Rust-Oleum AE0060004E8 400ml Radiator Enamel Spray Paint - Chrome

This radiator enamel is great, though it is important to follow the instructions, I sprayed mine outside & with a mask on, on a warm day, propped up with a dust sheet as a back drop so as to avoid the spray hitting anywhere else. It is important to do fine coats after making sure that the radiator is smooth and clean. I missed a bit that was rough so had to sand the area with a very fine paper and do it again (but only when dry), I made a mistake of spraying too much on in a couple of area's so had to sand a couple of runs off too, Eventually after getting the hang of it and doing 3 fine coats, the radiator looks great. I have to add though it does not look chrome but more like a shiny aluminium finish which is what I expected after reading the reviews.

Just finished build. For most radiators I used plastic chrome sleeve wraps but for a couple there are elbow joints so that isn't an option. This worked a treat. Removed 1 star as its not mirror finish chrome (which would be near impossible to get from a spray anyway). Remember to use primer spray on the copper pipes first to help it grip but it looks fantastic. If some does get on surrounding surfaces (I had a small gap in my stuck down newspaper) then a little white spirit removes it a treat.

I bought a "silver" antique mirror from Wayfair, but when it arrived there was a lot of gold and bronze colours in the frame. So I was unable to use it as it arrived as it clashed with my bedroom decor. So I was looking high and low for silver/chrome spray paint that didn't have any glitter particles, as I'm not 5 years old. Then I came across the Rust Oleum Radiator Enamel Chrome spray. I was hesitant to purchase it as it was advertised for radiators, but I intended to spray it on something metal, so how wrong could it go? In fact, the finished look came out perfectly. I got the shine I wanted, without the glitter and it suits my bedroom decor. On a side note, the colour is not what's on the cap, but my photos should give you a good indication on the spray colour. It takes about an hour to dry, but a full 24 hours to have a "hard-dry", meaning no accidental fingerprints when moving the frame to wear you want to place it. It also has a strong smell, so for everyone with a face mask during lockdown, you're in luck! They should work perfectly. I did leave my frame to dry outside for an hour to dissipate as much of the fumes as possible and to help with the drying. If you do this, make sure no bugs, flies, grass stuff get blown onto drying product, as this may be hard to remove if you notice too late. Any way, this product is top notch and i still have half a can or more still left.

Looks amazing once on the radiator. Far better looking than painting with a brush, my previously painted radiator needed two coats of this study and that emptied the can so be careful to order the correct amount of cans. So much more better than have s plain white radiator. I always get commented about it when people ever my house.Make sure you watch a couple of YouTube videos about how to spray of you're a novice.The only disadvantage of this product is that it's very exciting to print one radiator target than use a can of paint but your get a far better finish. Also. The smell of seriously strong I can't tell you enough for important it is to have a fully ventilated area before spraying, the mist from the spray also goes everywhere so ensure to cover up your furniture and make sure you do this during the day s early as possible as you'll need to leave the doors and windows open for suggestions 4 hours after spraying, it's that's strong

NEVER EVER EVER USE INDOORS I DID AND EVERYTHING IN ALL OF THE ROOM ENDED UP WITH A SILVER COATING ON IT AND I MEAN EVERYTHING REMOVE YOUR RADIATORS AND SPRAY THEM OUTSIDE WITH A MASK ON APPLY A THINLAYER WAIT FOR IT TO DRY AND THEN SPRAY AGAIN DONT OVER SPRAY OR THE PAINT WILL RUN ALOT! I DID TWO LARGE RADS YOU NEED A TIN FOR EACH RAD TAKE YOUR TIME AND THEY WILL LOOK GOOD!

We wanted to update our radiator. This product did the job.

Chrome description is completely incorrect. Not even close.🧐 Significantly duller. It is like a brushed aluminium. But that said, it's a decent enough effect on the radiator and the fumes are not bad (compared to the copper which requires Hazmat🤣). Careful how you spray because it runs!3 stars is harsh I know, because it's essentially a good product. But it is miss-selling to advertise it as chrome, especially cheeky to have the can top in the EXACT color you want and would expect!

This is the best quality paint out there. I used it to spray mdf I had primed and the application and finish are second to none. No clogging and an even distribution. Do not however expect the finish to look like chrome as per the lid suggests. It’s more a titanium colour.