Phanteks Enthoo Luxe Tempered Glass PC Case PH-ES614LTG

This case is fantastic. Building my PC in this case was a smooth experience. Lots of space and the user manual was very helpful, detailing every aspect of the case as well as a guide for the screws that came with the case, all of which were a big plus for me considering I am a novice at building a PC from scratch. Would definitely recommend, especially to users who are inexperienced at building a new high end PC.

I have the white edition of this case and moving from the haf x to this was the best thing I ever did the watercooling possibilitys are brilliant for a beginner or a pro gamer this is a buy now productIf you want roomWatercooling optionsExpandabilityFeaturesFantastic cable managementFantastic air flowThen this case is for anyone

Has the owner of the much bigger brother the Phanteks Enthoo Primo SE I was expecting nothing but the best quality case build, the best airflow options, a well thought out Case from the Phanteks LUXE TG RGB, And boy have they delivered.With a choice of 2 colours black or grey this is only the limiting factor of the Phanteks Luxe, Made from Aluminium and glass with little plastic on show only the feet and some bezel around the glass that rgb shine on is plastic but it is of good quality you cant feel any difference and definitely cannot tell what is plastic just looking at it,There's ample room for the biggest of GPU's so no probz there, all the Gromit are well placed and plentiful but one or two are a little on the small side but again well placed, The rear takes a 140mm or 120mm and matching rads too but not if you want to do a push, push config in the roof, at the front you can install either x2 120mm fans and a 240mm radiator, x2 140mm but no 280mm radiator or so they say but I'm sure if you removed the HDD bays there would be room I will try and install my x62 at a later date this week and x1 200mm and in the floor there is room for x2 140mm fans and x2 120mm fans but if you want to install rads in this area you will need to remove the Shroud, in the roof its 3x 120mm, 2x 140mm maybe 3 at a push, in the roof there's plenty of room for push pull fan config, the PSU shroud is removable and held in by 3 thumb screws at the rear that are easy to get to but bare in mind all these thumb screws for the first time will need some force to remove them like a screw driver there well in there, the shroud also has a cable Gromit whole placed at the front but really I think it should have been on the roof of the shroud in line with Gpu cables pin connectors less cable travel then It comes with a Pump bracket and res brackets and a box of all the screw to build with the case plus spares, the pump mounting bracket is covered with anti vibration padding on the feet and main surface, The drive bay caddy is removable and held in by 2 thumb screws at the top and 2 at the bottom, but it also can be split in 2 so you can have 3 HDD suspended from the roof or on the floor and again this has anti vibration padding to keep noise levels to a minimum, There are also x2 SSD mounting point on the front side so can be seen through the TG and again there is adequate room for cables to route back to psu without been seen .The fans in the roof use a rail system but not removable, this is something I would have liked to see in a case of this price and calibre, ( Phanteks please make a removable Fan rail system in the high end water cooling cases) But with the amount of space you have in this case for mounting fans is a breeze, The TG is held onto the case by hinges at the rear and padded thumb screws keep it securely closed and don't need must turning before they drop off, I have my pc on a totally level stand buy the Tempered glass door falls open freely without prompt, but bear in mind that when you take out the TG thumb screws that just inside the case behind the TG is a little spring loaded button that is designed to push open the TG door away from the frame just in case it tries sticks shut on release of thumb screws, this caught me out on the first time and sprung open nearly knocking over a drink on my desk. Also I will mention this too, They do not supply the RGB adapter with this case you have to buy it separately if you want to use your on bored RGB lighting like Mystic Light or Aura, this is a oversight I think has they are clearly advertising it as Aura compatible and for the price it cost to buy the adapter they could just easily include it in the accessories box as not everyone has access to a bank card and Amazon. The RGB lighting to show where the leds are with spotting but it looks so sexy who cares anyway.At the rear side of the case there is plenty of room for cable management with tie downs everywhere and room to add more if you want to.So to round off, this case is a dream to work with, you wont come in to many issues other than what I have spoken about, This case is worth every penny, Highly recommend this case.

Case arrived fine just the box looked like Conor Mcgregor had a few words with its shipping box was fine thow 🙂