PLA Marble Filament 1.75mm, 3D Printer Filament PLA 1.75mm Marble Color 1KG(2.2lbs), Marble

I’ve been using the ZIRO Carbon Fiber PLA filament for several prints now, and it’s become one of my favourite specialty materials for more demanding models. The addition of roughly 15% carbon fiber within the PLA matrix makes a real difference—printed parts feel noticeably stiffer and more premium than standard PLA, with a matte textured finish that looks great straight off the machine. Print behaviour has been very consistent. I ran multiple prints with standard hardened nozzles (0.4 mm recommended) and found extrusion was smooth, the spool wound cleanly, and I didn’t encounter tangles or major feeding issues. The diameter accuracy is tight (±0.03 mm is claimed) and in practice I’ve been getting parts that calibrate well, fit well, and don’t suffer from warping or layer separation. The aesthetic is a strong selling point: the fibre-filled finish gives a “carbon composite” look, which works really well for display items, mechanical covers, props and parts where I want a functional but stylish result. It’s especially good for prints where durability matters and looks matter too. There are a few things to keep in mind though: like all carbon-filled filaments, this one is more abrasive on nozzles—so I always use a hardened steel nozzle rather than a standard brass one. Also, though it prints well at recommended settings (200-220 °C nozzle, 50-60 °C bed), I noticed finer details (very thin walls or delicate spike elements) sometimes need a slower print speed or extra cooling to prevent the fibre reinforcement from shadowing detail. Overall, if you’re printing functional parts or want a professional finish, ZIRO’s Carbon Fiber PLA is a great choice. Reliable, tough, and visually striking—definitely one I’ll keep in the filament rotation.

Prints easily (like any other PLA), but has much less warping than pure PLA. Very neat winding, very consistent print quality, and the carbon fibres give a really nice surface texture. It seems to have genuine chopped fibres, as opposed to powdered CF, which is very nice. It's as good as any other PLA-CF I've used, but the value is phenomenal. A bit cheaper than most, but absolutely of equal quality. The spool also came with a small sample of colour gradient PLA, and a small amount of nozzle cleaning filament, as well as a separate reusable ziploc bag. Completely unexpected, but a lovely surprise. I've bought a lot of filament before, and not once have they included free samples of other filaments, and the cleaning filament is always super useful. The spool itself was fantastic value, even without the added extras, so I'm very happy with this purchase. I was a bit hesitant to buy from a brand I'd never seen before, but will certainly be buying this again. Have shared pictures of the first (not perfect) print, the same print after some sanding, and the free samples.

I got some of this filament for a glow in the dark "Jeloseum" sign (for anyone wondering, it's an in-joke from my VRChat friend circle) and it's really cool stuff. So cool in fact that when I modified my printer and changed the extruder to a bowden style with an e3D V6, I printed the carriage mount out of it! So... onto the issues... I had to ramp the temperature up initially as running it too low caused the nozzle to clog very quickly. Running this filament between 210 and 220*c (I recommend 215*c or to ramp it up in 5*c increments). I also found out that running an 0.6mm nozzle helps with clogging a bit and so moved onto a 0.6mm for convenience. It took me quite a few print tests to actually get this stuff to print properly at a sane temperature. Also, this filament, unlike most other PLA is very slightly hygroscopic and it might be an idea to dry it off if you have had it in storage without a dessicant for a few weeks or print in a humid environment like I have to. Not doing so can cause bubbling and missed extrusions if your filament has absorbed sufficient moisture to do so. Besides that, this stuff sticks well to the print bed, looks dope af when you do thin walled prints and can see the supports inside, the diameter is very consistent . Also, as seen in the photos, put a blacklight behind this stuff and it glows like crazy!! It also has a nice afterglow when it's been hit with regular light, although due to the fact it's blue it doesn't last all that long. Maybe a good 10-30 minutes under a regular incandescent light and longer if it's been hit with sunlight. There's a scientific reason why but I won't go into it here. I'd recommend that anyone who's just starting out with 3D printing holds off a little on getting this stuff until they have learned how to properly dial in a print profile for more exotic stuff like this. This filament can be a real pain to tune for initially, but the payoff is huge. I'll definitely be considering getting more when my spool runs out because it's fun to print under the light of a blacklight :)

