Rolite Metal Polish Paste Stainless Steel Scratch Remover 1lb

It works great!!! it removes minor minor scratches and makes my jewelry nice and polished

This does work on stainless steel for polishing and Scratch removal. Knuckle head left a 4-inch scratch on front of fridge. I applied a few applications of product, and with a bit of elbow grease (rubbing with cloth) I buffed out the scratch. So, I can vouch for the scratch removal

Works very well. Good at getting oxidation off of ss. It’s also a pretty good polish. It just can’t get years of scratches out of an old sink. I recommend.

OUTSTANDING POLISH!

I recently purchased the Rolite RMP45z Metal Polish Paste, drawn in by its claims of being an industrial strength scratch remover and cleaner. Unfortunately, my experience with this product fell short of my expectations. To begin with, the consistency of the paste made application a tedious process. It was neither smooth nor easily spreadable, leading to an uneven finish on the metals I attempted to restore. While it was marketed as an effective scratch remover, it hardly made a dent in reducing even the most minor imperfections on my surfaces. Furthermore, the cleaning properties weren't as powerful as I'd hoped. The tarnished sections of my metal objects remained largely unchanged after application, and I found myself resorting to other products in my arsenal to achieve the desired shine and luster. To top it off, the paste left a residue that was quite challenging to remove. It required additional cleaning, which further added to my frustration. While every product has its pros and cons, the drawbacks of the Rolite RMP45z far outweighed its benefits for me. It might work for some, but based on my experience, I'd recommend looking elsewhere for a more effective metal polish solution.

It’s good for a general polish, but it didn’t remove light scratches.

I use this to clean brass door plates at a client. I have been using Brite Boy for years and wanted to try something new. As far as easy to use goes I gave it 5 stars because it is easy but.... like with Brite Boy, I spend more time cleaning off the product once I am done doing the polishing part. This is a problem with all products I have tried, getting them off once the cleaning is done. With that being said, cleanup is still much quicker than before. If I could ever find products that would wipe off with one pass, I would love it, but until that day, this product does a great job. I bought a 1 lb. container of it to test and see how it performed. This went on smoothly and removed all of the water/mineral spots, dirt, grime and everything else. It was quick to use and because it is a paste and not liquid, I didn't have to worry about knocking it over or spilling it. Of course it still takes a little elbow grease to get everything clear off, but that is normal. I have been using, it once per week, for the past couple of months. While the floor plate that is on the doors that open to the outside is trashed each week with more of the same water/mineral spots, dirt, grime and such each week, the inside brass plates tend to stay cleaner in appearance and require less work each week than in the past. The plate on the outside doors, is subjected to sprinklers, dirt, rain, wind, hand carts/dollies going in and out and things like that. I have noticed though, even on this plate, that it has been easier to clean and the inside portion of the plate seems to stay cleaner than in the past. I don't know if it is the "Protective coating" that is making it easier, or because it took off so much possible buildup when I first used it, but I am finding it quicker to complete the cleaning of all the plates, in fraction of the time I was spending before. I will most like buy a large container next time, but so far, I still have about 2/3's of the 1 lb. container left. A little definitely goes a long way. Updated - I added some pictures. Hand cleaned. 1st one shows the uncleaned side and the clean side with residue still on it. 2nd one is after residue removed. Left side cleaned and right dirty Others show reflections in the brass plate.

The only metal polish I've found that really works!!

Improved my sinks greatly. It will still take a few a few polishes.

I had large scratches on my fridge and it helped make them less noticeable.

I followed the directions carrefully to try to remove or even cover a long surface scratch/smudge on my new stainless fridge. I circular rubbed on the paste and buffed it to a shine but the scratch was still there. I waited a while and redid the directions. Scratch is still there and like I said it was more of a smudge, so what am I doing wrong or what should I be doing? I am disappointed to say the least as this is an expensive polish. I will try again later as my arm is tired from polishing.......

SCRATCHES ARE IN TROUBLE WITH THIS PRODUCT.IT REALLY WORKS-

Very good product will use again