JUYEER Universal Hotas Desk Mount for Thrustmaster Warthog 10C, Throttle, Winwing Orion 1 & 2, T.16000M FCS, TCA Officer Pack Airbus, VKB Gunfighter MK.lll, Logitech X52/X52 Pro/X55/X56 (two pack)

I was somewhat hesitant to buy this as their were no reviews but I'm glad I did. It fits my Saitek X-55 perfectly and it feels solid once everything is tightened up. One thing to note is that it is a little tricky to build as there are a lot of sliding and adjustable parts so go into building things expecting it to take a good 20-30 mins to get it all together and probably a little longer to adjust everything to its perfect position. The great thing is pretty much everything can be adjusted to suit your setup and being able to move the controls a fair bit forward & backwards really does help get everything in the correct position. The table clamp can also be moved up and down so no matter what thickness you are trying to clamp to this will fit but it's not made clear in the instructions that you can do this! I mounted mine to 5ml metal plate with no issues! It comes with two different universal mounting plate styles and a whole load of bolts, wing nuts and washers so you should find it fits pretty much anything and it did fit my Saitek X-55 perfectly. Overall this is an excellent solution to mounting your flight controls. It is expensive but the quality of the metal feels very good so is probably justified.

Seems pretty sturdy, theres a slight vertical shift on the arm however as only held by 4 metal things in a grove expected. Install can take 30mins - 1hr depending on if you ingore the instructions and have to unassemble bits. Other than that they work surprisingly well. Negative points for perhaps having shorter central pole options however imaging i could just get it cut somewhere. or someone may just tell me what it's called and i'd order a shorter part. I guess having a rubber stopper for bottom of unit would be nice as it's a little sharp. Other than that it's easy to mount and dismount, secure and holds my x56 without issues. Would recommend a height adjustable desk to anyone looking at using so you can get knees comfortably under hotas In short if u want a mount for a hotas, then worth getting and certainly a lot cheaper than offerings from virpil and VKB.

It’s good quality, however it is quite a pain to set up and a bit annoying to mount. Other than that it works as intended

I find the mounts to be excellent. Yes there can be some fiddling around while assembling them but just keep the fittings on the looser side and tighten them at the end it really helps. Also they come with multiple fittings to fit the stick to the stand and are of good quality also.

Was a utter pain to assemble and even after that it does not properly fit the T flight HOTAS X despite it showing it as compatible in the manual. 2 hours of my life wasted trying to get this to work. Sent back this utter garbage

Comes "partially" pre-built. The lever pulling system that attaches to the table is already attached now. More than enough hardware/screws/wing nuts/bolts to put this thing together to match the listed sticks/throttles the mount supports. I only used 4 wing nuts and 4 bolts from a bag, which weighed more than a pound, that was filled with all types and lengths of screws/wingnuts/bolts. The bag was worthy of being scrap metal kind of weight. Good quality stainless steel hardware and lots of it. They had to accommodate all the types of hardware the mount supports so your hardware only needs the few bolts from the bag and then you are done with it. This unit will fit the items it says it does. Nice and black. Now that i put this together and used it i can say that it will do the job nicely indeed. I suggest you do not use too much force when clamping. Pushing a button or pushing the throttle does not need a 50 lbs opposite energy clamping force. Use common sense and clamp it to the table but dont apply 50 lbs of pressure. You wont need to offset that much. The top screws that hold the flat plate that is flat on top of your table could be a little longer and dig deeper into the unit, i think. That will give the unit a lot more strength. While the screws do their job, it will only do so for people that dont clamp down hard. If you clamp down hard then you might have issues with warping. For me this was a really cool change and i noticed right away when in my DCS Spitfire that i was doing better using a different position than before. It was way better to have the throttle on the left not so high as before. So the mount did do its job nicely indeed. Put this together nicely. Dont over torque anything. You are only off setting a few pounds of pressure at the most pushing buttons, levers and switches. Do that and the mount will serve you, for a long time, very nicely indeed. I am happy. Playing DCS is as simple as clamping down joystick and throttle now.

Very nice mount with lots of extras for various types of joysticks. I tried a Thrustmaster Warthog , a T.16000m and a simple T.Flight X. All fitted nicely. Assembly was not too hard. Plenty of extra screws included.

Very solid,stable.used with warthog stick and throttle.

Solid materials and stable as a rock. It takes some time and patience to assemble it but result is great. You can modify length and high as you need and what is most important you can move rails under the table so it doesn't stick on your side of table which is tidy and neat.

So far im missing one part for the folding

Der erstmalige Aufbau gestaltete sich etwas schwierig. Das Resultat ist richtig gut: die Halterung ist sehr stabil und sehr einfach am Tisch anzubringen und zu lösen. Die Controller sind an der Halterung festgeschraubt. Das Produkt macht richtig Spaß

Als alle onderdelen vastzitten is het een zeer stabiele constructie. Er zijn veel onderdelen. Je bent wel even bezig met monteren. Alles is goed en mooi afgewerkt.

Great. Does what it is supposed to do. Good quality.