complete, but the results were worth every bit of effort. I used two kits for my standard two-car garage, and that ended up being the sweet spot to get full coverage and the finish I wanted. The product itself was solid—good consistency, easy to apply if you follow the steps, and the final look? Sleek, clean, and seriously elevated. The space already feels brand new, and I can’t stop admiring the shine and texture. I’ll be back in a year to post a follow-up and see how it’s held up over time, but for now—this kit definitely delivered. If you’re on the fence about it, go for it. Great product, great results. Brand new floor, brand new vibes.

Our garage remodel turned out great. The instruction are clear and direct removing any guesswork. The kit came with almost everything we needed. Square footage is true to size quoted. We heavily covered 800 sq ft with a 900 sq ft kit and had a small amount of product remaining. It went down easily, looks professionally done at a fraction of the cost. I’m satisfied and glad we went with this option

I think this kit is great but could use some additional things to make it better. When you need to mix a 2 to 1 ratio of epoxy and hardener you can see through the hardener and guesstimate the halfway point but its not the same for the epoxy one. Its in a gray bin with no markings on the tub to know where the full line is or to where halfway point is. I guessed about half but ended up being a little less and I had more at the end so not having enough epoxy and more hardener changed the tone of the gray epoxy slightly. So essentially you can see the first half vs the second of work bc the tones ended up being a tad different. The squeegee they gave is small and cheap....it ripped off the first time used and I went to buy a higher quality one. Additionally we bought another 3 lbs of flakes bc the 1 lb they gave wouldnt cover very much. I like how they gave you the brushes, the nap rolls and the mixer tool along with gloves so it saves with tedious things to buy. One thing I needed to do (but wasn't about to rent a sander for $150+) was to sand the concrete...the end result would have been better as its blothcy in some spots bc the oils that were too deep in the concrete. Overall this kit was good but needs some better quality items and a form of measuring the epoxy 2x with 1x hardener so its perfectly even instead of guessing as you pour it from a dark tub with no markings.

Our garage remodel turned out great. The instruction are clear and direct removing any guesswork. The kit came with almost everything we needed and some stuff we didn’t need (shoes clip ons / brushes). I ended up getting a few better quality brushes, tape, small roller and muriatic acid. Square footage is true to size quoted. We heavily covered 580 sq ft with a 600 sq ft kit and had about 1/10 of the product remaining. It went down thick and smooth, is durable and looks professionally done at a fraction of the cost and I kept the control to be as OCD as I wanted. 16 hrs of prep and 5 hrs of putting product down. I’m satisfied and glad we went with this option.

I highly recommend buying double of what you actually need and doing a 2nd coat before putting the flake. I prepped my concrete (it was brand new so I know there were no previous contaminants), but there are several areas that visually are not to my liking. In the past I have done my garages with a different brand and have always done two or more coats. I read the reviews on this product and decided to try just one coat. I should have gone with my gut. Lucky for me the places that I have issues with I plan to put pallet racks over so you should not see it after I get might be longings moved into the garage. Prep and application we're both very easy, the kit comes with everything you need. And the epoxy was really easy to work with. I live in a very humid climate and the clear coat was applied 5 days ago, and is still a bit tacky. But it looks like it's going to be a nice four when everything is moved in. ***UPDATE*** I haven't even parked on the floor yet, I've only been walking and remodeling the room and it's already coming up. I did all the prep work and, it was new concrete so I know that's not the issue. But don't waste your money, buy the Rust-Oleum brand. I used it in my garage at my old house and it held up great for 6 years. I just wanted to try something new and I wish I hadn't. ***Another update*** Finally moved into my new house and the first time I blow my garage out with a leaf blower it peels up! DO NOT BUY THIS!!! STICK WITH RUST-OLEUM ITS BETTER

Great product for the money and awesome customer service. Arrived damaged and the epoxy was spilling out in the main bucket. Customer service sent me a new one free of charge, it was 1 gallon more than what came with the kit. This was even after a few months since I didn’t open it right away. Floor turned out great, I would recommend the kit with primer since I bought that separately.

First and foremost my product arrived damaged. AmorPoxy quickly got me out a new product and was able to answer my questions via customer support about using the optional “Primer” step as well as the crack filler. Unfortunately my garage floor already had a layer of ‘something’ from the previous owners so I had to rent a Floor Sander from Home Depot. (The main reason I opted to prime in the first place) Followed that up with the acid etch wash to maximize a clean surface and clear out the concrete dust, moisture test and crack filler, then two coats of primer, followed by the epoxy layer with chips and finally top coat with non slip powder added. Some take aways: My garage floor is roughly 422 square feet, two car garage. The 300 foot kit was PLENTY. had enough primer for a second coat and tons of epoxy and top coat left over. Throwing chips is easy to get out of hand, my floor isn’t perfect, some spots are heavier than others but that’s okay, try to even them out as best as you can. I used my food scale and a small mixing bucket for the epoxy ratios. It’s a 2:1 ratio, and with a quick bonding time they recommend doing small batches. I used Saran Wrap on my food scale and just measured 800 grams Part A to 400 grams Part B, it was perfect to knock out a good size portion of the edges on the floor, then dump out and roll. Easy working with wife Take your time, while knocking this project out in three days seems optimal as advertised that just wasn’t for my life schedule. I was able to sand and acid etch one day, gave it three days to dry, primed, and primed again back to back days, but gave it another 4 days to dry. Then epoxy and chipped. Gave it two days to dry, and then top coat. Gave it two days to dry before walking and will probably give it another two days before equipment and even longer before cars go back in. Call me careful, but I was pretty positive and confident it would look amazing when I was done, and it does! Extremely pleased, but I want it to look amazing next year, and the year after that and so on. So take your time, don’t rush and read the instructions a million times, watch the YouTube video a million times. Overall very satisfied. I will try to update this review in a year 😅 and let you know how it looks.

UPDATE: Tires from motorcycles and cars will leave a black tire STAIN on the epoxy.. The product is great quality, i purchased the 600sqft kit and covered a 3 car garage with it. Really impressed with the way it came out. I will say the video tutorial was very helpful and i suggest re watch it a few times. Downside it although you are buying a “kit” you are missing the paint rollers and extension poles… the roller brush they provide is very short so when you go and buy a paint roller and extension pole i suggest you get a wider roller brush. The epoxy drys fast so id recommend a second person assist you.

This kit was good and im very happy with the finished floor. Cost was more than the kits you buy from big box stores but was worth every penny.

The product was as advertised with all the parts needed to complete the job. The instructions were good. The product installed easy. The coverage was more than advertised. I had 184 square feet to cover and wanted to put two coats of the epoxy down so ended up ordering two 300 square feet kits. I was able to do the two coats of epoxy with the one kit and do four coats of top coat with one kit. I used one package of flakes for a heavy coverage which hit any imperfections. I think it turned out good and looks really nice.