I think I'm in love with this stuff - I needed something tougher than 'reguiar' PLA for an ongoing project (dual bottle-cage mounts for my mountain bikes) and this fits the bill beautifully. After a couple of false starts with a clogged nozzle, I've found that it prints really well on my AnyCubic i3 with a hot-end temperature of 220C and a bed temperature of 70C (could probably get away with lower, but it works for me). The resulting prints are not only _very_ tough compared to regular PLA, but they look really attractive too with the plastic cooling down to a rather cool-looking titanium grey. Even at 0.2mm resolution the layers aren't noticeable unless you really look. Even better, the bed adhesion is absolutely fantastic - for the first time in a while I'm able to print things without using a raft (see below ...) - I printed a 160x50x3mm flat plate with just a 10mm brim and there was no warping at all. The end result, with 80% infill, was considerably more rigid than a similar object printed with 'regular' PLA. There are a couple of gotchas, though: - Good as it is, this stuff will make mincemeat of brass nozzles over time since the carbon fibres make it quite abrasive. You don't notice it on a completed print but you will notice it when you print several large objects and your nozzle starts clogging. Hardened nozzles are a must, although you may need to increase your hot-end temperature accordingly. There's nothing to stop you using brass nozzles, just be prepared to change them more often. - If you print something with a raft, be prepared to have fun separating it from the main print. For most practical purposes, you'll probably get away with just using a skirt or brim, even for large objects. - You'll need to run your hot-end at a higher temperature because of the carbon fibre - whilst I can print 'normal' PLA at 190-200C, the carbon-fibre PLA only gave me consistent results at 220C - anything less just wasn't happening. I now keep a 'carbon fibre' preset in Cura which gives me consistently good results. I'm using the standard AnyCubic hot-end and didn't need to make any mods whatsoever. I've had good results with Ziro filament in the past, but this stuff really is top notch.

A better bronze colour than most others that can be more copper looking. A nice satin sheen

This my third brand of CF reinforced filament - I chose it because the brand that I used before with great results now has lots of reviews agreeing it used to be good but has now gone south! I've tried a range of temperatures on my printer (extruder is Hermera). The material seems non-uniform and produces semi-blockages at irregular intervals. In the left-hand photo you can see my first print - starting at c. 200C. You can see a batch of 4 dips in extrusion to c.65% every meter or so. Each of these resulted in breaks in layers and very poor layer adhesion. I spotted this was happening and increased temperature to 215C. It stayed a bit wobbly so eventually I increased to 225C at which point it seemed to stabalise. But, then that blocked completely and the print failed. Today I tried another go, starting at 230C. This is the second graph. As you can see, extrusion is more regular - but not nearly as good as a normal filament. However, towards the end you can see the c. 3m of badly underextruded material- again a partial blockage. This print did complete, but as you can see from the part photo there are a few poorly extruded layers near the end of the print. In both prints I'm working at maximum stepper current of 1.3A. The second had topped out tension- which I think is why it worked a bit better. Generally structurally strong along the filament and layer adhesion is otherwise OK. So best to take great care with this filament. If you must pick it I would recommend: * higher temperatures * lots of extrusion pressure * small parts * very careful inspection * nothing where a weak layer would cause functional problems for the part.

I buy a lot of Ziro filament as I find it reliable, good quality and good value. Will always be back for more.

Wonderful filament, glowes bright green, especially when charged with UV light. Any glow in the dark filament containing phosphorus seems to be more susceptible to becoming brittle and absorbing moisture - it's the same with this filament, I simply pop it in the filament dryer and it works like new again 😃 this is the best glow in the dark filament I've tried which creates consistent and smooth layered prints

Questo PLA ha in effetti un'ottima finitura, gli oggetti stampati vengono lisci e con pochissime imperfezioni quali bolle o righe di chiusura. Unico difetto è un pò fragile sull'asse Z, ma forse dipende dai settaggi che ho usato. Si stampa anche a velocità sostenuta

Questo filamento è meraviglioso. Ha una finitura matte donata dalle fibre di carbonio. é decisamente più resistente del PLA normale e più rigido. Mai avuto effetti di warping su vetro e lacca e ha una stabilità dimensionale eccellente. Forse sarebbe meglio avvisare gli utenti che è d'obbligo un ugello in acciaio resistente all'usura, visto che il carbonio contenuto nel filamento devasta gli ugelli in ottone aumentandone la dimensione dell'ugello con il passare del tempo. Ora me ne prendo subito un altro!

I was surprised when I saw the price and thought that it couldn’t be true but it actually is it works as intended and sticks really well but you might have a different experience. And you even get cleaning filament for 15€. For me it’s mind blowing .

Filamento di eccellente qualità, nonostante la composizione particolare non consuma l'ugello e presenta quasi meno difficoltà di taratura rispetto al normale PLA. Produce ottimi risultati già a 200°C, lasciando una finitura parzialmente opaca e nessun effetto distintivo al tatto. Con temperature più alte si può rendere l'effetto più lucido, ma aumentando anche leggermente la probabilità di sbavature. Molto tollerante riguardo a velocità e ritrazione, anche a 100mm/s fatica a presentare difetti dove altri filamenti a tinta unita ne mostrerebbero.

Passata l'euforia della novità, si realizza che, agli scopi pratici, è quasi inutile, perché si carica con la luce, ma poi rimane fosforescente veramente poco tempo, a volte anche solo minuti. Io che lo volevo usare per fare delle cornici per gli interruttori delle luci, per trovarli facilmente al buio, dovrò trovare altre soluzioni. Nessun problema per la stampa, invece.